intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Intel-gfx@lists.freedesktop.org
Subject: [PATCH v2] drm/i915: Only grab timestamps when needed
Date: Wed, 13 Jan 2016 13:54:24 +0000	[thread overview]
Message-ID: <1452693264-819-1-git-send-email-tvrtko.ursulin@linux.intel.com> (raw)
In-Reply-To: <20160112171457.GM19130@phenom.ffwll.local>

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

No need to call ktime_get_raw_ns twice per unlimited wait and can
also elimate a local variable.

v2: Added comment about silencing the compiler warning. (Daniel Vetter)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/i915/i915_gem.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ddc21d4b388d..6b0102da859c 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1251,7 +1251,7 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
 	int state = interruptible ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE;
 	DEFINE_WAIT(wait);
 	unsigned long timeout_expire;
-	s64 before, now;
+	s64 before = 0; /* Only to silence a compiler warning. */
 	int ret;
 
 	WARN(!intel_irqs_enabled(dev_priv), "IRQs disabled");
@@ -1271,14 +1271,17 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
 			return -ETIME;
 
 		timeout_expire = jiffies + nsecs_to_jiffies_timeout(*timeout);
+
+		/*
+		 * Record current time in case interrupted by signal, or wedged.
+		 */
+		before = ktime_get_raw_ns();
 	}
 
 	if (INTEL_INFO(dev_priv)->gen >= 6)
 		gen6_rps_boost(dev_priv, rps, req->emitted_jiffies);
 
-	/* Record current time in case interrupted by signal, or wedged */
 	trace_i915_gem_request_wait_begin(req);
-	before = ktime_get_raw_ns();
 
 	/* Optimistic spin for the next jiffie before touching IRQs */
 	ret = __i915_spin_request(req, state);
@@ -1343,11 +1346,10 @@ int __i915_wait_request(struct drm_i915_gem_request *req,
 	finish_wait(&ring->irq_queue, &wait);
 
 out:
-	now = ktime_get_raw_ns();
 	trace_i915_gem_request_wait_end(req);
 
 	if (timeout) {
-		s64 tres = *timeout - (now - before);
+		s64 tres = *timeout - (ktime_get_raw_ns() - before);
 
 		*timeout = tres < 0 ? 0 : tres;
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-01-13 13:54 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-11 14:08 [PATCH v3 0/7] Misc cleanups and locking fixes Tvrtko Ursulin
2016-01-11 14:08 ` [PATCH 1/7] drm/i915/bdw+: Replace list_del+list_add_tail with list_move_tail Tvrtko Ursulin
2016-01-11 14:08 ` [PATCH 2/7] drm/i915: Do not call API requiring struct_mutex where it is not available Tvrtko Ursulin
2016-01-11 14:35   ` Chris Wilson
2016-01-12 11:41   ` [PATCH v2 " Tvrtko Ursulin
2016-01-12 15:47     ` Dave Gordon
2016-01-13 16:16       ` [PATCH v3] " Tvrtko Ursulin
2016-01-13 19:34         ` Chris Wilson
2016-01-11 14:08 ` [PATCH 3/7] drm/i915: Cache ringbuffer GTT address Tvrtko Ursulin
2016-01-11 14:30   ` Chris Wilson
2016-01-11 14:31   ` Chris Wilson
2016-01-11 15:06     ` Tvrtko Ursulin
2016-01-11 14:08 ` [PATCH 4/7] drm/i915: Cache LRC state page in the context Tvrtko Ursulin
2016-01-11 14:29   ` Chris Wilson
2016-01-11 15:07     ` Tvrtko Ursulin
2016-01-12 11:43     ` [PATCH v2 " Tvrtko Ursulin
2016-01-12 11:56     ` [PATCH v3 " Tvrtko Ursulin
2016-01-12 12:12       ` Chris Wilson
2016-01-12 12:54         ` Tvrtko Ursulin
2016-01-12 13:11           ` Chris Wilson
2016-01-12 16:45             ` Dave Gordon
2016-01-13  1:37               ` Chris Wilson
2016-01-13 13:49               ` Tvrtko Ursulin
2016-01-11 14:08 ` [PATCH 5/7] drm/i915: Don't need a timer to wake us up Tvrtko Ursulin
2016-01-11 14:33   ` Chris Wilson
2016-01-12 10:20     ` Tvrtko Ursulin
2016-01-11 14:08 ` [PATCH 6/7] drm/i915: Only grab timestamps when needed Tvrtko Ursulin
2016-01-11 14:36   ` Chris Wilson
2016-01-11 15:04     ` Tvrtko Ursulin
2016-01-12 15:52       ` Dave Gordon
2016-01-12 17:14         ` Daniel Vetter
2016-01-13 13:54           ` Tvrtko Ursulin [this message]
2016-01-11 14:08 ` [PATCH 7/7] drm/i915: GEM operations need to be done under the big lock Tvrtko Ursulin
2016-01-11 14:38   ` Chris Wilson
2016-01-11 14:47     ` Tvrtko Ursulin
2016-01-11 15:00       ` Chris Wilson
2016-01-11 15:04         ` Chris Wilson
2016-01-11 15:16           ` Tvrtko Ursulin
2016-01-11 15:36             ` Ville Syrjälä
2016-01-11 16:56               ` Chris Wilson
2016-01-13 12:46                 ` Tvrtko Ursulin
2016-01-13 13:36                   ` Imre Deak
2016-01-13 14:11                     ` Tvrtko Ursulin
2016-01-13 14:32                       ` Chris Wilson
2016-01-13 14:41                         ` Imre Deak
2016-01-13 14:53                           ` Tvrtko Ursulin
2016-01-13 15:25                             ` Imre Deak
2016-01-13 15:55                               ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1452693264-819-1-git-send-email-tvrtko.ursulin@linux.intel.com \
    --to=tvrtko.ursulin@linux.intel.com \
    --cc=Intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).