public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Wayne Boyer <wayne.boyer@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH] drm/i915/skl: implement DP Aux Mutex framework
Date: Mon,  9 Nov 2015 15:35:06 -0800	[thread overview]
Message-ID: <1447112106-20847-1-git-send-email-wayne.boyer@intel.com> (raw)

Beginning with SKL the DP Aux channel communication can be protected
using a built in H/W mutex.

This patch provides an initial implementation for using that mutex.
The use is currently limited to protecting the sink crc request based
on feedback from the H/W designers indicating that using the mutex
for all aux channel communication is not recommended.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h |  1 +
 drivers/gpu/drm/i915/i915_reg.h |  5 ++++
 drivers/gpu/drm/i915/intel_dp.c | 52 ++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index b12594b..98e991d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2604,6 +2604,7 @@ struct drm_i915_cmd_table {
 
 #define HAS_DDI(dev)		(INTEL_INFO(dev)->has_ddi)
 #define HAS_FPGA_DBG_UNCLAIMED(dev)	(INTEL_INFO(dev)->has_fpga_dbg)
+#define HAS_AUX_MUTEX(dev)	(INTEL_INFO(dev)->gen >= 9)
 #define HAS_PSR(dev)		(IS_HASWELL(dev) || IS_BROADWELL(dev) || \
 				 IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev) || \
 				 IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8942532..a033e70 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4288,6 +4288,11 @@ enum skl_disp_power_wells {
 #define   DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(c) (((c) - 1) << 5)
 #define   DP_AUX_CH_CTL_SYNC_PULSE_SKL(c)   ((c) - 1)
 
+#define DP_AUX_MUTEX_A			0x6402C
+#define DP_AUX_MUTEX_B			0x6412C
+#define   DP_AUX_MUTEX_ENABLE		    (1 << 31)
+#define   DP_AUX_MUTEX_STATUS		    (1 << 30)
+
 /*
  * Computing GMCH M and N values for the Display Port link
  *
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2fad873..e9e1239 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -781,6 +781,47 @@ static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp,
 	       DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
 }
 
+static bool skl_aux_mutex(struct intel_dp *intel_dp, bool get)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t aux_ch_mutex, status;
+	int count = 0;
+
+	if (!HAS_AUX_MUTEX(dev))
+		return false;
+
+	/*
+	 * FIXME: determine actual aux channel
+	 * Hard coded to channel A for now to protect sink crc requests on eDP.
+	 */
+	aux_ch_mutex = DP_AUX_MUTEX_A;
+
+	if (!get) {
+		I915_WRITE(aux_ch_mutex, DP_AUX_MUTEX_ENABLE | DP_AUX_MUTEX_STATUS);
+		return false;
+	}
+
+	/*
+	 * The Bspec specifies waiting 500us between attempts to acquire the
+	 * mutex.  Ten retries should be adequate to balance successfully
+	 * acquirng the mutex and spending too much time trying.
+	 */
+	while (count++ < 10) {
+		I915_WRITE(aux_ch_mutex, DP_AUX_MUTEX_ENABLE);
+		status = I915_READ(aux_ch_mutex);
+		if (!(status & DP_AUX_MUTEX_STATUS))
+			return true;
+		udelay(500);
+	}
+
+	return false;
+}
+
+#define skl_aux_mutex_get(dev) skl_aux_mutex(dev, true)
+#define skl_aux_mutex_put(dev) skl_aux_mutex(dev, false)
+
 static int
 intel_dp_aux_ch(struct intel_dp *intel_dp,
 		const uint8_t *send, int send_bytes,
@@ -4188,10 +4229,14 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
 	u8 buf;
 	int count, ret;
 	int attempts = 6;
+	bool aux_mutex_acquired = false;
+
+	aux_mutex_acquired = skl_aux_mutex_get(intel_dp);
 
 	ret = intel_dp_sink_crc_start(intel_dp);
+
 	if (ret)
-		return ret;
+		goto release;
 
 	do {
 		intel_wait_for_vblank(dev, intel_crtc->pipe);
@@ -4218,6 +4263,11 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
 
 stop:
 	intel_dp_sink_crc_stop(intel_dp);
+
+release:
+	if (aux_mutex_acquired)
+		aux_mutex_acquired = skl_aux_mutex_put(intel_dp);
+
 	return ret;
 }
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2015-11-09 23:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-09 23:35 Wayne Boyer [this message]
2015-11-10 10:51 ` [PATCH] drm/i915/skl: implement DP Aux Mutex framework Jani Nikula
2015-11-10 11:14   ` Dave Airlie
2015-11-10 15:31     ` Vivi, Rodrigo
2015-11-11  0:49     ` Wayne Boyer
  -- strict thread matches above, loose matches on Subject: below --
2015-11-11 19:05 [PATCH 5/5] " Rodrigo Vivi
2015-11-12  0:41 ` [PATCH] drm/i915/skl: Implement " Wayne Boyer
2015-11-12 10:16   ` Jani Nikula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447112106-20847-1-git-send-email-wayne.boyer@intel.com \
    --to=wayne.boyer@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox