From: Ander Conselvan De Oliveira <conselvan2@gmail.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 07/14] drm/i915: Kill off intel_crtc->atomic.wait_vblank.
Date: Mon, 09 Nov 2015 17:08:53 +0200 [thread overview]
Message-ID: <1447081733.5942.29.camel@gmail.com> (raw)
In-Reply-To: <1446535913-31970-8-git-send-email-maarten.lankhorst@linux.intel.com>
On Tue, 2015-11-03 at 08:31 +0100, Maarten Lankhorst wrote:
> By handling this after the atomic helper waits for vblanks there will
> be one less wait for vblank in the atomic path.
I found this a bit confusing. Sounds like you are referring to calling
intel_post_enable_update() after the call to drm_atomic_helper_wait_for_vblanks(
), except that move wasn't mentioned before. Also, the patch replaces that call
with our own wait for vblank function, so it is probably good to mention why in
the commit message.
>
> Also get rid of the double wait_for_vblank on broadwell, looks like
> it's a bug doing the vblank wait twice.
Separate patch with more details in the commit message.
Ander
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_atomic.c | 1 +
> drivers/gpu/drm/i915/intel_display.c | 95 +++++++++++++++++++++++------------
> -
> drivers/gpu/drm/i915/intel_drv.h | 2 +-
> 3 files changed, 64 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c
> b/drivers/gpu/drm/i915/intel_atomic.c
> index 3e390db9d22b..2ba0cd698f9b 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -97,6 +97,7 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
> crtc_state->disable_lp_wm = false;
> crtc_state->visible_changed = false;
> crtc_state->wm_changed = false;
> + crtc_state->fb_changed = false;
>
> return &crtc_state->base;
> }
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 356e3a9e1741..2708899d9767 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4669,14 +4669,6 @@ intel_post_enable_primary(struct drm_crtc *crtc)
> int pipe = intel_crtc->pipe;
>
> /*
> - * BDW signals flip done immediately if the plane
> - * is disabled, even if the plane enable is already
> - * armed to occur at the next vblank :(
> - */
> - if (IS_BROADWELL(dev))
> - intel_wait_for_vblank(dev, pipe);
> -
> - /*
> * FIXME IPS should be fine as long as one plane is
> * enabled, but in practice it seems to have problems
> * when going from primary only to sprite only and vice
> @@ -4758,9 +4750,6 @@ static void intel_post_plane_update(struct intel_crtc
> *crtc)
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
>
> - if (atomic->wait_vblank)
> - intel_wait_for_vblank(dev, crtc->pipe);
> -
> intel_frontbuffer_flip(dev, atomic->fb_bits);
>
> crtc->wm.cxsr_allowed = true;
> @@ -11660,6 +11649,9 @@ int intel_plane_atomic_calc_changes(struct
> drm_crtc_state *crtc_state,
> if (!was_visible && !visible)
> return 0;
>
> + if (fb != old_plane_state->base.fb)
> + pipe_config->fb_changed = true;
> +
> turn_off = was_visible && (!visible || mode_changed);
> turn_on = visible && (!was_visible || mode_changed);
>
> @@ -11676,8 +11668,6 @@ int intel_plane_atomic_calc_changes(struct
> drm_crtc_state *crtc_state,
> /* must disable cxsr around plane enable/disable */
> if (plane->type != DRM_PLANE_TYPE_CURSOR) {
> pipe_config->visible_changed = true;
> - if (is_crtc_enabled)
> - intel_crtc->atomic.wait_vblank = true;
> }
> } else if ((was_visible || visible) &&
> intel_wm_need_update(plane, plane_state)) {
> @@ -11724,14 +11714,6 @@ int intel_plane_atomic_calc_changes(struct
> drm_crtc_state *crtc_state,
> plane_state->rotation != BIT(DRM_ROTATE_0))
> intel_crtc->atomic.disable_fbc = true;
>
> - /*
> - * BDW signals flip done immediately if the plane
> - * is disabled, even if the plane enable is already
> - * armed to occur at the next vblank :(
> - */
> - if (turn_on && IS_BROADWELL(dev))
> - intel_crtc->atomic.wait_vblank = true;
> -
> intel_crtc->atomic.update_fbc |= visible || mode_changed;
> break;
> case DRM_PLANE_TYPE_CURSOR:
> @@ -11746,12 +11728,10 @@ int intel_plane_atomic_calc_changes(struct
> drm_crtc_state *crtc_state,
> if (IS_IVYBRIDGE(dev) &&
> needs_scaling(to_intel_plane_state(plane_state)) &&
> !needs_scaling(old_plane_state)) {
> - to_intel_crtc_state(crtc_state)->disable_lp_wm =
> true;
> - } else if (turn_off && !mode_changed) {
> - intel_crtc->atomic.wait_vblank = true;
> + pipe_config->disable_lp_wm = true;
> + } else if (turn_off && !mode_changed)
> intel_crtc->atomic.update_sprite_watermarks |=
> 1 << i;
> - }
>
> break;
> }
> @@ -13261,6 +13241,48 @@ static int intel_atomic_prepare_commit(struct
> drm_device *dev,
> return ret;
> }
>
> +static void intel_atomic_wait_for_vblanks(struct drm_device *dev,
> + struct drm_i915_private *dev_priv,
> + unsigned crtc_mask)
> +{
> + unsigned last_vblank_count[I915_MAX_PIPES];
> + enum pipe pipe;
> + int ret;
> +
> + if (!crtc_mask)
> + return;
> +
> + for_each_pipe(dev_priv, pipe) {
> + struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
> +
> + if (!((1 << pipe) & crtc_mask))
> + continue;
> +
> + ret = drm_crtc_vblank_get(crtc);
> + if (ret != 0) {
> + crtc_mask &= ~(1 << pipe);
> + continue;
> + }
> +
> + last_vblank_count[pipe] = drm_crtc_vblank_count(crtc);
> + }
> +
> + for_each_pipe(dev_priv, pipe) {
> + struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
> +
> + if (!((1 << pipe) & crtc_mask))
> + continue;
> +
> + wait_event_timeout(dev->vblank[pipe].queue,
> + last_vblank_count[pipe] !=
> + drm_crtc_vblank_count(crtc),
> + msecs_to_jiffies(50));
> +
> + drm_crtc_vblank_put(crtc);
> + }
> +}
> +
> +
> /**
> * intel_atomic_commit - commit validated state object
> * @dev: DRM device
> @@ -13283,11 +13305,11 @@ static int intel_atomic_commit(struct drm_device
> *dev,
> {
> struct intel_atomic_state *intel_state =
> to_intel_atomic_state(state);
> struct drm_i915_private *dev_priv = dev->dev_private;
> + bool hw_check = intel_state->modeset;
> struct drm_crtc_state *crtc_state;
> struct drm_crtc *crtc;
> - int ret = 0;
> - int i;
> - bool hw_check = intel_state->modeset;
> + int ret = 0, i;
> + unsigned crtc_vblank_mask = 0;
>
> ret = intel_atomic_prepare_commit(dev, state, async);
> if (ret) {
> @@ -13335,8 +13357,9 @@ static int intel_atomic_commit(struct drm_device *dev,
> for_each_crtc_in_state(state, crtc, crtc_state, i) {
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> bool modeset = needs_modeset(crtc->state);
> - bool update_pipe = !modeset &&
> - to_intel_crtc_state(crtc->state)->update_pipe;
> + struct intel_crtc_state *pipe_config =
> + to_intel_crtc_state(crtc->state);
> + bool update_pipe = !modeset && pipe_config->update_pipe;
> unsigned long put_domains = 0;
>
> if (modeset && crtc->state->active) {
> @@ -13358,15 +13381,21 @@ static int intel_atomic_commit(struct drm_device
> *dev,
> (crtc->state->planes_changed || update_pipe))
> drm_atomic_helper_commit_planes_on_crtc(crtc_state);
>
> + if (pipe_config->base.active &&
> + (pipe_config->wm_changed || pipe_config->visible_changed
> ||
> + pipe_config->fb_changed))
> + crtc_vblank_mask |= 1 << i;
> +
> if (put_domains)
> modeset_put_power_domains(dev_priv, put_domains);
> -
> - intel_post_plane_update(intel_crtc);
> }
>
> /* FIXME: add subpixel order */
>
> - drm_atomic_helper_wait_for_vblanks(dev, state);
> + intel_atomic_wait_for_vblanks(dev, dev_priv, crtc_vblank_mask);
> +
> + for_each_crtc_in_state(state, crtc, crtc_state, i)
> + intel_post_plane_update(to_intel_crtc(crtc));
>
> mutex_lock(&dev->struct_mutex);
> drm_atomic_helper_cleanup_planes(dev, state);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 59367453d24b..6f99c7398af3 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -375,6 +375,7 @@ struct intel_crtc_state {
> bool update_pipe; /* can a fast modeset be performed? */
> bool visible_changed; /* plane visibility changed */
> bool wm_changed; /* wm changed */
> + bool fb_changed; /* fb on any of the planes is changed */
>
> /* Pipe source size (ie. panel fitter input size)
> * All planes will be positioned inside this space,
> @@ -541,7 +542,6 @@ struct intel_crtc_atomic_commit {
>
> /* Sleepable operations to perform after commit */
> unsigned fb_bits;
> - bool wait_vblank;
> bool update_fbc;
> bool post_enable_primary;
> unsigned update_sprite_watermarks;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-11-09 15:08 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-03 7:31 [PATCH v2 00/14] Kill off intel_crtc->atomic, rework Maarten Lankhorst
2015-11-03 7:31 ` [PATCH v2 01/14] drm/i915: Use passed plane state for sprite planes, v3 Maarten Lankhorst
2015-11-03 9:22 ` Ville Syrjälä
2015-11-03 10:26 ` Maarten Lankhorst
2015-11-03 7:31 ` [PATCH v2 02/14] drm/i915: Extend DSL readout fix to BDW and SKL Maarten Lankhorst
2015-11-03 9:23 ` Ville Syrjälä
2015-11-03 11:32 ` Jani Nikula
2015-11-03 12:44 ` Maarten Lankhorst
2015-11-05 16:33 ` Jesse Barnes
2015-11-06 9:47 ` Jani Nikula
2015-11-03 7:31 ` [PATCH v2 03/14] drm/i915: Do not acquire crtc state to check clock during modeset, v2 Maarten Lankhorst
2015-11-03 10:09 ` Maarten Lankhorst
2015-11-03 7:31 ` [PATCH v2 04/14] drm/i915: Handle cdclk limits on broadwell Maarten Lankhorst
2015-11-03 7:31 ` [PATCH v2 05/14] drm/i915/bxt: Use the bypass frequency if there are no active pipes Maarten Lankhorst
2015-11-03 7:31 ` [PATCH v2 06/14] drm/i915: Update watermark related members in the crtc_state, v2 Maarten Lankhorst
2015-11-09 14:48 ` Ander Conselvan De Oliveira
2015-11-09 16:10 ` Maarten Lankhorst
2015-11-09 16:20 ` Ville Syrjälä
2015-11-03 7:31 ` [PATCH v2 07/14] drm/i915: Kill off intel_crtc->atomic.wait_vblank Maarten Lankhorst
2015-11-09 15:08 ` Ander Conselvan De Oliveira [this message]
2015-11-03 7:31 ` [PATCH v2 08/14] drm/i915: Remove intel_crtc->atomic.disable_ips Maarten Lankhorst
2015-11-09 15:28 ` Ander Conselvan De Oliveira
2015-11-03 7:31 ` [PATCH v2 09/14] drm/i915: Remove atomic.pre_disable_primary Maarten Lankhorst
2015-11-10 11:29 ` Ander Conselvan De Oliveira
2015-11-03 7:31 ` [PATCH v2 10/14] drm/i915: Remove update_sprite_watermarks Maarten Lankhorst
2015-11-03 16:58 ` Matt Roper
2015-11-03 7:31 ` [PATCH v2 11/14] drm/i915: Remove some post-commit members from intel_crtc->atomic Maarten Lankhorst
2015-11-10 12:31 ` Ander Conselvan De Oliveira
2015-11-03 7:31 ` [PATCH v2 12/14] drm/i915: Nuke fbc " Maarten Lankhorst
2015-11-10 13:21 ` Ander Conselvan De Oliveira
2015-11-03 7:31 ` [PATCH v2 13/14] drm/i915/skl: Update watermarks before the crtc is disabled Maarten Lankhorst
2015-11-03 7:31 ` [PATCH v2 14/14] drm/i915/skl: Do not allow scaling when " Maarten Lankhorst
2015-11-03 9:09 ` Ville Syrjälä
2015-11-03 10:06 ` Maarten Lankhorst
2015-11-03 10:40 ` Ville Syrjälä
2015-11-03 12:00 ` Maarten Lankhorst
2015-11-03 13:11 ` Ville Syrjälä
2015-11-17 13:59 ` Maarten Lankhorst
2015-11-17 14:19 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447081733.5942.29.camel@gmail.com \
--to=conselvan2@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=maarten.lankhorst@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox