From: Todd Previte <tprevite@gmail.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 05/11] drm/i915: Add a delay in Displayport AUX transactions for compliance testing
Date: Fri, 10 Apr 2015 09:12:46 -0700 [thread overview]
Message-ID: <1428682372-21586-6-git-send-email-tprevite@gmail.com> (raw)
In-Reply-To: <1428682372-21586-1-git-send-email-tprevite@gmail.com>
The Displayport Link Layer Compliance Testing Specification 1.2 rev 1.1
specifies that repeated AUX transactions after a failure (no response /
invalid response) must have a minimum delay of 400us before the resend can
occur. Tests 4.2.1.1 and 4.2.1.2 are two tests that require this specifically.
Also, the check for DP_AUX_CH_CTL_TIME_OUT_ERROR has been moved out into a
separate case. This case just continues with the next iteration of the loop
as the HW has already waited the required amount of time.
V2:
- Changed udelay() to usleep_range()
V3:
- Removed extraneous check for timeout
- Updated comment to reflect this change
V4:
- Reformatted a comment
V5:
- Added separate check for HW timeout on AUX transactions. A message
is logged upon detection of this case.
V6:
- Add continue statement to HW timeout detect case
- Remove the log message indicating a timeout has been
detected (review feedback)
V7:
- Updated the commit message to remove verbage about the HW timeout
case that is no longer valid.
Signed-off-by: Todd Previte <tprevite@gmail.com>
---
drivers/gpu/drm/i915/intel_dp.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index a5dfaff..77b6b15 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -877,9 +877,18 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
DP_AUX_CH_CTL_TIME_OUT_ERROR |
DP_AUX_CH_CTL_RECEIVE_ERROR);
- if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR |
- DP_AUX_CH_CTL_RECEIVE_ERROR))
+ if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR)
continue;
+
+ /* DP CTS 1.2 Core Rev 1.1, 4.2.1.1 & 4.2.1.2
+ * 400us delay required for errors and timeouts
+ * Timeout errors from the HW already meet this
+ * requirement so skip to next iteration
+ */
+ if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
+ usleep_range(400, 500);
+ continue;
+ }
if (status & DP_AUX_CH_CTL_DONE)
break;
}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-04-10 16:13 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-10 16:12 [intel-gfx][PATCH V5] Displayport compliance testing V5 Todd Previte
2015-04-10 16:12 ` [PATCH 01/11] drm/i915: Add automated testing support for Displayport compliance testing Todd Previte
2015-04-13 17:30 ` Paulo Zanoni
2015-04-10 16:12 ` [PATCH 02/11] drm/i915: Ignore disconnected Displayport connectors in check_link_status Todd Previte
2015-04-10 16:12 ` [PATCH 03/11] drm/i915: Move the DPCD read further up in intel_dp_check_link_status() Todd Previte
2015-04-14 17:48 ` Todd Previte
2015-04-10 16:12 ` [PATCH 04/11] drm/i915: Add EDID read in intel_dp_check_link_status() for Link CTS 4.2.2.1 Todd Previte
2015-04-13 14:10 ` Paulo Zanoni
2015-04-13 14:57 ` Todd Previte
2015-04-13 14:53 ` [PATCH 04/13] " Todd Previte
2015-04-14 16:53 ` Paulo Zanoni
2015-04-15 8:48 ` Daniel Vetter
2015-04-15 15:37 ` Todd Previte
2015-04-15 17:42 ` Paulo Zanoni
2015-04-16 15:41 ` Todd Previte
2015-04-16 16:31 ` Daniel Vetter
2015-04-16 17:32 ` Todd Previte
2015-04-20 5:10 ` Todd Previte
2015-04-10 16:12 ` Todd Previte [this message]
2015-04-13 21:05 ` [PATCH 05/11] drm/i915: Add a delay in Displayport AUX transactions for compliance testing Paulo Zanoni
2015-04-10 16:12 ` [PATCH 06/11] drm/i915: Add supporting structure for Displayport Link CTS test 4.2.2.6 Todd Previte
2015-04-10 17:38 ` [PATCH 06/13] drm: " Todd Previte
2015-04-10 17:45 ` [PATCH 06/11] drm/i915: " Emil Velikov
2015-04-10 17:38 ` Todd Previte
2015-04-13 14:53 ` [PATCH 06/13] drm: " Todd Previte
2015-04-13 22:18 ` Paulo Zanoni
2015-04-15 6:56 ` Todd Previte
2015-04-10 16:12 ` [PATCH 07/11] drm/i915: Update intel_dp_hpd_pulse() for non-MST operation Todd Previte
2015-04-14 11:29 ` Paulo Zanoni
2015-04-14 17:36 ` Todd Previte
2015-04-14 19:00 ` Paulo Zanoni
2015-04-15 2:00 ` Todd Previte
2015-04-10 16:12 ` [PATCH 08/11] drm/i915: Support EDID compliance tests with the intel_dp_autotest_edid() function Todd Previte
2015-04-10 17:42 ` [PATCH 08/13] " Todd Previte
2015-04-14 13:35 ` Paulo Zanoni
2015-04-14 17:42 ` Todd Previte
2015-04-10 16:12 ` [PATCH 09/11] drm/i915: Fix for DP CTS test 4.2.2.5 - I2C DEFER handling Todd Previte
2015-04-10 17:41 ` [PATCH 09/13] drm: " Todd Previte
2015-04-10 16:12 ` [PATCH 10/11] drm/i915: Add debugfs test control files for Displayport compliance testing Todd Previte
2015-04-10 16:12 ` [PATCH 11/11] drm: Fix the 'native defer' message in drm_dp_i2c_do_msg() Todd Previte
2015-04-10 16:18 ` Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428682372-21586-6-git-send-email-tprevite@gmail.com \
--to=tprevite@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox