[PATCH v3.1/10] drm/i915: get a permanent RPM reference on platforms w/o RPM support

[Imre Deak <imre.deak@intel.com>]

Currently we disable RPM functionality on platforms that doesn't support
this by not putting/getting the RPM reference we receive from the RPM
core during driver loading/unloading respectively. This is somewhat
obscure, so make it more explicit by keeping a reference dedicated for
this particular purpose whenever the driver is loaded. This makes it
possible to remove the HAS_RUNTIME_PM() special casing from every other
places in the next patch.

v2:
- fix intel_runtime_pm_get vs. intel_runtime_pm_put in
  intel_power_domains_fini()
v3:
- take only a low level RPM reference so the ref tracking asserts
  continue to work (Ville)
- update the commit message
- move the patch earlier for bisectability

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_runtime_pm.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index fc7cf2c..bf2492f 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -1975,6 +1975,8 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
  */
 void intel_power_domains_fini(struct drm_i915_private *dev_priv)
 {
+	struct device *device = &dev_priv->dev->pdev->dev;
+
 	/*
 	 * The i915.ko module is still not prepared to be loaded when
 	 * the power well is not enabled, so just enable it in case
@@ -1989,6 +1991,13 @@ void intel_power_domains_fini(struct drm_i915_private *dev_priv)
 	/* Remove the refcount we took to keep power well support disabled. */
 	if (!i915.disable_power_well)
 		intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
+
+	/*
+	 * Remove the refcount we took in intel_runtime_pm_enable() in case
+	 * the platform doesn't support runtime PM.
+	 */
+	if (!HAS_RUNTIME_PM(dev_priv))
+		pm_runtime_put(device);
 }
 
 static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv)
@@ -2303,8 +2312,14 @@ void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
 	struct drm_device *dev = dev_priv->dev;
 	struct device *device = &dev->pdev->dev;
 
+	/*
+	 * Take a permanent reference to disable the RPM functionality and drop
+	 * it only when unloading the driver. Use the low level get/put helpers,
+	 * so the driver's own RPM reference tracking asserts also work on
+	 * platforms without RPM support.
+	 */
 	if (!HAS_RUNTIME_PM(dev))
-		return;
+		pm_runtime_get_sync(device);
 
 	pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */
 	pm_runtime_mark_last_busy(device);
-- 
2.5.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx