From: libin.yang@intel.com
To: alsa-devel@alsa-project.org, tiwai@suse.de,
intel-gfx@lists.freedesktop.org, daniel.vetter@ffwll.ch
Subject: [PATCH v2 2/4] drm/i915: implement set_ncts callback
Date: Mon, 10 Aug 2015 15:32:09 +0800 [thread overview]
Message-ID: <1439191931-25705-2-git-send-email-libin.yang@intel.com> (raw)
In-Reply-To: <1439191931-25705-1-git-send-email-libin.yang@intel.com>
From: Libin Yang <libin.yang@intel.com>
Display audio may not work at some frequencies
with the HW provided N/CTS.
This patch sets the proper N value for the
given audio sample rate at the impacted frequencies.
At other frequencies, it will use the N/CTS value
which HW provides.
Signed-off-by: Libin Yang <libin.yang@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 2 +
drivers/gpu/drm/i915/intel_audio.c | 95 ++++++++++++++++++++++++++++++++++++++
2 files changed, 97 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ea46d68..da2d128 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7014,6 +7014,8 @@ enum skl_disp_power_wells {
_HSW_AUD_MISC_CTRL_A, \
_HSW_AUD_MISC_CTRL_B)
+#define HSW_AUD_PIPE_CONN_SEL_CTRL 0x650ac
+
#define _HSW_AUD_DIP_ELD_CTRL_ST_A 0x650b4
#define _HSW_AUD_DIP_ELD_CTRL_ST_B 0x651b4
#define HSW_AUD_DIP_ELD_CTRL(pipe) _PIPE(pipe, \
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index dc32cf4..eddf37f 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -68,6 +68,30 @@ static const struct {
{ 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 },
};
+#define TMDS_297M 297000
+#define TMDS_296M DIV_ROUND_UP(297000 * 1000, 1001)
+static const struct {
+ int sample_rate;
+ int clock;
+ int n;
+ int cts;
+} aud_ncts[] = {
+ { 44100, TMDS_296M, 4459, 234375 },
+ { 44100, TMDS_297M, 4704, 247500 },
+ { 48000, TMDS_296M, 5824, 281250 },
+ { 48000, TMDS_297M, 5120, 247500 },
+ { 32000, TMDS_296M, 5824, 421875 },
+ { 32000, TMDS_297M, 3072, 222750 },
+ { 88200, TMDS_296M, 8918, 234375 },
+ { 88200, TMDS_297M, 9408, 247500 },
+ { 96000, TMDS_296M, 11648, 281250 },
+ { 96000, TMDS_297M, 10240, 247500 },
+ { 176400, TMDS_296M, 17836, 234375 },
+ { 176400, TMDS_297M, 18816, 247500 },
+ { 44100, TMDS_296M, 23296, 281250 },
+ { 44100, TMDS_297M, 20480, 247500 },
+};
+
/* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode)
{
@@ -514,12 +538,83 @@ static int i915_audio_component_get_cdclk_freq(struct device *dev)
return ret;
}
+static int i915_audio_component_set_ncts(struct device *dev, int port,
+ int dev_entry, int rate)
+{
+ struct drm_i915_private *dev_priv = dev_to_i915(dev);
+ struct drm_device *drm_dev = dev_priv->dev;
+ struct intel_encoder *intel_encoder;
+ struct intel_digital_port *intel_dig_port;
+ struct intel_crtc *crtc;
+ struct drm_display_mode *mode;
+ enum pipe pipe = -1;
+ u32 tmp;
+ int i;
+ int n_low, n_up, n = 0;
+
+ /* 1. get the pipe */
+ for_each_intel_encoder(drm_dev, intel_encoder) {
+ intel_dig_port = enc_to_dig_port(&intel_encoder->base);
+ if (port == intel_dig_port->port) {
+ crtc = to_intel_crtc(intel_encoder->base.crtc);
+ if (!crtc) {
+ DRM_DEBUG_KMS("%s: crtc is NULL\n", __func__);
+ continue;
+ }
+ pipe = crtc->pipe;
+ break;
+ }
+ }
+
+ if (pipe == -1) {
+ DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port));
+ return -ENODEV;
+ }
+ DRM_DEBUG_KMS("pipe %c connects port %c\n",
+ pipe_name(pipe), port_name(port));
+ mode = &crtc->config->base.adjusted_mode;
+
+ /* 2. Need set the N/CTS manually at some frequencies */
+ if ((mode->clock != TMDS_297M) &&
+ (mode->clock != TMDS_296M)) {
+ tmp = I915_READ(HSW_AUD_CFG(pipe));
+ tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
+ I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+ return 0;
+ }
+
+ /* 3. calculate the N/CTS */
+ for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
+ if ((rate == aud_ncts[i].sample_rate) &&
+ (mode->clock == aud_ncts[i].clock)) {
+ n = aud_ncts[i].n;
+ break;
+ }
+ }
+ if (n == 0)
+ return 0;
+ n_low = n & 0xfff;
+ n_up = (n >> 12) & 0xff;
+
+ /* 4. set the N/CTS */
+ tmp = I915_READ(HSW_AUD_CFG(pipe));
+ tmp |= AUD_CONFIG_N_PROG_ENABLE;
+ tmp &= ~AUD_CONFIG_UPPER_N_MASK;
+ tmp |= (n_up << AUD_CONFIG_UPPER_N_SHIFT);
+ tmp &= ~AUD_CONFIG_LOWER_N_MASK;
+ tmp |= (n_low << AUD_CONFIG_LOWER_N_SHIFT);
+ I915_WRITE(HSW_AUD_CFG(pipe), tmp);
+
+ return 0;
+}
+
static const struct i915_audio_component_ops i915_audio_component_ops = {
.owner = THIS_MODULE,
.get_power = i915_audio_component_get_power,
.put_power = i915_audio_component_put_power,
.codec_wake_override = i915_audio_component_codec_wake_override,
.get_cdclk_freq = i915_audio_component_get_cdclk_freq,
+ .set_ncts = i915_audio_component_set_ncts,
};
static int i915_audio_component_bind(struct device *i915_dev,
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-08-10 7:42 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-10 7:32 [PATCH v2 1/4] drm/i915: Add audio set_ncts callback libin.yang
2015-08-10 7:32 ` libin.yang [this message]
2015-08-10 12:00 ` [PATCH v2 2/4] drm/i915: implement " Jani Nikula
2015-08-11 2:49 ` Yang, Libin
2015-08-12 13:04 ` Daniel Vetter
2015-08-12 14:31 ` Yang, Libin
2015-08-10 12:16 ` Jani Nikula
2015-08-11 2:55 ` Yang, Libin
2015-08-12 13:06 ` Daniel Vetter
2015-08-12 14:36 ` Yang, Libin
2015-08-12 14:45 ` Jani Nikula
2015-08-12 14:48 ` Yang, Libin
2015-08-10 7:32 ` [PATCH v3 3/4] ALSA: hda - display audio call ncts callback libin.yang
2015-08-10 12:03 ` Jani Nikula
2015-08-11 2:51 ` Yang, Libin
2015-08-10 7:32 ` [PATCH v4 4/4] drm/i915: set proper N/CTS in modeset libin.yang
2015-08-10 8:04 ` Takashi Iwai
2015-08-10 8:30 ` Yang, Libin
2015-08-10 12:10 ` Jani Nikula
2015-08-11 3:10 ` Yang, Libin
2015-08-11 7:13 ` Jani Nikula
2015-08-11 7:46 ` Yang, Libin
2015-08-11 8:14 ` Jani Nikula
2015-08-12 2:41 ` Yang, Libin
2015-08-12 6:20 ` Jani Nikula
2015-08-12 7:28 ` Yang, Libin
2015-08-12 13:10 ` Daniel Vetter
2015-08-12 13:23 ` Jani Nikula
2015-08-12 13:43 ` Daniel Vetter
2015-08-12 14:18 ` Jani Nikula
2015-08-12 14:57 ` Yang, Libin
2015-08-10 11:46 ` [PATCH v2 1/4] drm/i915: Add audio set_ncts callback Jani Nikula
2015-08-11 2:40 ` Yang, Libin
2015-08-12 3:16 ` Yang, Libin
2015-08-12 6:14 ` [Intel-gfx] " Jani Nikula
2015-08-11 5:51 ` Yang, Libin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439191931-25705-2-git-send-email-libin.yang@intel.com \
--to=libin.yang@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox