From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 1/3] drm/i915: combine i9xx_get_hpd_pins and pch_get_hpd_pins
Date: Mon, 20 Jul 2015 14:43:37 -0700 [thread overview]
Message-ID: <1437428619-30160-2-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1437428619-30160-1-git-send-email-imre.deak@intel.com>
These functions are quite similar, so combine them with the use of a new
argument for a function that detects long pulses. This will be also
needed by an upcoming patch adding support for BXT long pulse detection.
No functional change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/i915_irq.c | 54 ++++++++++++++---------------------------
1 file changed, 18 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index a6fbe64..306de78 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1256,9 +1256,10 @@ static bool i9xx_port_hotplug_long_detect(enum port port, u32 val)
}
/* Get a bit mask of pins that have triggered, and which ones may be long. */
-static void pch_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
+static void intel_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
u32 hotplug_trigger, u32 dig_hotplug_reg,
- const u32 hpd[HPD_NUM_PINS])
+ const u32 hpd[HPD_NUM_PINS],
+ bool long_pulse_detect(enum port port, u32 val))
{
enum port port;
int i;
@@ -1276,7 +1277,7 @@ static void pch_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
*pin_mask |= BIT(i);
port = intel_hpd_pin_to_port(i);
- if (pch_port_hotplug_long_detect(port, dig_hotplug_reg))
+ if (long_pulse_detect(port, dig_hotplug_reg))
*long_mask |= BIT(i);
}
@@ -1285,34 +1286,6 @@ static void pch_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
}
-/* Get a bit mask of pins that have triggered, and which ones may be long. */
-static void i9xx_get_hpd_pins(u32 *pin_mask, u32 *long_mask,
- u32 hotplug_trigger, const u32 hpd[HPD_NUM_PINS])
-{
- enum port port;
- int i;
-
- *pin_mask = 0;
- *long_mask = 0;
-
- if (!hotplug_trigger)
- return;
-
- for_each_hpd_pin(i) {
- if ((hpd[i] & hotplug_trigger) == 0)
- continue;
-
- *pin_mask |= BIT(i);
-
- port = intel_hpd_pin_to_port(i);
- if (i9xx_port_hotplug_long_detect(port, hotplug_trigger))
- *long_mask |= BIT(i);
- }
-
- DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x, pins 0x%08x\n",
- hotplug_trigger, *pin_mask);
-}
-
static void gmbus_irq_handler(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -1550,7 +1523,9 @@ static void i9xx_hpd_irq_handler(struct drm_device *dev)
if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_G4X;
- i9xx_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, hpd_status_g4x);
+ intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
+ hotplug_trigger, hpd_status_g4x,
+ i9xx_port_hotplug_long_detect);
intel_hpd_irq_handler(dev, pin_mask, long_mask);
if (hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X)
@@ -1558,7 +1533,9 @@ static void i9xx_hpd_irq_handler(struct drm_device *dev)
} else {
u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
- i9xx_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, hpd_status_i915);
+ intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
+ hotplug_trigger, hpd_status_g4x,
+ i9xx_port_hotplug_long_detect);
intel_hpd_irq_handler(dev, pin_mask, long_mask);
}
}
@@ -1664,7 +1641,9 @@ static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
- pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, dig_hotplug_reg, hpd_ibx);
+ intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
+ dig_hotplug_reg, hpd_ibx,
+ pch_port_hotplug_long_detect);
intel_hpd_irq_handler(dev, pin_mask, long_mask);
if (pch_iir & SDE_AUDIO_POWER_MASK) {
@@ -1763,7 +1742,9 @@ static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG);
I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg);
- pch_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, dig_hotplug_reg, hpd_cpt);
+ intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger,
+ dig_hotplug_reg, hpd_cpt,
+ pch_port_hotplug_long_detect);
intel_hpd_irq_handler(dev, pin_mask, long_mask);
if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) {
@@ -1979,7 +1960,8 @@ static void bxt_hpd_handler(struct drm_device *dev, uint32_t iir_status)
/* Clear sticky bits in hpd status */
I915_WRITE(BXT_HOTPLUG_CTL, hp_control);
- pch_get_hpd_pins(&pin_mask, &long_mask, hp_trigger, hp_control, hpd_bxt);
+ intel_get_hpd_pins(&pin_mask, &long_mask, hp_trigger, hp_control,
+ hpd_bxt, pch_port_hotplug_long_detect);
intel_hpd_irq_handler(dev, pin_mask, long_mask);
}
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-07-20 21:43 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-20 21:43 [PATCH 0/3] drm/i915/bxt: HPD long/short pulse detect support on port A Imre Deak
2015-07-20 21:43 ` Imre Deak [this message]
2015-07-21 8:20 ` [PATCH 1/3] drm/i915: combine i9xx_get_hpd_pins and pch_get_hpd_pins Sivakumar Thulasimani
2015-07-21 17:58 ` Imre Deak
2015-07-22 8:13 ` Sivakumar Thulasimani
2015-07-21 22:32 ` [PATCH v2 " Imre Deak
2015-07-22 8:16 ` Sivakumar Thulasimani
2015-07-20 21:43 ` [PATCH 2/3] drm/i915: don't use HPD_PORT_A as an alias for HPD_NONE Imre Deak
2015-07-21 8:21 ` Sivakumar Thulasimani
2015-07-21 18:03 ` Imre Deak
2015-07-21 22:32 ` [PATCH v2 " Imre Deak
2015-07-22 8:28 ` Sivakumar Thulasimani
2015-07-20 21:43 ` [PATCH 3/3] drm/i915/bxt: add support for HPD long/short pulse detection on HPD_PORT_A pin Imre Deak
2015-07-22 8:31 ` Sivakumar Thulasimani
2015-07-21 6:10 ` [PATCH 0/3] drm/i915/bxt: HPD long/short pulse detect support on port A Jindal, Sonika
2015-07-21 17:42 ` Imre Deak
2015-07-22 8:45 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437428619-30160-2-git-send-email-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox