[PATCH 03/13] drm/i915: Make the force_thru workaround atomic.

[Maarten Lankhorst <maarten.lankhorst@linux.intel.com>]

Set active_changed to force a modeset if the panel fitter's force
enabled.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c  | 82 +++++++++++-------------------------
 drivers/gpu/drm/i915/intel_display.c |  3 ++
 2 files changed, 27 insertions(+), 58 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index bc817da9fef7..5671a6c55e7f 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3643,74 +3643,40 @@ static int ilk_pipe_crc_ctl_reg(enum intel_pipe_crc_source *source,
 	return 0;
 }
 
-static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
+static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev, bool enable)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *crtc =
 		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_A]);
 	struct intel_crtc_state *pipe_config;
+	struct drm_atomic_state *state;
+	int ret = 0;
 
 	drm_modeset_lock_all(dev);
-	pipe_config = to_intel_crtc_state(crtc->base.state);
-
-	/*
-	 * If we use the eDP transcoder we need to make sure that we don't
-	 * bypass the pfit, since otherwise the pipe CRC source won't work. Only
-	 * relevant on hsw with pipe A when using the always-on power well
-	 * routing.
-	 */
-	if (pipe_config->cpu_transcoder == TRANSCODER_EDP &&
-	    !pipe_config->pch_pfit.enabled) {
-		bool active = pipe_config->base.active;
-
-		if (active) {
-			intel_crtc_control(&crtc->base, false);
-			pipe_config = to_intel_crtc_state(crtc->base.state);
-		}
-
-		pipe_config->pch_pfit.force_thru = true;
-
-		intel_display_power_get(dev_priv,
-					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
-
-		if (active)
-			intel_crtc_control(&crtc->base, true);
+	state = drm_atomic_state_alloc(dev);
+	if (!state) {
+		ret = -ENOMEM;
+		goto out;
 	}
-	drm_modeset_unlock_all(dev);
-}
 
-static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *crtc =
-		to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_A]);
-	struct intel_crtc_state *pipe_config;
-
-	drm_modeset_lock_all(dev);
-	/*
-	 * If we use the eDP transcoder we need to make sure that we don't
-	 * bypass the pfit, since otherwise the pipe CRC source won't work. Only
-	 * relevant on hsw with pipe A when using the always-on power well
-	 * routing.
-	 */
-	pipe_config = to_intel_crtc_state(crtc->base.state);
-	if (pipe_config->pch_pfit.force_thru) {
-		bool active = pipe_config->base.active;
-
-		if (active) {
-			intel_crtc_control(&crtc->base, false);
-			pipe_config = to_intel_crtc_state(crtc->base.state);
-		}
-
-		pipe_config->pch_pfit.force_thru = false;
+	state->acquire_ctx = drm_modeset_legacy_acquire_ctx(&crtc->base);
+	pipe_config = intel_atomic_get_crtc_state(state, crtc);
+	if (IS_ERR(pipe_config)) {
+		ret = PTR_ERR(pipe_config);
+		goto out;
+	}
 
-		intel_display_power_put(dev_priv,
-					POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
+	pipe_config->pch_pfit.force_thru = enable;
+	if (pipe_config->cpu_transcoder == TRANSCODER_EDP &&
+	    pipe_config->pch_pfit.enabled != enable)
+		pipe_config->base.active_changed = true;
 
-		if (active)
-			intel_crtc_control(&crtc->base, true);
-	}
+	ret = drm_atomic_commit(state);
+out:
 	drm_modeset_unlock_all(dev);
+	WARN(ret, "Toggling workaround to %i returns %i\n", enable, ret);
+	if (ret)
+		drm_atomic_state_free(state);
 }
 
 static int ivb_pipe_crc_ctl_reg(struct drm_device *dev,
@@ -3730,7 +3696,7 @@ static int ivb_pipe_crc_ctl_reg(struct drm_device *dev,
 		break;
 	case INTEL_PIPE_CRC_SOURCE_PF:
 		if (IS_HASWELL(dev) && pipe == PIPE_A)
-			hsw_trans_edp_pipe_A_crc_wa(dev);
+			hsw_trans_edp_pipe_A_crc_wa(dev, true);
 
 		*val = PIPE_CRC_ENABLE | PIPE_CRC_SOURCE_PF_IVB;
 		break;
@@ -3842,7 +3808,7 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
 		else if (IS_VALLEYVIEW(dev))
 			vlv_undo_pipe_scramble_reset(dev, pipe);
 		else if (IS_HASWELL(dev) && pipe == PIPE_A)
-			hsw_undo_trans_edp_pipe_A_crc_wa(dev);
+			hsw_trans_edp_pipe_A_crc_wa(dev, false);
 
 		hsw_enable_ips(crtc);
 	}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index ede652867596..e56806f23199 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12158,6 +12158,7 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
 	struct intel_dpll_hw_state dpll_hw_state;
 	enum intel_dpll_id shared_dpll;
 	uint32_t ddi_pll_sel;
+	bool force_thru;
 
 	/* FIXME: before the switch to atomic started, a new pipe_config was
 	 * kzalloc'd. Code that depends on any field being zero should be
@@ -12169,6 +12170,7 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
 	shared_dpll = crtc_state->shared_dpll;
 	dpll_hw_state = crtc_state->dpll_hw_state;
 	ddi_pll_sel = crtc_state->ddi_pll_sel;
+	force_thru = crtc_state->pch_pfit.force_thru;
 
 	memset(crtc_state, 0, sizeof *crtc_state);
 
@@ -12177,6 +12179,7 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
 	crtc_state->shared_dpll = shared_dpll;
 	crtc_state->dpll_hw_state = dpll_hw_state;
 	crtc_state->ddi_pll_sel = ddi_pll_sel;
+	crtc_state->pch_pfit.force_thru = force_thru;
 }
 
 static int
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx