intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: abhay.kumar@intel.com
To: Intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915: edp resume/On time optimization.
Date: Thu, 17 Dec 2015 22:27:56 -0800	[thread overview]
Message-ID: <1450420076-3830-1-git-send-email-abhay.kumar@intel.com> (raw)

From: Abhay Kumar <abhay.kumar@intel.com>

Make resume codepath not to wait for panel_power_cycle_delay(t11_t12)
if this time is already spent in suspend/poweron time.

Change-Id: Ied0f10f82776af8e6e8ff561bb4e5c0ce1dad4b3
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
---
 drivers/gpu/drm/i915/intel_ddi.c |  3 +++
 drivers/gpu/drm/i915/intel_dp.c  | 21 +++++++++++++--------
 drivers/gpu/drm/i915/intel_drv.h |  2 +-
 3 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index cbabcb4..fe99d72 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2347,6 +2347,9 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
 		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
 		intel_edp_panel_vdd_on(intel_dp);
 		intel_edp_panel_off(intel_dp);
+
+		/* storing panel power off time */
+		intel_dp->panel_power_off_time = ktime_get_with_offset(TK_OFFS_BOOT);
 	}
 
 	if (IS_SKYLAKE(dev))
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index acda70e..509da67 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -38,7 +38,6 @@
 #include "intel_drv.h"
 #include <drm/i915_drm.h>
 #include "i915_drv.h"
-
 #define DP_LINK_CHECK_TIMEOUT	(10 * 1000)
 
 /* Compliance test status bits  */
@@ -1654,13 +1653,21 @@ static void wait_panel_off(struct intel_dp *intel_dp)
 
 static void wait_panel_power_cycle(struct intel_dp *intel_dp)
 {
+	ktime_t panel_power_on_time;
+	u32 panel_power_off_duration;
+
 	DRM_DEBUG_KMS("Wait for panel power cycle\n");
 
-	/* When we disable the VDD override bit last we have to do the manual
-	 * wait. */
-	wait_remaining_ms_from_jiffies(intel_dp->last_power_cycle,
-				       intel_dp->panel_power_cycle_delay);
+        /* take the diffrence of currrent time and panel power off time
+           and then make panel wait for t11_t12 if needed */
+        panel_power_on_time = ktime_get_with_offset(TK_OFFS_BOOT);
+        panel_power_off_duration = (panel_power_on_time.tv64 - intel_dp->panel_power_off_time.tv64) / 1000000;
 
+	/* When we disable the VDD override bit last we have to do the manual
+	 * wait */
+	if (panel_power_off_duration < intel_dp->panel_power_cycle_delay)
+		wait_remaining_ms_from_jiffies(jiffies,
+				       (intel_dp->panel_power_cycle_delay - panel_power_off_duration));
 	wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
 }
 
@@ -1811,7 +1818,7 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp)
 	I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
 
 	if ((pp & POWER_TARGET_ON) == 0)
-		intel_dp->last_power_cycle = jiffies;
+		intel_dp->panel_power_off_time = ktime_get_with_offset(TK_OFFS_BOOT);
 
 	power_domain = intel_display_port_power_domain(intel_encoder);
 	intel_display_power_put(dev_priv, power_domain);
@@ -1960,7 +1967,6 @@ static void edp_panel_off(struct intel_dp *intel_dp)
 	I915_WRITE(pp_ctrl_reg, pp);
 	POSTING_READ(pp_ctrl_reg);
 
-	intel_dp->last_power_cycle = jiffies;
 	wait_panel_off(intel_dp);
 
 	/* We got a reference when we enabled the VDD. */
@@ -5196,7 +5202,6 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
 
 static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
 {
-	intel_dp->last_power_cycle = jiffies;
 	intel_dp->last_power_on = jiffies;
 	intel_dp->last_backlight_off = jiffies;
 }
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index d44f2f5..ef82e8f 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -722,9 +722,9 @@ struct intel_dp {
 	int backlight_off_delay;
 	struct delayed_work panel_vdd_work;
 	bool want_panel_vdd;
-	unsigned long last_power_cycle;
 	unsigned long last_power_on;
 	unsigned long last_backlight_off;
+	ktime_t panel_power_off_time;
 
 	struct notifier_block edp_notifier;
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2015-12-18  6:27 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-18  6:27 abhay.kumar [this message]
2015-12-18  7:01 ` [PATCH] drm/i915: edp resume/On time optimization kbuild test robot
2015-12-18  9:01 ` ✗ failure: Fi.CI.BAT Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2016-01-11 22:55 [PATCH] drm/i915: edp resume/On time optimization abhay.kumar
2016-01-12 13:48 ` Ville Syrjälä
2015-12-22  1:18 abhay.kumar
2016-01-05  1:30 ` Kumar, Abhay
2016-01-05 11:04   ` Daniel Vetter
2016-01-05 20:43     ` Kumar, Abhay
2016-01-05 21:14 ` Kumar, Abhay
2016-01-07 18:15 ` Ville Syrjälä
2016-01-08  2:27   ` Kumar, Abhay
2016-01-08 12:55     ` Ville Syrjälä
2015-12-18 19:55 abhay.kumar
2015-12-21  5:33 ` Kumar, Abhay
2015-12-21 15:57   ` Daniel Vetter
2015-12-21 16:55     ` Kumar, Abhay
2015-12-15 22:16 abhay.kumar
2015-12-16  0:23 ` Kumar, Abhay
2015-12-16 10:41 ` Kumar, Shobhit
2015-12-16 10:55 ` Ville Syrjälä
2015-12-17  1:04   ` Kumar, Abhay
2015-12-17 11:37     ` Ville Syrjälä

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450420076-3830-1-git-send-email-abhay.kumar@intel.com \
    --to=abhay.kumar@intel.com \
    --cc=Intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).