[PATCH v2] drm/i915/hsw: Fix workaround for server AUX channel clock divisor

[jim.bride@linux.intel.com]

From: Jim Bride <jim.bride@linux.intel.com>

According to the HSW b-spec we need to try clock divisors of 63
and 72, each 3 or more times, when attempting DP AUX channel
communication on a server chipset.  This actually wasn't happening
due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit
in status rather than checking that the operation was done and
that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set.

[v2] Implemented alternate solution suggested by Jani Nikula.

Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 0edc305..7d1e024 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -893,10 +893,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 				continue;
 			}
 			if (status & DP_AUX_CH_CTL_DONE)
-				break;
+				goto done;
 		}
-		if (status & DP_AUX_CH_CTL_DONE)
-			break;
 	}
 
 	if ((status & DP_AUX_CH_CTL_DONE) == 0) {
@@ -905,6 +903,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 		goto out;
 	}
 
+done:
 	/* Check for timeout or receive error.
 	 * Timeouts occur when the sink is not connected
 	 */
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx