From: Imre Deak <imre.deak@intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 26/49] drm/i915/bxt: Add BXT support in gen8_irq functions
Date: Mon, 13 Apr 2015 16:58:00 +0300 [thread overview]
Message-ID: <1428933480.29827.92.camel@intel.com> (raw)
In-Reply-To: <87bnisp255.fsf@intel.com>
On ma, 2015-04-13 at 16:51 +0300, Jani Nikula wrote:
> On Fri, 10 Apr 2015, Imre Deak <imre.deak@intel.com> wrote:
> > From: Shashank Sharma <shashank.sharma@intel.com>
> >
> > This patch adds conditional checks in gen8_irq functions
> > to support BXT. Most of the checks just look for PCH split
> > availability, and block the call to PCH interrupt functions if
> > not available.
> >
> > v2: (jani)
> > - drop redundant TODO comment about PCH IRQ flags on BXT
> > - check HAS_PCH_SPLIT instead of IS_BROXTON when handling PCH specific
> > IRQ events in gen8_irq_handler()
> > - check HAS_PCH_SPLIT before calling the function instead of a
> > corresponding early return within the called function for
> > ibx_irq_reset(), ibx_irq_pre_postinstall(), ibx_irq_postinstall()
> >
> > Reviewed-by: Satheeshakrishna M<satheeshakrishna.m@intel.com>
> > Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
> > Signed-off-by: Shashank Sharma <ppashank.sharma@intel.com>
> > Signed-off-by: Imre Deak <imre.deak@intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_irq.c | 21 ++++++++++++++-------
> > 1 file changed, 14 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> > index b06364f..a185f44 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -2297,7 +2297,8 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
> > DRM_ERROR("The master control interrupt lied (DE PIPE)!\n");
> > }
> >
> > - if (!HAS_PCH_NOP(dev) && master_ctl & GEN8_DE_PCH_IRQ) {
> > + if (HAS_PCH_SPLIT(dev) && !HAS_PCH_NOP(dev) &&
> > + master_ctl & GEN8_DE_PCH_IRQ) {
> > /*
> > * FIXME(BDW): Assume for now that the new interrupt handling
> > * scheme also closed the SDE interrupt handling race we've seen
> > @@ -3073,7 +3074,8 @@ static void ironlake_irq_reset(struct drm_device *dev)
> >
> > gen5_gt_irq_reset(dev);
> >
> > - ibx_irq_reset(dev);
> > + if (HAS_PCH_SPLIT(dev))
> > + ibx_irq_reset(dev);
> > }
> >
> > static void vlv_display_irq_reset(struct drm_i915_private *dev_priv)
> > @@ -3133,7 +3135,8 @@ static void gen8_irq_reset(struct drm_device *dev)
> > GEN5_IRQ_RESET(GEN8_DE_MISC_);
> > GEN5_IRQ_RESET(GEN8_PCU_);
> >
> > - ibx_irq_reset(dev);
> > + if (HAS_PCH_SPLIT(dev))
> > + ibx_irq_reset(dev);
> > }
> >
> > void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv,
> > @@ -3323,13 +3326,15 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
> >
> > I915_WRITE(HWSTAM, 0xeffe);
> >
> > - ibx_irq_pre_postinstall(dev);
> > + if (HAS_PCH_SPLIT(dev))
> > + ibx_irq_pre_postinstall(dev);
> >
> > GEN5_IRQ_INIT(DE, dev_priv->irq_mask, display_mask | extra_mask);
> >
> > gen5_gt_irq_postinstall(dev);
> >
> > - ibx_irq_postinstall(dev);
> > + if (HAS_PCH_SPLIT(dev))
> > + ibx_irq_postinstall(dev);
>
> /me scratches head, we shouldn't ever call ironlake_irq_postinstall on
> bxt, should we? Did I miss something?
Nope, I just added the check blindly to all call sites. But here
HAS_PCH_SPLIT happens to be true of course, so yea it's not needed.
> With this hunk dropped, I think the patch looks good.
>
> BR,
> Jani.
>
>
> >
> > if (IS_IRONLAKE_M(dev)) {
> > /* Enable PCU event interrupts
> > @@ -3545,12 +3550,14 @@ static int gen8_irq_postinstall(struct drm_device *dev)
> > {
> > struct drm_i915_private *dev_priv = dev->dev_private;
> >
> > - ibx_irq_pre_postinstall(dev);
> > + if (HAS_PCH_SPLIT(dev))
> > + ibx_irq_pre_postinstall(dev);
> >
> > gen8_gt_irq_postinstall(dev_priv);
> > gen8_de_irq_postinstall(dev_priv);
> >
> > - ibx_irq_postinstall(dev);
> > + if (HAS_PCH_SPLIT(dev))
> > + ibx_irq_postinstall(dev);
> >
> > I915_WRITE(GEN8_MASTER_IRQ, DE_MASTER_IRQ_CONTROL);
> > POSTING_READ(GEN8_MASTER_IRQ);
> > --
> > 1.9.1
> >
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-04-13 13:58 UTC|newest]
Thread overview: 191+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-17 9:39 [PATCH 00/49] Basic Broxton enabling Imre Deak
2015-03-17 9:39 ` [PATCH 01/49] drm/i915/bxt: Add BXT PCI ids Imre Deak
2015-03-23 9:56 ` Antti Koskipää
2015-03-17 9:39 ` [PATCH 02/49] drm/i915/bxt: BXT FBC enablement Imre Deak
2015-03-17 17:49 ` Rodrigo Vivi
2015-03-25 20:46 ` Imre Deak
2015-03-26 15:35 ` [PATCH 02.1/49] drm/i915: use proper FBC base register on all new platforms Imre Deak
2015-03-30 10:05 ` Antti Koskipää
2015-03-30 10:04 ` [PATCH 02/49] drm/i915/bxt: BXT FBC enablement Antti Koskipää
2015-03-30 10:04 ` Antti Koskipää
2015-03-17 9:39 ` [PATCH 03/49] drm/i915/bxt: Add IS_BROXTON macro Imre Deak
2015-03-23 9:49 ` Sivakumar Thulasimani
2015-03-17 9:39 ` [PATCH 04/49] drm/i915/bxt: Broxton uses the same GMS values as Skylake Imre Deak
2015-03-23 10:23 ` Antti Koskipää
2015-03-17 9:39 ` [PATCH 05/49] drm/i915/bxt: Enable PTE encoding Imre Deak
2015-03-23 10:23 ` Antti Koskipää
2015-03-17 9:39 ` [PATCH 06/49] drm/i915/bxt: Broxton has 3 sprite planes on pipe A/B, 2 on pipe C Imre Deak
2015-03-23 10:29 ` Antti Koskipää
2015-03-31 11:18 ` Daniel Vetter
2015-03-17 9:39 ` [PATCH 07/49] drm/i915/bxt: Add the plane4 related interrupt definitions Imre Deak
2015-03-23 10:28 ` Antti Koskipää
2015-03-17 9:39 ` [PATCH 08/49] drm/i915/bxt: Broxton DDB is 512 blocks Imre Deak
2015-03-23 10:24 ` Antti Koskipää
2015-03-17 9:39 ` [PATCH 09/49] drm/i915/bxt: Broxton raises the maximum number of planes to 4 Imre Deak
2015-03-23 10:24 ` Antti Koskipää
2015-03-17 9:39 ` [PATCH 10/49] drm/i915/bxt: map GTT as uncached Imre Deak
2015-03-17 10:33 ` Daniel Vetter
2015-03-17 12:31 ` Imre Deak
2015-03-17 13:47 ` Daniel Vetter
2015-03-27 11:07 ` [PATCH v2] " Imre Deak
2015-03-30 10:02 ` Antti Koskipää
2015-03-17 9:39 ` [PATCH 11/49] drm/i915/gen9: fix PIPE_CONTROL flush for VS_INVALIDATE Imre Deak
2015-03-17 10:35 ` Daniel Vetter
2015-04-08 12:56 ` Nick Hoath
2015-03-17 9:39 ` [PATCH 12/49] drm/i915/bxt: HardWare WorkAround ring initialisation for Broxton Imre Deak
2015-03-19 16:47 ` Nick Hoath
2015-03-17 9:39 ` [PATCH 13/49] drm/i915/bxt: add bxt_init_clock_gating Imre Deak
2015-03-19 16:50 ` Nick Hoath
2015-03-20 10:17 ` Imre Deak
2015-03-27 12:00 ` [PATCH v2 " Imre Deak
2015-04-08 9:35 ` Nick Hoath
2015-03-17 9:39 ` [PATCH 14/49] drm/i915/bxt: add GEN8_SDEUNIT_CLOCK_GATE_DISABLE workaround Imre Deak
2015-03-17 10:35 ` Daniel Vetter
2015-03-17 13:06 ` Imre Deak
2015-03-20 9:08 ` Nick Hoath
2015-03-20 10:37 ` Imre Deak
2015-03-25 14:53 ` Nick Hoath
2015-03-17 9:39 ` [PATCH 15/49] drm/i915/bxt: add GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ workaround Imre Deak
2015-04-08 13:04 ` Nick Hoath
2015-04-08 13:10 ` Imre Deak
2015-04-08 13:38 ` Nick Hoath
2015-04-08 13:45 ` Imre Deak
2015-04-08 14:13 ` Nick Hoath
2015-03-17 9:39 ` [PATCH 16/49] drm/i915/bxt: add WaDisableMaskBasedCammingInRCC workaround Imre Deak
2015-03-20 9:05 ` Nick Hoath
2015-03-20 10:25 ` Imre Deak
2015-03-25 14:52 ` Nick Hoath
2015-03-17 9:39 ` [PATCH 17/49] drm/i915/skl: " Imre Deak
2015-03-20 9:07 ` Nick Hoath
2015-03-20 10:33 ` Imre Deak
2015-04-08 13:40 ` Nick Hoath
2015-03-17 9:39 ` [PATCH 18/49] drm/i915/bxt: add workaround to avoid PTE corruption Imre Deak
2015-03-17 10:36 ` Daniel Vetter
2015-03-17 13:30 ` Imre Deak
2015-04-08 13:11 ` Nick Hoath
2015-03-17 9:39 ` [PATCH 19/49] drm/i915/bxt: don't use unsupported port detection Imre Deak
2015-03-25 16:07 ` Jani Nikula
2015-03-17 9:39 ` [PATCH 20/49] drm/i915/bxt: Add change to support gmbus pin pair for BXT Imre Deak
2015-03-25 16:45 ` Jani Nikula
2015-03-17 9:39 ` [PATCH 21/49] drm/i915/bxt: WARN in case BXT unused gmbus ports are accessed Imre Deak
2015-03-25 16:49 ` Jani Nikula
2015-03-17 9:39 ` [PATCH 22/49] drm/i915/bxt: Avoid registering unused gmbus ports as i2c adapter Imre Deak
2015-03-26 17:14 ` Jani Nikula
2015-03-26 22:24 ` Jani Nikula
2015-03-17 9:39 ` [PATCH 23/49] drm/i915/bxt: Increase DDI buf idle timeout Imre Deak
2015-03-17 10:39 ` Daniel Vetter
2015-03-27 12:19 ` [PATCH v2 " Imre Deak
2015-04-08 9:20 ` Jani Nikula
2015-04-08 12:00 ` Daniel Vetter
2015-03-17 9:39 ` [PATCH 24/49] drm/i915/bxt: DDI Hotplug interrupt setup Imre Deak
2015-03-17 10:48 ` Daniel Vetter
2015-03-17 15:39 ` Imre Deak
2015-03-27 12:54 ` [PATCH v6 " Imre Deak
2015-04-08 10:32 ` Jani Nikula
2015-04-10 12:08 ` [PATCH v7 " Imre Deak
2015-04-13 13:41 ` Jani Nikula
2015-03-17 9:39 ` [PATCH 25/49] drm/i915/bxt: Add DDI hpd handler Imre Deak
2015-03-17 10:52 ` Daniel Vetter
2015-03-17 16:03 ` Imre Deak
2015-03-27 15:22 ` [PATCH 25.1/49] drm/i915/bxt: support for HPD long/short status decoding Imre Deak
2015-04-08 10:58 ` Jani Nikula
2015-04-08 11:18 ` Imre Deak
2015-04-08 11:22 ` Jani Nikula
2015-04-08 10:55 ` [PATCH 25/49] drm/i915/bxt: Add DDI hpd handler Jani Nikula
2015-04-10 12:08 ` [PATCH v2 " Imre Deak
2015-04-13 13:45 ` Jani Nikula
2015-03-17 9:39 ` [PATCH 26/49] drm/i915/bxt: Add BXT support in gen8_irq functions Imre Deak
2015-04-08 11:06 ` Jani Nikula
2015-04-10 12:08 ` [PATCH v2 " Imre Deak
2015-04-13 13:51 ` Jani Nikula
2015-04-13 13:58 ` Imre Deak [this message]
2015-04-13 14:48 ` [PATCH v3 " Imre Deak
2015-04-14 7:23 ` Jani Nikula
2015-03-17 9:39 ` [PATCH 27/49] drm/i915/bxt: Enable GMBUS IRQ Imre Deak
2015-04-08 11:11 ` Jani Nikula
2015-04-10 12:08 ` [PATCH v4 " Imre Deak
2015-04-13 13:52 ` Jani Nikula
2015-03-17 9:39 ` [PATCH 28/49] drm/i915/bxt: Define BXT power domains Imre Deak
2015-03-19 17:08 ` Ville Syrjälä
2015-03-17 9:39 ` [PATCH 29/49] drm/i915: Rename vlv_cdclk_freq to cdclk_freq Imre Deak
2015-03-17 10:54 ` Daniel Vetter
2015-03-17 13:20 ` Ville Syrjälä
2015-04-15 19:19 ` Ville Syrjälä
2015-03-17 9:39 ` [PATCH 30/49] drm/i915/bxt: add display initialize/uninitialize sequence Imre Deak
2015-03-19 19:55 ` Ville Syrjälä
2015-03-20 14:10 ` Ville Syrjälä
2015-03-20 17:15 ` Imre Deak
2015-04-02 16:32 ` Ville Syrjälä
2015-04-07 14:07 ` Imre Deak
2015-04-15 13:42 ` [PATCH v4 30/49] drm/i915/bxt: add display initialize/uninitialize sequence (CDCLK) Imre Deak
2015-04-15 14:14 ` Ville Syrjälä
2015-04-15 13:42 ` [PATCH 30.1/49] drm/i915/bxt: add display initialize/uninitialize sequence (PHY) Imre Deak
2015-04-15 14:31 ` Ville Syrjälä
2015-03-17 9:39 ` [PATCH 31/49] drm/i915/bxt: add description about the BXT PHYs Imre Deak
2015-03-19 17:30 ` Ville Syrjälä
2015-04-15 13:42 ` [PATCH v2 " Imre Deak
2015-04-15 13:54 ` Ville Syrjälä
2015-03-17 9:39 ` [PATCH 32/49] drm/i915/bxt: Implement enable/disable for Display C9 state Imre Deak
2015-04-12 10:32 ` sagar.a.kamble
2015-04-13 10:09 ` Imre Deak
2015-04-13 10:25 ` Sagar Arun Kamble
2015-04-16 7:19 ` Daniel Vetter
2015-03-17 9:39 ` [PATCH 33/49] drm/i915/bxt: Add DC9 Trigger sequence Imre Deak
2015-03-30 12:19 ` sagar.a.kamble
2015-04-15 14:13 ` [PATCH v4 " Imre Deak
2015-03-17 9:40 ` [PATCH 34/49] drm/i915/bxt: Restrict PORT_CLK_SEL programming below gen9 Imre Deak
2015-04-15 14:15 ` [PATCH v3 " Imre Deak
2015-04-15 18:55 ` Sagar Arun Kamble
2015-03-17 9:40 ` [PATCH 35/49] drm/i915/bxt: fix panel fitter setup in crtc disable/enable Imre Deak
2015-03-17 13:51 ` Daniel Vetter
2015-03-17 14:22 ` Imre Deak
2015-03-18 8:37 ` Daniel Vetter
2015-03-18 10:31 ` Imre Deak
2015-04-12 10:14 ` sagar.a.kamble
2015-04-12 10:19 ` sagar.a.kamble
2015-04-13 9:21 ` Daniel Vetter
2015-04-12 10:22 ` [PATCH 34/49] drm/i915/bxt: Restrict PORT_CLK_SEL programming below gen9 sagar.a.kamble
2015-04-13 13:21 ` Damien Lespiau
2015-04-13 13:30 ` Imre Deak
2015-04-15 14:18 ` [PATCH v2 35/49] drm/i915/bxt: fix panel fitter setup in crtc disable/enable Imre Deak
2015-03-17 9:40 ` [PATCH 36/49] drm/i915/bxt: Define bxt DDI PLLs and implement enable/disable sequence Imre Deak
2015-03-19 20:27 ` Jesse Barnes
2015-03-19 20:33 ` Imre Deak
2015-03-17 9:40 ` [PATCH 37/49] drm/i915: factor out vlv_PLL_is_optimal Imre Deak
2015-03-19 20:31 ` Jesse Barnes
2015-03-17 9:40 ` [PATCH 38/49] drm/i915: check for div-by-zero in vlv_PLL_is_optimal Imre Deak
2015-03-19 20:31 ` Jesse Barnes
2015-03-20 10:00 ` Daniel Vetter
2015-03-17 9:40 ` [PATCH 39/49] drm/i915/chv: use vlv_PLL_is_optimal in chv_find_best_dpll Imre Deak
2015-03-19 20:34 ` Jesse Barnes
2015-03-19 20:55 ` Imre Deak
2015-03-19 20:56 ` Jesse Barnes
2015-03-20 10:02 ` Daniel Vetter
2015-03-17 9:40 ` [PATCH 40/49] drm/i915/bxt: add bxt_find_best_dpll Imre Deak
2015-03-19 20:39 ` Jesse Barnes
2015-03-17 9:40 ` [PATCH 41/49] drm/i915/bxt: BXT clock divider calculation Imre Deak
2015-03-19 20:46 ` Jesse Barnes
2015-03-17 9:40 ` [PATCH 42/49] drm/i915/bxt: Assign PLL for pipe Imre Deak
2015-03-19 20:48 ` Jesse Barnes
2015-04-16 9:32 ` Daniel Vetter
2015-03-17 9:40 ` [PATCH 43/49] drm/i915/bxt: Determine PLL attached to pipe Imre Deak
2015-03-19 20:48 ` Jesse Barnes
2015-03-17 9:40 ` [PATCH 44/49] drm/i915/bxt: Determine programmed frequency Imre Deak
2015-03-19 20:51 ` Jesse Barnes
2015-03-17 9:40 ` [PATCH 45/49] drm/i915: suppress false PLL state warnings on non-GMCH platforms Imre Deak
2015-03-19 20:53 ` Jesse Barnes
2015-03-19 20:57 ` Imre Deak
2015-03-19 21:19 ` Jesse Barnes
2015-03-17 9:40 ` [PATCH 46/49] drm/i915: Iterate through the initialized DDIs to prepare their buffers Imre Deak
2015-03-23 10:51 ` Sivakumar Thulasimani
2015-03-25 15:04 ` Damien Lespiau
2015-04-24 12:47 ` Ander Conselvan De Oliveira
2015-04-24 15:22 ` Imre Deak
2015-03-17 9:40 ` [PATCH 47/49] drm/i915: Don't write the HDMI buffer translation entry when not needed Imre Deak
2015-03-23 10:57 ` Sivakumar Thulasimani
2015-03-17 9:40 ` [PATCH 48/49] drm/i915/bxt: VSwing programming sequence Imre Deak
2015-03-24 9:19 ` Sivakumar Thulasimani
2015-04-09 17:14 ` Imre Deak
2015-03-17 9:40 ` [PATCH 49/49] drm/i915/bxt: Update max level of vswing Imre Deak
2015-03-17 18:22 ` shuang.he
2015-03-24 10:26 ` Sivakumar Thulasimani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428933480.29827.92.camel@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox