public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Ander Conselvan De Oliveira <conselvan2@gmail.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 2/9] drm/i915: Send GCP infoframes for deep color HDMI sinks
Date: Mon, 25 May 2015 16:09:57 +0300	[thread overview]
Message-ID: <1432559397.3590.9.camel@gmail.com> (raw)
In-Reply-To: <20150525124454.GE18908@intel.com>

On Mon, 2015-05-25 at 15:44 +0300, Ville Syrjälä wrote:
> On Mon, May 25, 2015 at 03:32:52PM +0300, Ander Conselvan De Oliveira wrote:
> > On Tue, 2015-05-05 at 17:06 +0300, ville.syrjala@linux.intel.com wrote:
> > > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > 
> > > GCP infoframes are required to inform the HDMI sink about the color
> > > depth.
> > > 
> > > Send the GCP infoframe whenever the sink supports any deep color modes
> > > since such sinks must anyway be capable of receiving them. For sinks
> > > that don't support deep color let's skip the GCP in case it might
> > > confuse the sink, although HDMI 1.4 spec does say all sinks must be
> > > capable of reciving them. In theory we could skip the GCP infoframe
> > > for deep color sinks in 8bpc mode as well since sinks must fall back to
> > > 8bpc whenever GCP isn't received for some time.
> > > 
> > > BSpec says we should disable GCP after disabling the port, so do that as
> > > well.
> > > 
> > > v2: s/intel_set_gcp_infoframe/intel_hdmi_set_gcp_infoframe/
> > >     Rebased due to crtc->config changes
> > > 
> > > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/i915_reg.h   |  3 ++
> > >  drivers/gpu/drm/i915/intel_hdmi.c | 74 +++++++++++++++++++++++++++++++++++++++
> > >  2 files changed, 77 insertions(+)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > > index e619e41..dcd93b5 100644
> > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > @@ -6010,6 +6010,9 @@ enum skl_disp_power_wells {
> > >  #define _VIDEO_DIP_CTL_A         0xe0200
> > >  #define _VIDEO_DIP_DATA_A        0xe0208
> > >  #define _VIDEO_DIP_GCP_A         0xe0210
> > > +#define  GCP_COLOR_INDICATION		(1 << 2)
> > > +#define  GCP_DEFAULT_PHASE_ENABLE	(1 << 1)
> > > +#define  GCP_AV_MUTE			(1 << 0)
> > >  
> > >  #define _VIDEO_DIP_CTL_B         0xe1200
> > >  #define _VIDEO_DIP_DATA_B        0xe1208
> > > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> > > index 79cf445..87c4905 100644
> > > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > > @@ -541,6 +541,66 @@ static void g4x_set_infoframes(struct drm_encoder *encoder,
> > >  	intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode);
> > >  }
> > >  
> > > +static bool hdmi_sink_is_deep_color(struct drm_encoder *encoder)
> > > +{
> > > +	struct drm_device *dev = encoder->dev;
> > > +	struct drm_connector *connector;
> > > +
> > > +	WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
> > > +
> > > +	/*
> > > +	 * HDMI cloning is only supported on g4x which doesn't
> > > +	 * support deep color or GCP infoframes anyway so no
> > > +	 * need to worry about multiple HDMI sinks here.
> > > +	 */
> > > +	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
> > > +		if (connector->encoder == encoder)
> > > +			return connector->display_info.bpc > 8;
> > > +
> > > +	return false;
> > > +}
> > > +
> > > +static bool intel_hdmi_set_gcp_infoframe(struct drm_encoder *encoder)
> > > +{
> > > +	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
> > > +	struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
> > > +	u32 reg, val = 0;
> > > +
> > > +	if (HAS_DDI(dev_priv))
> > > +		reg = HSW_TVIDEO_DIP_GCP(crtc->config->cpu_transcoder);
> > > +	else if (IS_VALLEYVIEW(dev_priv))
> > > +		reg = VLV_TVIDEO_DIP_GCP(crtc->pipe);
> > > +	else if (HAS_PCH_SPLIT(dev_priv->dev))
> > > +		reg = TVIDEO_DIP_GCP(crtc->pipe);
> > > +	else
> > > +		return false;
> > > +
> > > +	/* Indicate color depth wheneven the sink supports deep color */
> > > +	if (hdmi_sink_is_deep_color(encoder))
> > > +		val |= GCP_COLOR_INDICATION;
> > > +
> > > +	I915_WRITE(reg, val);
> > > +
> > > +	return val != 0;
> > > +}
> > > +
> > > +static void intel_disable_gcp_infoframe(struct intel_crtc *crtc)
> > > +{
> > > +	struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
> > > +	u32 reg;
> > > +
> > > +	if (HAS_DDI(dev_priv))
> > > +		reg = HSW_TVIDEO_DIP_CTL(crtc->config->cpu_transcoder);
> > > +	else if (IS_VALLEYVIEW(dev_priv))
> > > +		reg = VLV_TVIDEO_DIP_CTL(crtc->pipe);
> > > +	else if (HAS_PCH_SPLIT(dev_priv->dev))
> > > +		reg = TVIDEO_DIP_CTL(crtc->pipe);
> > > +	else
> > > +		return;
> > > +
> > > +	I915_WRITE(reg, I915_READ(reg) & ~VIDEO_DIP_ENABLE_GCP);
> > > +}
> > > +
> > >  static void ibx_set_infoframes(struct drm_encoder *encoder,
> > >  			       bool enable,
> > >  			       struct drm_display_mode *adjusted_mode)
> > > @@ -581,6 +641,9 @@ static void ibx_set_infoframes(struct drm_encoder *encoder,
> > >  	val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
> > >  		 VIDEO_DIP_ENABLE_GCP);
> > >  
> > > +	if (intel_hdmi_set_gcp_infoframe(encoder))
> > > +		val |= VIDEO_DIP_ENABLE_GCP;
> > > +
> > >  	I915_WRITE(reg, val);
> > >  	POSTING_READ(reg);
> > >  
> > > @@ -618,6 +681,9 @@ static void cpt_set_infoframes(struct drm_encoder *encoder,
> > >  	val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
> > >  		 VIDEO_DIP_ENABLE_GCP);
> > >  
> > > +	if (intel_hdmi_set_gcp_infoframe(encoder))
> > > +		val |= VIDEO_DIP_ENABLE_GCP;
> > > +
> > >  	I915_WRITE(reg, val);
> > >  	POSTING_READ(reg);
> > >  
> > > @@ -666,6 +732,9 @@ static void vlv_set_infoframes(struct drm_encoder *encoder,
> > >  	val &= ~(VIDEO_DIP_ENABLE_AVI | VIDEO_DIP_ENABLE_VENDOR |
> > >  		 VIDEO_DIP_ENABLE_GAMUT | VIDEO_DIP_ENABLE_GCP);
> > >  
> > > +	if (intel_hdmi_set_gcp_infoframe(encoder))
> > > +		val |= VIDEO_DIP_ENABLE_GCP;
> > > +
> > >  	I915_WRITE(reg, val);
> > >  	POSTING_READ(reg);
> > >  
> > > @@ -695,6 +764,9 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
> > >  	val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_GCP_HSW |
> > >  		 VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW);
> > >  
> > > +	if (intel_hdmi_set_gcp_infoframe(encoder))
> > > +		val |= VIDEO_DIP_ENABLE_GCP_HSW;
> > > +
> > >  	I915_WRITE(reg, val);
> > >  	POSTING_READ(reg);
> > >  
> > > @@ -986,6 +1058,8 @@ static void intel_disable_hdmi(struct intel_encoder *encoder)
> > >  
> > >  	if (IS_CHERRYVIEW(dev))
> > >  		chv_powergate_phy_lanes(encoder, 0xf);
> > > +
> > > +	intel_disable_gcp_infoframe(to_intel_crtc(encoder->base.crtc));
> > 
> > BSpec says this should be disabled after disabling TRANS_DDI_FUNC_CTL,
> > so shouldn't this go in post_disable?
> 
> intel_disable_hdmi() isn't used on DDI platforms. I've not looked at the
> DDI code too much, but I expect it could have similar issues with the
> disable sequence like the earlier PCH platforms had.

Ah, right. So if the GCP would be disabled that would only be done in
->set_infoframes() called from ->pre_enable(), that is called while
TRANS_DDI_FUNC_CTL is disabled. So no issue there.

Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>



_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-05-25 13:10 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-05 14:06 [PATCH 0/9] drm/i915: HDMI 12bpc fixes ville.syrjala
2015-05-05 14:06 ` [PATCH v2 1/9] drm/i915: Implement WaEnableHDMI8bpcBefore12bpc:snb, ivb ville.syrjala
2015-05-05 14:24   ` Jani Nikula
2015-05-25 11:39   ` Ander Conselvan De Oliveira
2015-06-01 21:49   ` Konduru, Chandra
2015-05-05 14:06 ` [PATCH v2 2/9] drm/i915: Send GCP infoframes for deep color HDMI sinks ville.syrjala
2015-05-25 12:32   ` Ander Conselvan De Oliveira
2015-05-25 12:44     ` Ville Syrjälä
2015-05-25 13:09       ` Ander Conselvan De Oliveira [this message]
2015-05-25 13:14         ` Ville Syrjälä
2015-06-01 21:49   ` Konduru, Chandra
2015-06-02 12:58     ` Ville Syrjälä
2015-06-02 19:07       ` Konduru, Chandra
2015-05-05 14:06 ` [PATCH v2 3/9] drm/i915: Enable default_phase in GCP when possible ville.syrjala
2015-06-01 21:49   ` Konduru, Chandra
2015-06-02 11:46     ` Ville Syrjälä
2015-06-02 18:21       ` Konduru, Chandra
2015-06-03  9:34         ` Ville Syrjälä
2015-06-03 20:38           ` Konduru, Chandra
2015-05-05 14:06 ` [PATCH v2 4/9] drm/i915: Fix HDMI 12bpc TRANSCONF bpc value ville.syrjala
2015-06-01 21:48   ` Konduru, Chandra
2015-05-05 14:06 ` [PATCH v2 5/9] drm/i915: Fix 12bpc HDMI enable for IBX ville.syrjala
2015-06-03 20:52   ` Konduru, Chandra
2015-05-05 14:06 ` [PATCH v2 6/9] drm/i915: Disable all infoframes when turning off the HDMI port ville.syrjala
2015-06-01 22:48   ` Konduru, Chandra
2015-06-02 11:11     ` Ville Syrjälä
2015-06-02 18:18       ` Konduru, Chandra
2015-06-03  9:21         ` Ville Syrjälä
2015-06-03 23:24           ` Konduru, Chandra
2015-05-05 14:06 ` [PATCH 7/9] drm/i915: Check infoframe state more diligently ville.syrjala
2015-06-01 22:57   ` Konduru, Chandra
2015-05-05 14:06 ` [PATCH 8/9] drm/i915: Fix hdmi clock readout with pixel repeat ville.syrjala
2015-06-01 22:59   ` Konduru, Chandra
2015-05-05 14:06 ` [PATCH 9/9] drm/i915: Double the port clock when using double clocked modes with 12bpc ville.syrjala
2015-05-21 11:20   ` Ville Syrjälä
2015-06-01 23:23   ` Konduru, Chandra
2015-06-01 19:04 ` [PATCH 0/9] drm/i915: HDMI 12bpc fixes Konduru, Chandra
2015-06-15  9:37   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432559397.3590.9.camel@gmail.com \
    --to=conselvan2@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox