[PATCH v2 09/12] drm/i915: Explain usage of power well IDs vs bit groups

[Patrik Jakobsson <patrik.jakobsson@linux.intel.com>]

v2: Add explanation of the fixed power well bits (Imre)

Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e6d88f5..0f3849f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -609,6 +609,7 @@
 
 /* See the PUNIT HAS v0.8 for the below bits */
 enum punit_power_well {
+	/* These numbers are fixed and must match the position of the pw bits */
 	PUNIT_POWER_WELL_RENDER			= 0,
 	PUNIT_POWER_WELL_MEDIA			= 1,
 	PUNIT_POWER_WELL_DISP2D			= 3,
@@ -621,10 +622,12 @@ enum punit_power_well {
 	PUNIT_POWER_WELL_DPIO_RX1		= 11,
 	PUNIT_POWER_WELL_DPIO_CMN_D		= 12,
 
+	/* Not actual bit groups. Used as IDs for lookup_power_well() */
 	PUNIT_POWER_WELL_ALWAYS_ON,
 };
 
 enum skl_disp_power_wells {
+	/* These numbers are fixed and must match the position of the pw bits */
 	SKL_DISP_PW_MISC_IO,
 	SKL_DISP_PW_DDI_A_E,
 	SKL_DISP_PW_DDI_B,
@@ -633,6 +636,7 @@ enum skl_disp_power_wells {
 	SKL_DISP_PW_1 = 14,
 	SKL_DISP_PW_2,
 
+	/* Not actual bit groups. Used as IDs for lookup_power_well() */
 	SKL_DISP_PW_ALWAYS_ON,
 };
 
-- 
2.5.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx