From: Ander Conselvan De Oliveira <conselvan2@gmail.com>
To: "Konduru, Chandra" <chandra.konduru@intel.com>
Cc: "intel-gfx@lists.freedesktop.org" <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 17/19] drm/i915: Convert intel_pipe_will_have_type() to using atomic state
Date: Fri, 20 Mar 2015 08:28:03 +0200 [thread overview]
Message-ID: <1426832883.2316.7.camel@gmail.com> (raw)
In-Reply-To: <76A9B330A4D78C4D99CB292C4CC06C0E36F7D828@fmsmsx101.amr.corp.intel.com>
On Thu, 2015-03-19 at 19:24 +0000, Konduru, Chandra wrote:
>
> > -----Original Message-----
> > From: Conselvan De Oliveira, Ander
> > Sent: Friday, March 13, 2015 2:49 AM
> > To: intel-gfx@lists.freedesktop.org
> > Cc: Konduru, Chandra; Conselvan De Oliveira, Ander
> > Subject: [PATCH 17/19] drm/i915: Convert intel_pipe_will_have_type() to using
> > atomic state
> >
> > Pass a crtc_state to it and find whether the pipe has an encoder of a given type
> > by looking at the drm_atomic_state the crtc_state points to.
> >
> > Until recently i9xx_get_refclk() used to be called indirectly from
> > vlv_force_pll_on() with a dummy crtc_state. That dummy crtc state is not
> > converted to be part of a full drm atomic state, so add a WARN in case someone
> > decides to call that again with such a dummy state.
> >
> > v2: Warn if there is no connectors for a given crtc. (Daniel)
> > Replace comment i9xx_get_refclk() with a WARN_ON(). (Ander)
> >
> > Signed-off-by: Ander Conselvan de Oliveira
> > <ander.conselvan.de.oliveira@intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 2 +-
> > drivers/gpu/drm/i915/intel_display.c | 133 +++++++++++++++++++++-------------
> > -
> > 2 files changed, 83 insertions(+), 52 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 490ab8c..576e101 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -541,7 +541,7 @@ struct drm_i915_display_funcs {
> > * Returns true on success, false on failure.
> > */
> > bool (*find_dpll)(const struct intel_limit *limit,
> > - struct intel_crtc *crtc,
> > + struct intel_crtc_state *crtc_state,
> > int target, int refclk,
> > struct dpll *match_clock,
> > struct dpll *best_clock);
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index 8c97186..be1979e 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -431,25 +431,41 @@ bool intel_pipe_has_type(struct intel_crtc *crtc,
> > enum intel_output_type type)
> > * intel_pipe_has_type() but looking at encoder->new_crtc instead of
> > * encoder->crtc.
> > */
> > -static bool intel_pipe_will_have_type(struct intel_crtc *crtc, int type)
> > +static bool intel_pipe_will_have_type(const struct intel_crtc_state *crtc_state,
> > + int type)
> > {
> > - struct drm_device *dev = crtc->base.dev;
> > + struct drm_atomic_state *state = crtc_state->base.state;
> > + struct drm_connector_state *connector_state;
> > struct intel_encoder *encoder;
> > + int i, num_connectors = 0;
> > +
> > + for (i = 0; i < state->num_connector; i++) {
> > + if (!state->connectors[i])
> > + continue;
> > +
> > + connector_state = state->connector_states[i];
> > + if (connector_state->crtc != crtc_state->base.crtc)
> > + continue;
> > +
> > + num_connectors++;
>
> Above piece of code to loop through state->connectors[] is present in
> multiple places, can you have a helper something like below to save
> some typing and code reduction?
>
> struct connector_state * intel_crtc_state_connector(crtc_state, crtc);
>
> also similarily for encoder
> struct encoder_state *intel_crtc_state_encoder(crtc_state, crtc);
This wouldn't work for cloned setups, where we have more than one
connector/encoder in a single pipe.
Ander
> >
> > - for_each_intel_encoder(dev, encoder)
> > - if (encoder->new_crtc == crtc && encoder->type == type)
> > + encoder = to_intel_encoder(connector_state->best_encoder);
> > + if (encoder->type == type)
> > return true;
> > + }
> > +
> > + WARN_ON(num_connectors == 0);
> >
> > return false;
> > }
> >
> > -static const intel_limit_t *intel_ironlake_limit(struct intel_crtc *crtc,
> > - int refclk)
> > +static const intel_limit_t *
> > +intel_ironlake_limit(struct intel_crtc_state *crtc_state, int refclk)
> > {
> > - struct drm_device *dev = crtc->base.dev;
> > + struct drm_device *dev = crtc_state->base.crtc->dev;
> > const intel_limit_t *limit;
> >
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
> > + if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
> > if (intel_is_dual_link_lvds(dev)) {
> > if (refclk == 100000)
> > limit = &intel_limits_ironlake_dual_lvds_100m;
> > @@ -467,20 +483,21 @@ static const intel_limit_t *intel_ironlake_limit(struct
> > intel_crtc *crtc,
> > return limit;
> > }
> >
> > -static const intel_limit_t *intel_g4x_limit(struct intel_crtc *crtc)
> > +static const intel_limit_t *
> > +intel_g4x_limit(struct intel_crtc_state *crtc_state)
> > {
> > - struct drm_device *dev = crtc->base.dev;
> > + struct drm_device *dev = crtc_state->base.crtc->dev;
> > const intel_limit_t *limit;
> >
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
> > + if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
> > if (intel_is_dual_link_lvds(dev))
> > limit = &intel_limits_g4x_dual_channel_lvds;
> > else
> > limit = &intel_limits_g4x_single_channel_lvds;
> > - } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_HDMI) ||
> > - intel_pipe_will_have_type(crtc, INTEL_OUTPUT_ANALOG)) {
> > + } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI)
> > ||
> > + intel_pipe_will_have_type(crtc_state,
> > INTEL_OUTPUT_ANALOG)) {
> > limit = &intel_limits_g4x_hdmi;
> > - } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_SDVO)) {
> > + } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO)) {
> > limit = &intel_limits_g4x_sdvo;
> > } else /* The option is for other outputs */
> > limit = &intel_limits_i9xx_sdvo;
> > @@ -488,17 +505,18 @@ static const intel_limit_t *intel_g4x_limit(struct
> > intel_crtc *crtc)
> > return limit;
> > }
> >
> > -static const intel_limit_t *intel_limit(struct intel_crtc *crtc, int refclk)
> > +static const intel_limit_t *
> > +intel_limit(struct intel_crtc_state *crtc_state, int refclk)
> > {
> > - struct drm_device *dev = crtc->base.dev;
> > + struct drm_device *dev = crtc_state->base.crtc->dev;
> > const intel_limit_t *limit;
> >
> > if (HAS_PCH_SPLIT(dev))
> > - limit = intel_ironlake_limit(crtc, refclk);
> > + limit = intel_ironlake_limit(crtc_state, refclk);
> > else if (IS_G4X(dev)) {
> > - limit = intel_g4x_limit(crtc);
> > + limit = intel_g4x_limit(crtc_state);
> > } else if (IS_PINEVIEW(dev)) {
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
> > + if (intel_pipe_will_have_type(crtc_state,
> > INTEL_OUTPUT_LVDS))
> > limit = &intel_limits_pineview_lvds;
> > else
> > limit = &intel_limits_pineview_sdvo; @@ -507,14
> > +525,14 @@ static const intel_limit_t *intel_limit(struct intel_crtc *crtc, int
> > refclk)
> > } else if (IS_VALLEYVIEW(dev)) {
> > limit = &intel_limits_vlv;
> > } else if (!IS_GEN2(dev)) {
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
> > + if (intel_pipe_will_have_type(crtc_state,
> > INTEL_OUTPUT_LVDS))
> > limit = &intel_limits_i9xx_lvds;
> > else
> > limit = &intel_limits_i9xx_sdvo;
> > } else {
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
> > + if (intel_pipe_will_have_type(crtc_state,
> > INTEL_OUTPUT_LVDS))
> > limit = &intel_limits_i8xx_lvds;
> > - else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_DVO))
> > + else if (intel_pipe_will_have_type(crtc_state,
> > INTEL_OUTPUT_DVO))
> > limit = &intel_limits_i8xx_dvo;
> > else
> > limit = &intel_limits_i8xx_dac;
> > @@ -601,15 +619,17 @@ static bool intel_PLL_is_valid(struct drm_device *dev,
> > }
> >
> > static bool
> > -i9xx_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
> > +i9xx_find_best_dpll(const intel_limit_t *limit,
> > + struct intel_crtc_state *crtc_state,
> > int target, int refclk, intel_clock_t *match_clock,
> > intel_clock_t *best_clock)
> > {
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> > struct drm_device *dev = crtc->base.dev;
> > intel_clock_t clock;
> > int err = target;
> >
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
> > + if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
> > /*
> > * For LVDS just rely on its current settings for dual-channel.
> > * We haven't figured out how to reliably set up different @@ -
> > 662,15 +682,17 @@ i9xx_find_best_dpll(const intel_limit_t *limit, struct
> > intel_crtc *crtc, }
> >
> > static bool
> > -pnv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
> > +pnv_find_best_dpll(const intel_limit_t *limit,
> > + struct intel_crtc_state *crtc_state,
> > int target, int refclk, intel_clock_t *match_clock,
> > intel_clock_t *best_clock)
> > {
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> > struct drm_device *dev = crtc->base.dev;
> > intel_clock_t clock;
> > int err = target;
> >
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
> > + if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
> > /*
> > * For LVDS just rely on its current settings for dual-channel.
> > * We haven't figured out how to reliably set up different @@ -
> > 721,10 +743,12 @@ pnv_find_best_dpll(const intel_limit_t *limit, struct
> > intel_crtc *crtc, }
> >
> > static bool
> > -g4x_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
> > +g4x_find_best_dpll(const intel_limit_t *limit,
> > + struct intel_crtc_state *crtc_state,
> > int target, int refclk, intel_clock_t *match_clock,
> > intel_clock_t *best_clock)
> > {
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> > struct drm_device *dev = crtc->base.dev;
> > intel_clock_t clock;
> > int max_n;
> > @@ -733,7 +757,7 @@ g4x_find_best_dpll(const intel_limit_t *limit, struct
> > intel_crtc *crtc,
> > int err_most = (target >> 8) + (target >> 9);
> > found = false;
> >
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
> > + if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
> > if (intel_is_dual_link_lvds(dev))
> > clock.p2 = limit->p2.p2_fast;
> > else
> > @@ -778,10 +802,12 @@ g4x_find_best_dpll(const intel_limit_t *limit, struct
> > intel_crtc *crtc, }
> >
> > static bool
> > -vlv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
> > +vlv_find_best_dpll(const intel_limit_t *limit,
> > + struct intel_crtc_state *crtc_state,
> > int target, int refclk, intel_clock_t *match_clock,
> > intel_clock_t *best_clock)
> > {
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> > struct drm_device *dev = crtc->base.dev;
> > intel_clock_t clock;
> > unsigned int bestppm = 1000000;
> > @@ -835,10 +861,12 @@ vlv_find_best_dpll(const intel_limit_t *limit, struct
> > intel_crtc *crtc, }
> >
> > static bool
> > -chv_find_best_dpll(const intel_limit_t *limit, struct intel_crtc *crtc,
> > +chv_find_best_dpll(const intel_limit_t *limit,
> > + struct intel_crtc_state *crtc_state,
> > int target, int refclk, intel_clock_t *match_clock,
> > intel_clock_t *best_clock)
> > {
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> > struct drm_device *dev = crtc->base.dev;
> > intel_clock_t clock;
> > uint64_t m2;
> > @@ -5726,7 +5754,7 @@ static int intel_crtc_compute_config(struct intel_crtc
> > *crtc,
> > * - LVDS dual channel mode
> > * - Double wide pipe
> > */
> > - if ((intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
> > + if ((intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_LVDS) &&
> > intel_is_dual_link_lvds(dev)) || pipe_config->double_wide)
> > pipe_config->pipe_src_w &= ~1;
> >
> > @@ -5905,15 +5933,18 @@ static inline bool intel_panel_use_ssc(struct
> > drm_i915_private *dev_priv)
> > && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE); }
> >
> > -static int i9xx_get_refclk(struct intel_crtc *crtc, int num_connectors)
> > +static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
> > + int num_connectors)
> > {
> > - struct drm_device *dev = crtc->base.dev;
> > + struct drm_device *dev = crtc_state->base.crtc->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > int refclk;
> >
> > + WARN_ON(!crtc_state->base.state);
> > +
> > if (IS_VALLEYVIEW(dev)) {
> > refclk = 100000;
> > - } else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
> > + } else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)
> > &&
> > intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
> > refclk = dev_priv->vbt.lvds_ssc_freq;
> > DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
> > refclk); @@ -5956,7 +5987,7 @@ static void i9xx_update_pll_dividers(struct
> > intel_crtc *crtc,
> > crtc_state->dpll_hw_state.fp0 = fp;
> >
> > crtc->lowfreq_avail = false;
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
> > + if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
> > reduced_clock && i915.powersave) {
> > crtc_state->dpll_hw_state.fp1 = fp2;
> > crtc->lowfreq_avail = true;
> > @@ -6314,6 +6345,7 @@ void vlv_force_pll_on(struct drm_device *dev, enum
> > pipe pipe,
> > struct intel_crtc *crtc =
> > to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe));
> > struct intel_crtc_state pipe_config = {
> > + .base.crtc = &crtc->base,
> > .pixel_multiplier = 1,
> > .dpll = *dpll,
> > };
> > @@ -6358,12 +6390,12 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
> >
> > i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
> >
> > - is_sdvo = intel_pipe_will_have_type(crtc, INTEL_OUTPUT_SDVO) ||
> > - intel_pipe_will_have_type(crtc, INTEL_OUTPUT_HDMI);
> > + is_sdvo = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_SDVO)
> > ||
> > + intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_HDMI);
> >
> > dpll = DPLL_VGA_MODE_DIS;
> >
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS))
> > + if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS))
> > dpll |= DPLLB_MODE_LVDS;
> > else
> > dpll |= DPLLB_MODE_DAC_SERIAL;
> > @@ -6406,7 +6438,7 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
> >
> > if (crtc_state->sdvo_tv_clock)
> > dpll |= PLL_REF_INPUT_TVCLKINBC;
> > - else if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
> > + else if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
> > intel_panel_use_ssc(dev_priv) && num_connectors < 2)
> > dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
> > else
> > @@ -6436,7 +6468,7 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
> >
> > dpll = DPLL_VGA_MODE_DIS;
> >
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS)) {
> > + if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS)) {
> > dpll |= (1 << (clock->p1 - 1)) <<
> > DPLL_FPA01_P1_POST_DIV_SHIFT;
> > } else {
> > if (clock->p1 == 2)
> > @@ -6447,10 +6479,10 @@ static void i8xx_update_pll(struct intel_crtc *crtc,
> > dpll |= PLL_P2_DIVIDE_BY_4;
> > }
> >
> > - if (!IS_I830(dev) && intel_pipe_will_have_type(crtc,
> > INTEL_OUTPUT_DVO))
> > + if (!IS_I830(dev) && intel_pipe_will_have_type(crtc_state,
> > +INTEL_OUTPUT_DVO))
> > dpll |= DPLL_DVO_2X_MODE;
> >
> > - if (intel_pipe_will_have_type(crtc, INTEL_OUTPUT_LVDS) &&
> > + if (intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS) &&
> > intel_panel_use_ssc(dev_priv) && num_connectors < 2)
> > dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
> > else
> > @@ -6687,7 +6719,7 @@ static int i9xx_crtc_compute_clock(struct intel_crtc
> > *crtc,
> > return 0;
> >
> > if (!crtc_state->clock_set) {
> > - refclk = i9xx_get_refclk(crtc, num_connectors);
> > + refclk = i9xx_get_refclk(crtc_state, num_connectors);
> >
> > /*
> > * Returns a set of divisors for the desired target clock with @@
> > -6695,8 +6727,8 @@ static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
> > * the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n +
> > * 2) / p1 / p2.
> > */
> > - limit = intel_limit(crtc, refclk);
> > - ok = dev_priv->display.find_dpll(limit, crtc,
> > + limit = intel_limit(crtc_state, refclk);
> > + ok = dev_priv->display.find_dpll(limit, crtc_state,
> > crtc_state->port_clock,
> > refclk, NULL, &clock);
> > if (!ok) {
> > @@ -6712,7 +6744,7 @@ static int i9xx_crtc_compute_clock(struct intel_crtc
> > *crtc,
> > * we will disable the LVDS downclock feature.
> > */
> > has_reduced_clock =
> > - dev_priv->display.find_dpll(limit, crtc,
> > + dev_priv->display.find_dpll(limit, crtc_state,
> > dev_priv-
> > >lvds_downclock,
> > refclk, &clock,
> > &reduced_clock);
> > @@ -7540,12 +7572,11 @@ static bool ironlake_compute_clocks(struct
> > drm_crtc *crtc, {
> > struct drm_device *dev = crtc->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > int refclk;
> > const intel_limit_t *limit;
> > bool ret, is_lvds = false;
> >
> > - is_lvds = intel_pipe_will_have_type(intel_crtc, INTEL_OUTPUT_LVDS);
> > + is_lvds = intel_pipe_will_have_type(crtc_state, INTEL_OUTPUT_LVDS);
> >
> > refclk = ironlake_get_refclk(crtc);
> >
> > @@ -7554,8 +7585,8 @@ static bool ironlake_compute_clocks(struct drm_crtc
> > *crtc,
> > * refclk, or FALSE. The returned values represent the clock equation:
> > * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
> > */
> > - limit = intel_limit(intel_crtc, refclk);
> > - ret = dev_priv->display.find_dpll(limit, intel_crtc,
> > + limit = intel_limit(crtc_state, refclk);
> > + ret = dev_priv->display.find_dpll(limit, crtc_state,
> > crtc_state->port_clock,
> > refclk, NULL, clock);
> > if (!ret)
> > @@ -7569,7 +7600,7 @@ static bool ironlake_compute_clocks(struct drm_crtc
> > *crtc,
> > * downclock feature.
> > */
> > *has_reduced_clock =
> > - dev_priv->display.find_dpll(limit, intel_crtc,
> > + dev_priv->display.find_dpll(limit, crtc_state,
> > dev_priv->lvds_downclock,
> > refclk, clock,
> > reduced_clock);
> > --
> > 2.1.0
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-03-20 6:28 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-13 9:48 [PATCH v2 00/19] Remove depencies on staged config for atomic transition Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 01/19] drm/i915: Add intel_atomic_get_crtc_state() helper function Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 02/19] drm/i915: Pass acquire ctx also to intel_release_load_detect_pipe() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 03/19] drm/i915: Allocate a drm_atomic_state for the legacy modeset code Ander Conselvan de Oliveira
2015-03-17 6:46 ` [PATCH v3] " Ander Conselvan de Oliveira
2015-03-18 7:57 ` [PATCH v4] " Ander Conselvan de Oliveira
2015-03-18 23:57 ` Konduru, Chandra
2015-03-19 7:50 ` Ander Conselvan De Oliveira
2015-03-19 21:08 ` [PATCH 03/19] " Konduru, Chandra
2015-03-20 7:00 ` Ander Conselvan De Oliveira
2015-03-22 16:28 ` Konduru, Chandra
2015-03-13 9:48 ` [PATCH 04/19] drm/i915: Allocate a crtc_state also when the crtc is being disabled Ander Conselvan de Oliveira
[not found] ` <76A9B330A4D78C4D99CB292C4CC06C0E36F7B41B@fmsmsx101.amr.corp.intel.com>
2015-03-19 7:52 ` Ander Conselvan De Oliveira
2015-03-19 23:23 ` Konduru, Chandra
2015-03-20 8:40 ` Ander Conselvan De Oliveira
2015-03-20 9:51 ` Daniel Vetter
2015-03-20 10:06 ` Ander Conselvan De Oliveira
2015-03-20 10:39 ` Daniel Vetter
2015-03-22 16:46 ` Konduru, Chandra
2015-03-13 9:48 ` [PATCH 05/19] drm/i915: Update dummy connector atomic state with current config Ander Conselvan de Oliveira
2015-03-19 20:55 ` Konduru, Chandra
2015-03-20 6:41 ` Ander Conselvan De Oliveira
2015-03-13 9:48 ` [PATCH 06/19] drm/i915: Implement connector state duplication Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 07/19] drm/i915: Copy the staged connector config to the legacy atomic state Ander Conselvan de Oliveira
[not found] ` <76A9B330A4D78C4D99CB292C4CC06C0E36F7B6F0@fmsmsx101.amr.corp.intel.com>
2015-03-19 7:52 ` Ander Conselvan De Oliveira
2015-03-19 15:15 ` Daniel Vetter
2015-03-13 9:48 ` [PATCH 08/19] drm/i915: Don't use encoder->new_crtc in intel_modeset_pipe_config() Ander Conselvan de Oliveira
2015-03-19 0:44 ` Konduru, Chandra
2015-03-19 7:52 ` Ander Conselvan De Oliveira
2015-03-13 9:48 ` [PATCH 09/19] drm/i915: Don't use encoder->new_crtc in compute_baseline_pipe_bpp() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 10/19] drm/i915: Don't depend on encoder->new_crtc in intel_dp_compute_config() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 11/19] drm/i915: Don't depend on encoder->new_crtc in intel_hdmi_compute_config Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 12/19] drm/i915: Use atomic state in intel_ddi_crtc_get_new_encoder() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 13/19] drm/i915: Don't use staged config in intel_dp_mst_compute_config() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 14/19] drm/i915: Don't use encoder->new_crtc in intel_lvds_compute_config() Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 15/19] drm/i915: Pass an atomic state to modeset_global_resources() functions Ander Conselvan de Oliveira
2015-03-13 9:48 ` [PATCH 16/19] drm/i915: Check lane sharing between pipes B & C using atomic state Ander Conselvan de Oliveira
2015-03-19 20:58 ` Konduru, Chandra
2015-03-20 6:46 ` Conselvan De Oliveira, Ander
2015-03-22 16:20 ` Konduru, Chandra
2015-03-23 7:33 ` Ander Conselvan De Oliveira
2015-03-23 16:57 ` Konduru, Chandra
2015-03-13 9:49 ` [PATCH 17/19] drm/i915: Convert intel_pipe_will_have_type() to " Ander Conselvan de Oliveira
2015-03-19 19:24 ` Konduru, Chandra
2015-03-20 6:28 ` Ander Conselvan De Oliveira [this message]
2015-03-22 16:14 ` Konduru, Chandra
2015-03-13 9:49 ` [PATCH 18/19] drm/i915: Don't look at staged config crtc when changing DRRS state Ander Conselvan de Oliveira
2015-03-13 9:49 ` [PATCH 19/19] drm/i915: Remove usage of encoder->new_crtc from clock computations Ander Conselvan de Oliveira
2015-03-14 0:29 ` shuang.he
2015-03-19 20:39 ` Konduru, Chandra
2015-03-18 23:57 ` [PATCH v2 00/19] Remove depencies on staged config for atomic transition Konduru, Chandra
2015-03-19 15:20 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426832883.2316.7.camel@gmail.com \
--to=conselvan2@gmail.com \
--cc=chandra.konduru@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox