From: han.lu@intel.com
To: daniel.vetter@intel.com, tiwai@suse.de, jani.nikula@intel.com,
libin.yang@intel.com, mengdong.lin@intel.com,
intel-gfx@lists.freedesktop.org
Cc: "Lu, Han" <han.lu@intel.com>
Subject: [PATCH-V3 1/2] drm/i915/audio: add codec wakeup override enabled/disable callback
Date: Wed, 29 Apr 2015 17:49:25 +0800 [thread overview]
Message-ID: <1430300966-19331-1-git-send-email-han.lu@intel.com> (raw)
From: "Lu, Han" <han.lu@intel.com>
Add support for enabling codec wakeup override signal to allow
re-enumeration of the controller on SKL after resume from low power state.
v3 by Jani: Simplify to only support toggling the appropriate chicken bit.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 36805b6..435c372 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6881,6 +6881,9 @@ enum skl_disp_power_wells {
#define AUDIO_CP_READY(trans) ((1 << 1) << ((trans) * 4))
#define AUDIO_ELD_VALID(trans) ((1 << 0) << ((trans) * 4))
+#define HSW_AUD_CHICKENBIT 0x65f10
+#define SKL_AUD_CODEC_WAKE_SIGNAL (1 << 15)
+
/* HSW Power Wells */
#define HSW_PWR_WELL_BIOS 0x45400 /* CTL1 */
#define HSW_PWR_WELL_DRIVER 0x45404 /* CTL2 */
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index f72e93a..ceb2328 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -474,6 +474,32 @@ static void i915_audio_component_put_power(struct device *dev)
intel_display_power_put(dev_to_i915(dev), POWER_DOMAIN_AUDIO);
}
+static void i915_audio_component_codec_wake_override(struct device *dev,
+ bool enable)
+{
+ struct drm_i915_private *dev_priv = dev_to_i915(dev);
+ u32 tmp;
+
+ if (!IS_SKYLAKE(dev_priv))
+ return;
+
+ /*
+ * Enable/disable generating the codec wake signal, overriding the
+ * internal logic to generate the codec wake to controller.
+ */
+ tmp = I915_READ(HSW_AUD_CHICKENBIT);
+ tmp &= ~SKL_AUD_CODEC_WAKE_SIGNAL;
+ I915_WRITE(HSW_AUD_CHICKENBIT, tmp);
+ usleep_range(1000, 1500);
+
+ if (enable) {
+ tmp = I915_READ(HSW_AUD_CHICKENBIT);
+ tmp |= SKL_AUD_CODEC_WAKE_SIGNAL;
+ I915_WRITE(HSW_AUD_CHICKENBIT, tmp);
+ usleep_range(1000, 1500);
+ }
+}
+
/* Get CDCLK in kHz */
static int i915_audio_component_get_cdclk_freq(struct device *dev)
{
@@ -495,6 +521,7 @@ static const struct i915_audio_component_ops i915_audio_component_ops = {
.owner = THIS_MODULE,
.get_power = i915_audio_component_get_power,
.put_power = i915_audio_component_put_power,
+ .codec_wake_override = i915_audio_component_codec_wake_override,
.get_cdclk_freq = i915_audio_component_get_cdclk_freq,
};
diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h
index 3e2f22e..c9a8b64 100644
--- a/include/drm/i915_component.h
+++ b/include/drm/i915_component.h
@@ -31,6 +31,7 @@ struct i915_audio_component {
struct module *owner;
void (*get_power)(struct device *);
void (*put_power)(struct device *);
+ void (*codec_wake_override)(struct device *, bool enable);
int (*get_cdclk_freq)(struct device *);
} *ops;
};
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2015-04-29 9:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-29 9:49 han.lu [this message]
2015-04-29 9:49 ` [PATCH-V3 2/2] ALSA:hda - reset display codec when power on han.lu
2015-04-30 18:29 ` shuang.he
2015-04-30 14:21 ` [PATCH-V3 1/2] drm/i915/audio: add codec wakeup override enabled/disable callback Takashi Iwai
2015-05-04 0:32 ` Lu, Han
2015-05-04 7:49 ` Jani Nikula
2015-05-04 7:51 ` Yang, Libin
2015-05-04 12:28 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430300966-19331-1-git-send-email-han.lu@intel.com \
--to=han.lu@intel.com \
--cc=daniel.vetter@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=libin.yang@intel.com \
--cc=mengdong.lin@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox