[PATCH v2] drm/i915: Correct max delay for HDMI hotplug live status checking

[Gary Wang <gary.c.wang@intel.com>]

The total delay of HDMI hotplug detecting with 30ms have already
been split into a resolution of 3 retries of 10ms each, for the worst
cases. But it still suffered from only waiting 10ms at most in
intel_hdmi_detect(). This patch corrects it by reading hotplug status
with 4 times at most for 30ms delay.

v2:
- straight up to loop execution for more clear in code readability

Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gavin Hindman <gavin.hindman@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Gary Wang <gary.c.wang@intel.com>
---
 drivers/gpu/drm/i915/intel_hdmi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
 mode change 100644 => 100755 drivers/gpu/drm/i915/intel_hdmi.c

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
old mode 100644
new mode 100755
index 6825543..97ed16f
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1387,16 +1387,18 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
 	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
 	struct drm_i915_private *dev_priv = to_i915(connector->dev);
 	bool live_status = false;
-	unsigned int retry = 3;
+	unsigned int retry;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
 		      connector->base.id, connector->name);
 
 	intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS);
 
-	while (!live_status && --retry) {
+	for (retry = 0; retry <= 3; retry++) {
 		live_status = intel_digital_port_connected(dev_priv,
 				hdmi_to_dig_port(intel_hdmi));
+		if (live_status || (retry == 3))
+			break;
 		mdelay(10);
 	}
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx