public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Deepak M <m.deepak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [MIPI SEQ PARSING v2 PATCH 08/11] drm/i915: GPIO for CHT generic MIPI
Date: Thu, 10 Sep 2015 04:54:27 +0530	[thread overview]
Message-ID: <1441841070-11532-9-git-send-email-m.deepak@intel.com> (raw)
In-Reply-To: <1441841070-11532-1-git-send-email-m.deepak@intel.com>

From: Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>

The GPIO configuration and register offsets are different from
baytrail for cherrytrail. Port the gpio programming accordingly
for cherrytrail in this patch.

v2: Rebase

Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h            |   23 ++++++
 drivers/gpu/drm/i915/intel_dsi_panel_vbt.c |  117 +++++++++++++++++++++++-----
 2 files changed, 122 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5bef50c..c5bea41 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -568,11 +568,21 @@
 #define   IOSF_PORT_DPIO			0x12
 #define   IOSF_PORT_DPIO_2			0x1a
 #define   IOSF_PORT_GPIO_NC			0x13
+#define   CHV_IOSF_PORT_GPIO_N			0x13
 #define   IOSF_PORT_GPIO_SC			0x48
+#define   CHV_IOSF_PORT_GPIO_SE			0x48
+#define   CHV_IOSF_PORT_GPIO_SW			0xB2
 #define   IOSF_PORT_GPIO_SUS			0xA8
+#define   CHV_IOSF_PORT_GPIO_E			0xA8
 #define   MAX_GPIO_NUM_NC			26
 #define   MAX_GPIO_NUM_SC			128
 #define   MAX_GPIO_NUM				172
+#define   CHV_MAX_GPIO_NUM_N			72
+#define   CHV_MAX_GPIO_NUM_SE			99
+#define   CHV_MAX_GPIO_NUM_SW			197
+#define   CHV_MIN_GPIO_NUM_SE			73
+#define   CHV_MIN_GPIO_NUM_SW			100
+#define   CHV_MIN_GPIO_NUM_E			198
 #define   IOSF_PORT_CCK				0x14
 #define   IOSF_PORT_CCU				0xA9
 #define   IOSF_PORT_GPS_CORE			0x48
@@ -580,6 +590,19 @@
 #define VLV_IOSF_DATA				(VLV_DISPLAY_BASE + 0x2104)
 #define VLV_IOSF_ADDR				(VLV_DISPLAY_BASE + 0x2108)
 
+#define VLV_GPIO_CFG				0x2000CC00
+#define VLV_GPIO_INPUT_DIS			0x04
+
+#define CHV_PAD_FMLY_BASE			0x4400
+#define CHV_PAD_FMLY_SIZE			0x400
+#define CHV_PAD_CFG_0_1_REG_SIZE		0x8
+#define CHV_PAD_CFG_REG_SIZE			0x4
+#define CHV_VBT_MAX_PINS_PER_FMLY		15
+
+#define CHV_GPIO_CFG_UNLOCK			0x00000000
+#define CHV_GPIO_CFG_HiZ			0x00008100
+#define CHV_GPIO_CFG_TX_STATE_SHIFT		1
+
 /* See configdb bunit SB addr map */
 #define BUNIT_REG_BISOC				0x11
 
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index 1aa5b19..b0d09f6 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -418,17 +418,75 @@ static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data)
 
 	return data;
 }
-
-static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
+static int chv_program_gpio(struct intel_dsi *intel_dsi,
+				const u8 *data, const u8 **cur_data)
 {
+	struct drm_device *dev = intel_dsi->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	u8 gpio, action;
+	u16 family_num;
 	u16 function, pad;
-	u32 val;
 	u8 block;
+
+	/*
+	 * Skipping the first byte as it is of no
+	 * interest for linux kernel in new VBT version
+	 */
+	if (dev_priv->vbt.dsi.seq_version >= 3)
+		data++;
+
+	gpio = *data++;
+
+	/* pull up/down */
+	action = *data++;
+
+	if (dev_priv->vbt.dsi.seq_version >= 3) {
+		if (gpio <= CHV_MAX_GPIO_NUM_N) {
+			block = CHV_IOSF_PORT_GPIO_N;
+			DRM_DEBUG_DRIVER("GPIO is in the north Block\n");
+		} else if (gpio <= CHV_MAX_GPIO_NUM_SE) {
+			block = CHV_IOSF_PORT_GPIO_SE;
+			gpio = gpio - CHV_MIN_GPIO_NUM_SE;
+			DRM_DEBUG_DRIVER("GPIO is in the south east Block\n");
+		} else if (gpio <= CHV_MAX_GPIO_NUM_SW) {
+			block = CHV_IOSF_PORT_GPIO_SW;
+			gpio = gpio - CHV_MIN_GPIO_NUM_SW;
+			DRM_DEBUG_DRIVER("GPIO is in the south west Block\n");
+		} else {
+			block = CHV_IOSF_PORT_GPIO_E;
+			gpio = gpio - CHV_MIN_GPIO_NUM_E;
+			DRM_DEBUG_DRIVER("GPIO is in the east Block\n");
+		}
+	} else
+		block = IOSF_PORT_GPIO_NC;
+
+	family_num =  gpio / CHV_VBT_MAX_PINS_PER_FMLY;
+	gpio = gpio - (family_num * CHV_VBT_MAX_PINS_PER_FMLY);
+	pad = CHV_PAD_FMLY_BASE + (family_num * CHV_PAD_FMLY_SIZE) +
+			(((u16)gpio) * CHV_PAD_CFG_0_1_REG_SIZE);
+	function = pad + CHV_PAD_CFG_REG_SIZE;
+
+	mutex_lock(&dev_priv->sb_lock);
+	vlv_gpio_write(dev_priv, block, function,
+					CHV_GPIO_CFG_UNLOCK);
+	vlv_gpio_write(dev_priv, block, pad, CHV_GPIO_CFG_HiZ |
+			(action << CHV_GPIO_CFG_TX_STATE_SHIFT));
+	mutex_unlock(&dev_priv->sb_lock);
+
+	*cur_data = data;
+
+	return 0;
+}
+
+static int vlv_program_gpio(struct intel_dsi *intel_dsi,
+		const u8 *data, const u8 **cur_data)
+{
 	struct drm_device *dev = intel_dsi->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	DRM_DEBUG_DRIVER("MIPI: executing gpio element\n");
+	u8 gpio, action;
+	u16 function, pad;
+	u32 val;
+	u8 block;
 
 	/*
 	 * Skipping the first byte as it is of no
@@ -444,39 +502,62 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
 
 	if (dev_priv->vbt.dsi.seq_version >= 3) {
 		if (gpio <= MAX_GPIO_NUM_NC) {
-			DRM_DEBUG_DRIVER("GPIO is in the north Block\n");
 			block = IOSF_PORT_GPIO_NC;
+			DRM_DEBUG_DRIVER("GPIO is in the north Block\n");
 		} else if (gpio > MAX_GPIO_NUM_NC && gpio <= MAX_GPIO_NUM_SC) {
-			DRM_DEBUG_DRIVER("GPIO is in the south Block\n");
 			block = IOSF_PORT_GPIO_SC;
+			DRM_DEBUG_DRIVER("GPIO is in the south Block\n");
 		} else if (gpio > MAX_GPIO_NUM_SC && gpio <= MAX_GPIO_NUM) {
-			DRM_DEBUG_DRIVER("GPIO is in the SUS Block\n");
 			block = IOSF_PORT_GPIO_SUS;
+			DRM_DEBUG_DRIVER("GPIO is in the SUS Block\n");
 		} else {
 			DRM_ERROR("GPIO number is not present in the table\n");
-			return NULL;
+			return -EINVAL;
 		}
-	} else {
+	} else
 		block = IOSF_PORT_GPIO_NC;
-	}
 
 	function = gtable[gpio].function_reg;
 	pad = gtable[gpio].pad_reg;
 
 	mutex_lock(&dev_priv->sb_lock);
+
 	if (!gtable[gpio].init) {
-		/* program the function */
-		/* FIXME: remove constant below */
-		vlv_gpio_write(dev_priv, IOSF_PORT_GPIO_NC, function, 0x2000CC00);
-		gtable[gpio].init = 1;
+		vlv_gpio_write(dev_priv, block, function,
+				VLV_GPIO_CFG);
+		gtable[gpio].init = true;
 	}
-
-	val = 0x4 | action;
+	val = VLV_GPIO_INPUT_DIS | action;
 
 	/* pull up/down */
-	vlv_gpio_write(dev_priv, IOSF_PORT_GPIO_NC, pad, val);
+	vlv_gpio_write(dev_priv, block, pad, val);
+
 	mutex_unlock(&dev_priv->sb_lock);
 
+	*cur_data = data;
+
+	return 0;
+}
+
+static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
+{
+	struct drm_device *dev = intel_dsi->base.base.dev;
+	int ret;
+
+	DRM_DEBUG_DRIVER("MIPI: executing gpio element\n");
+
+	ret = -EINVAL;
+
+	if (IS_CHERRYVIEW(dev))
+		ret = chv_program_gpio(intel_dsi, data, &data);
+	else if (IS_VALLEYVIEW(dev))
+		ret = vlv_program_gpio(intel_dsi, data, &data);
+	else
+		DRM_ERROR("GPIO programming missing for this platform.\n");
+
+	if (ret)
+		return NULL;
+
 	return data;
 }
 
-- 
1.7.9.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2015-09-09 23:20 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-09 23:24 [MIPI SEQ PARSING v2 PATCH 00/11] Patches to support the version 3 of MIPI sequence in VBT Deepak M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 01/11] drm/i915: Adding the parsing logic for the i2c element Deepak M
2015-09-17  9:18   ` Jani Nikula
2015-09-22  6:46     ` Deepak, M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 02/11] drm/i915: Updating asle structure with new fields Deepak M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 03/11] drm/i915: Parsing VBT if size of VBT exceeds 6KB Deepak M
2015-09-16 13:24   ` Jani Nikula
2015-09-17 12:10   ` Jani Nikula
2015-09-22  6:37     ` Deepak, M
2015-09-22  7:24       ` Jani Nikula
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 04/11] drm/i915: Using the approprite vbt size if vbt is not in mailbox4 of opregion Deepak M
2015-09-17 12:18   ` Jani Nikula
2015-09-17 13:31     ` Jani Nikula
2015-09-22  6:11       ` Deepak, M
2015-09-22  6:24     ` Deepak, M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 05/11] drm/i915: Added support the v3 mipi sequence block Deepak M
2015-09-17 14:38   ` Jani Nikula
2015-09-22  6:23     ` Deepak, M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 06/11] drm/i915: extending gpio read/write to other cores Deepak M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 07/11] drm/i915: Added the generic gpio sequence support and gpio table Deepak M
2015-09-17 14:44   ` Jani Nikula
2015-09-09 23:24 ` Deepak M [this message]
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 09/11] drm: Add few more wrapper functions for drm panel Deepak M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 10/11] drm/i915: Add functions to execute the new sequences from VBT Deepak M
2015-09-09 23:24 ` [MIPI SEQ PARSING v2 PATCH 11/11] drm/i915: BXT GPIO support for backlight and panel control Deepak M

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1441841070-11532-9-git-send-email-m.deepak@intel.com \
    --to=m.deepak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox