public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Vivi, Rodrigo" <rodrigo.vivi@intel.com>
To: "daniel@ffwll.ch" <daniel@ffwll.ch>
Cc: "intel-gfx@lists.freedesktop.org" <intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH 1/6] drm/i915/skl: Enable DDI-E
Date: Thu, 6 Aug 2015 15:37:18 +0000	[thread overview]
Message-ID: <1438875496.21935.5.camel@intel.com> (raw)
In-Reply-To: <20150806133011.GS17734@phenom.ffwll.local>

On Thu, 2015-08-06 at 15:30 +0200, Daniel Vetter wrote:
> On Thu, Aug 06, 2015 at 03:51:36PM +0800, Xiong Zhang wrote:
> > From: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > 
> > There are OEMs using DDI-E out there,
> > so let's enable it.
> > 
> > Unfortunately there is no detection bit for DDI-E
> > So we need to rely on VBT for that.
> > 
> > I also need to give credits to Xiong since before seing
> > his approach to check info->support_* I was creating an ugly
> > vbt->ddie_sfuse_strap in order to propagate the ddi presence info
> > 
> > Credits-to: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
> > Cc: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
> > Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> 
> Enable patches like these should be last in the series, since before all
> the other stuff things will simply be broken.

ops, my bad...
totally agree...
I will rebase locally here moving this up...

> -Daniel
> 
> > ---
> >  drivers/gpu/drm/i915/intel_bios.c    | 14 +++++++-------
> >  drivers/gpu/drm/i915/intel_bios.h    |  2 ++
> >  drivers/gpu/drm/i915/intel_display.c |  9 +++++++++
> >  3 files changed, 18 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> > index 2ff9eb0..55b5072 100644
> > --- a/drivers/gpu/drm/i915/intel_bios.c
> > +++ b/drivers/gpu/drm/i915/intel_bios.c
> > @@ -898,19 +898,19 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
> >  	/* Each DDI port can have more than one value on the "DVO Port" field,
> >  	 * so look for all the possible values for each port and abort if more
> >  	 * than one is found. */
> > -	int dvo_ports[][2] = {
> > -		{DVO_PORT_HDMIA, DVO_PORT_DPA},
> > -		{DVO_PORT_HDMIB, DVO_PORT_DPB},
> > -		{DVO_PORT_HDMIC, DVO_PORT_DPC},
> > -		{DVO_PORT_HDMID, DVO_PORT_DPD},
> > -		{DVO_PORT_CRT, -1 /* Port E can only be DVO_PORT_CRT */ },
> > +	int dvo_ports[][3] = {
> > +		{DVO_PORT_HDMIA, DVO_PORT_DPA, -1},
> > +		{DVO_PORT_HDMIB, DVO_PORT_DPB, -1},
> > +		{DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
> > +		{DVO_PORT_HDMID, DVO_PORT_DPD, -1},
> > +		{DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
> >  	};
> >  
> >  	/* Find the child device to use, abort if more than one found. */
> >  	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
> >  		it = dev_priv->vbt.child_dev + i;
> >  
> > -		for (j = 0; j < 2; j++) {
> > +		for (j = 0; j < 3; j++) {
> >  			if (dvo_ports[port][j] == -1)
> >  				break;
> >  
> > diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
> > index f7ad6a5..02255d8 100644
> > --- a/drivers/gpu/drm/i915/intel_bios.h
> > +++ b/drivers/gpu/drm/i915/intel_bios.h
> > @@ -764,6 +764,8 @@ int intel_parse_bios(struct drm_device *dev);
> >  #define DVO_PORT_DPC	8
> >  #define DVO_PORT_DPD	9
> >  #define DVO_PORT_DPA	10
> > +#define DVO_PORT_DPE	11
> > +#define DVO_PORT_HDMIE	12
> >  #define DVO_PORT_MIPIA	21
> >  #define DVO_PORT_MIPIB	22
> >  #define DVO_PORT_MIPIC	23
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index af0bcfe..aaa34b8 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -14123,6 +14123,15 @@ static void intel_setup_outputs(struct drm_device *dev)
> >  			intel_ddi_init(dev, PORT_C);
> >  		if (found & SFUSE_STRAP_DDID_DETECTED)
> >  			intel_ddi_init(dev, PORT_D);
> > +		/*
> > +		 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
> > +		 */
> > +		if (IS_SKYLAKE(dev) &&
> > +		    (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
> > +		     dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
> > +		     dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
> > +			intel_ddi_init(dev, PORT_E);
> > +
> >  	} else if (HAS_PCH_SPLIT(dev)) {
> >  		int found;
> >  		dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
> > -- 
> > 2.1.4
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-08-06 15:37 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-06  7:51 [PATCH 1/6] drm/i915/skl: Enable DDI-E Xiong Zhang
2015-08-06  7:51 ` [PATCH 2/6] drm/i915: Set power domain for DDI-E Xiong Zhang
2015-08-11  6:12   ` Zhang, Xiong Y
2015-08-06  7:51 ` [PATCH 3/6] drm/i915: Set alternate aux " Xiong Zhang
2015-08-08  0:01   ` [PATCH] " Rodrigo Vivi
2015-08-11  6:18     ` Zhang, Xiong Y
2015-08-13  8:40     ` shuang.he
2015-08-06  7:51 ` [PATCH 4/6] drm/i915: eDP can be present on DDI-E Xiong Zhang
2015-08-11  6:27   ` Zhang, Xiong Y
2015-08-11  9:47   ` Daniel Vetter
2015-08-11 10:09     ` Zhang, Xiong Y
2015-08-11 18:42     ` Vivi, Rodrigo
2015-08-12 10:27       ` Zhang, Xiong Y
2015-08-12 12:32         ` Daniel Vetter
2015-08-12 16:38           ` Vivi, Rodrigo
2015-08-31 15:47   ` Jani Nikula
2015-08-06  7:51 ` [PATCH 5/6] drm/i915/skl: enable DDIE hotplug Xiong Zhang
2015-08-08  0:06   ` Rodrigo Vivi
2015-08-10  6:53     ` [PATCH 5/6 v2] drm/i915/skl: enable DDI-E hotplug Xiong Zhang
2015-08-17  7:55       ` [PATCH 5/6 v3] " Xiong Zhang
2015-08-26  7:25         ` Jani Nikula
2015-08-06  7:51 ` [PATCH 6/6] drm/i915: Enable HDMI on DDI-E Xiong Zhang
2015-08-08  0:09   ` Rodrigo Vivi
2015-08-11  9:58   ` Daniel Vetter
2015-08-12 10:39     ` [PATCH 6/6 v3] " Xiong Zhang
2015-08-12 12:33       ` Daniel Vetter
2015-08-13  2:57         ` Zhang, Xiong Y
2015-08-14  8:42           ` Daniel Vetter
2015-08-14 10:38             ` Zhang, Xiong Y
2015-08-17  8:04             ` Xiong Zhang
2015-08-31 15:47               ` Jani Nikula
2015-08-12 14:19   ` [PATCH 6/6] " shuang.he
2015-08-06 13:30 ` [PATCH 1/6] drm/i915/skl: Enable DDI-E Daniel Vetter
2015-08-06 15:37   ` Vivi, Rodrigo [this message]
2015-08-08  0:35   ` [PATCH 8/6] " Rodrigo Vivi
2015-08-11  7:12     ` Zhang, Xiong Y
2015-08-31 15:48     ` Jani Nikula
2015-08-06 15:14 ` [PATCH 1/6] " Daniel Vetter
2015-08-06 15:50   ` Vivi, Rodrigo
2015-08-08  0:33   ` [PATCH 7/6] drm/i915/skl: DDI-E and DDI-A shares 4 lanes Rodrigo Vivi
2015-08-11  7:05     ` Zhang, Xiong Y
2015-08-11 18:38       ` Vivi, Rodrigo
2015-08-12  2:20         ` Zhang, Xiong Y
2015-08-12 16:51           ` Vivi, Rodrigo
2015-08-13  3:27             ` Zhang, Xiong Y
2015-08-13  5:48               ` Jindal, Sonika
2015-08-26  8:15                 ` Jani Nikula
2015-08-26 16:38                   ` Vivi, Rodrigo
2015-08-27  2:52                     ` Zhang, Xiong Y
2015-08-27 14:31                       ` Timo Aaltonen
2015-08-27 17:59                         ` Vivi, Rodrigo
2015-08-12 21:29       ` Timo Aaltonen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1438875496.21935.5.camel@intel.com \
    --to=rodrigo.vivi@intel.com \
    --cc=daniel@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox