From: Arun Siluvery <arun.siluvery@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Subject: [PATCH v1 2/2] drm/i915:gen9: Add disable gather at set shader w/a
Date: Mon, 3 Aug 2015 20:24:57 +0100 [thread overview]
Message-ID: <1438629897-2993-3-git-send-email-arun.siluvery@linux.intel.com> (raw)
In-Reply-To: <1438629897-2993-1-git-send-email-arun.siluvery@linux.intel.com>
This WA is implemented in init_context as well as WA batch init.
There are also some dependent bits need to be set in other registers
for this to be complete.
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 3 +++
drivers/gpu/drm/i915/intel_lrc.c | 8 ++++++++
drivers/gpu/drm/i915/intel_ringbuffer.c | 16 ++++++++++++++++
3 files changed, 27 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8991cd5..24b8bb9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1720,7 +1720,9 @@ enum skl_disp_power_wells {
#define MEM_DISPLAY_A_TRICKLE_FEED_DISABLE (1<<2) /* 830/845 only */
#define MEM_DISPLAY_TRICKLE_FEED_DISABLE (1<<2) /* 85x only */
#define FW_BLC 0x020d8
+#define GEN9_DISABLE_GATHER_AT_SET_SHADER (1<<7)
#define FW_BLC2 0x020dc
+#define GEN9_RS_CHICKEN_DISABLE_GATHER_AT_SHADER (1<<2)
#define FW_BLC_SELF 0x020e0 /* 915+ only */
#define FW_BLC_SELF_EN_MASK (1<<31)
#define FW_BLC_SELF_FIFO_MASK (1<<16) /* 945 only */
@@ -5836,6 +5838,7 @@ enum skl_disp_power_wells {
# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26))
# define GEN9_RHWO_OPTIMIZATION_DISABLE (1<<14)
#define COMMON_SLICE_CHICKEN2 0x7014
+#define GEN9_DISABLE_GATHER_SET_SHADER_SLICE (1<<12)
# define GEN8_CSC2_SBE_VUE_CACHE_CONSERVATIVE (1<<0)
#define HIZ_CHICKEN 0x7018
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 9faad82..d3a03f3 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -1292,6 +1292,14 @@ static int gen9_init_perctx_bb(struct intel_engine_cs *ring,
struct drm_device *dev = ring->dev;
uint32_t index = wa_ctx_start(wa_ctx, *offset, CACHELINE_DWORDS);
+ /* WA to reset "disable gather at set shader slice" bit */
+ if (IS_SKYLAKE(dev)) {
+ wa_ctx_emit(batch, index, MI_LOAD_REGISTER_IMM(1));
+ wa_ctx_emit(batch, index, COMMON_SLICE_CHICKEN2);
+ wa_ctx_emit(batch, index,
+ _MASKED_BIT_DISABLE(GEN9_DISABLE_GATHER_SET_SHADER_SLICE));
+ }
+
/* WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken:skl,bxt */
if ((IS_SKYLAKE(dev) && (INTEL_REVID(dev) <= SKL_REVID_B0)) ||
(IS_BROXTON(dev) && (INTEL_REVID(dev) == BXT_REVID_A0))) {
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index dcd1b8f..4fc4b5e 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -985,6 +985,15 @@ static int gen9_init_workarounds(struct intel_engine_cs *ring)
tmp |= HDC_FORCE_CSR_NON_COHERENT_OVR_DISABLE;
WA_SET_BIT_MASKED(HDC_CHICKEN0, tmp);
+ /* WA to gather at set shader - skl,bxt
+ * These are dependent bits need to be set for the WA.
+ */
+ if (IS_SKYLAKE(dev) && (INTEL_REVID(dev) > SKL_REVID_D0) ||
+ (IS_BROXTON(dev) && INTEL_REVID(dev) > BXT_REVID_A0)) {
+ WA_SET_BIT_MASKED(FW_BLC, GEN9_DISABLE_GATHER_AT_SET_SHADER);
+ WA_SET_BIT_MASKED(FW_BLC2, GEN9_RS_CHICKEN_DISABLE_GATHER_AT_SHADER);
+ }
+
return 0;
}
@@ -1068,6 +1077,13 @@ static int skl_init_workarounds(struct intel_engine_cs *ring)
HDC_FENCE_DEST_SLM_DISABLE |
HDC_BARRIER_PERFORMANCE_DISABLE);
+ /* WA to Disable gather at set shader - skl
+ * This bit needs to be reset in Per ctx WA batch and it is also
+ * dependent on other bits in different register, all of them need
+ * be set for the WA to be complete.
+ */
+ WA_SET_BIT_MASKED(COMMON_SLICE_CHICKEN2, GEN9_DISABLE_GATHER_SET_SHADER_SLICE);
+
return skl_tune_iz_hashing(ring);
}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-08-03 19:25 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-03 19:24 [PATCH v1 0/2] Add SKL Workarounds Arun Siluvery
2015-08-03 19:24 ` [PATCH v1 1/2] drm/i915:skl: Add WaEnableGapsTsvCreditFix Arun Siluvery
2015-08-03 23:01 ` Ben Widawsky
2015-08-04 8:58 ` Mika Kuoppala
2015-08-04 9:01 ` Siluvery, Arun
2015-08-05 9:17 ` Daniel Vetter
2015-08-05 13:36 ` Joonas Lahtinen
2015-08-03 19:24 ` Arun Siluvery [this message]
2015-08-03 23:21 ` [PATCH v1 2/2] drm/i915:gen9: Add disable gather at set shader w/a Ben Widawsky
2015-08-04 9:29 ` Siluvery, Arun
2015-08-04 10:21 ` [PATCH v2 " Arun Siluvery
2015-08-04 21:06 ` Ben Widawsky
2015-08-05 14:45 ` Mika Kuoppala
2015-08-05 15:18 ` Siluvery, Arun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438629897-2993-3-git-send-email-arun.siluvery@linux.intel.com \
--to=arun.siluvery@linux.intel.com \
--cc=benjamin.widawsky@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox