From: tom.orourke@intel.com
To: intel-gfx@lists.freedesktop.org
Subject: [RFC 15/22] drm/i915/slpc: Notification of Refresh Rate change
Date: Wed, 20 Jan 2016 18:26:17 -0800 [thread overview]
Message-ID: <1453343184-160456-16-git-send-email-tom.orourke@intel.com> (raw)
In-Reply-To: <1453343184-160456-1-git-send-email-tom.orourke@intel.com>
From: Sagar Arun Kamble <sagar.a.kamble@intel.com>
This patch will inform GuC SLPC about changes in the refresh rate
due to Seamless DRRS. Refresh rate changes due to Static DRRS will
be notified via commit path.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Acked-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 2 ++
drivers/gpu/drm/i915/intel_slpc.c | 22 ++++++++++++++++++++++
drivers/gpu/drm/i915/intel_slpc.h | 1 +
3 files changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e2bea710..5100e8c 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5434,6 +5434,8 @@ static void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
dev_priv->drrs.refresh_rate_type = index;
DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate);
+
+ intel_slpc_update_display_rr_info(dev, refresh_rate);
}
/**
diff --git a/drivers/gpu/drm/i915/intel_slpc.c b/drivers/gpu/drm/i915/intel_slpc.c
index f5f7cad..c15ab19 100644
--- a/drivers/gpu/drm/i915/intel_slpc.c
+++ b/drivers/gpu/drm/i915/intel_slpc.c
@@ -317,3 +317,25 @@ int intel_slpc_update_display_mode_info(struct drm_device *dev)
return 0;
}
+
+int intel_slpc_update_display_rr_info(struct drm_device *dev, u32 refresh_rate)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+ struct intel_display_pipe_basic_info *per_pipe_info;
+ struct intel_slpc_display_mode_event_params *display_params;
+
+ if (!HAS_SLPC(dev))
+ return -EINVAL;
+
+ display_params = &dev_priv->guc.slpc.display_mode_params;
+ crtc = dp_to_dig_port(dev_priv->drrs.dp)->base.base.crtc;
+
+ per_pipe_info = &display_params->per_pipe_info[to_intel_crtc(crtc)->pipe];
+ per_pipe_info->refresh_rate = refresh_rate;
+ per_pipe_info->vsync_ft_usec = 1000000 / refresh_rate;
+
+ host2guc_slpc_display_mode_change(dev_priv);
+
+ return 0;
+}
diff --git a/drivers/gpu/drm/i915/intel_slpc.h b/drivers/gpu/drm/i915/intel_slpc.h
index 18e551b..bb1d12e 100644
--- a/drivers/gpu/drm/i915/intel_slpc.h
+++ b/drivers/gpu/drm/i915/intel_slpc.h
@@ -153,5 +153,6 @@ int intel_slpc_disable(struct drm_device *dev);
int intel_slpc_enable(struct drm_device *dev);
int intel_slpc_reset(struct drm_device *dev);
int intel_slpc_update_display_mode_info(struct drm_device *dev);
+int intel_slpc_update_display_rr_info(struct drm_device *dev, u32 refresh_rate);
#endif
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-01-21 2:27 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-21 2:26 [RFC 00/22] Add support for GuC-based SLPC tom.orourke
2016-01-21 2:26 ` [RFC 01/22] drm/i915: Enable GuC submission, where supported tom.orourke
2016-01-21 2:26 ` [RFC 02/22] drm/i915/slpc: Add has_slpc capability flag tom.orourke
2016-01-21 2:26 ` [RFC 03/22] drm/i915/slpc: Expose guc functions for use with SLPC tom.orourke
2016-01-21 2:26 ` [RFC 04/22] drm/i915/slpc: Use intel_slpc_* functions if supported tom.orourke
2016-01-21 2:26 ` [RFC 05/22] drm/i915/slpc: Enable/Disable RC6 in SLPC flows tom.orourke
2016-01-21 2:26 ` [RFC 06/22] drm/i915/slpc: If using SLPC, do not set frequency tom.orourke
2016-01-22 16:53 ` Daniel Vetter
2016-01-22 17:22 ` Daniel Vetter
2016-01-21 2:26 ` [RFC 07/22] drm/i915/slpc: Enable SLPC in guc if supported tom.orourke
2016-01-21 2:26 ` [RFC 08/22] drm/i915/slpc: Allocate/Release/Initialize SLPC shared data tom.orourke
2016-01-21 2:26 ` [RFC 09/22] drm/i915/slpc: Setup rps frequency values during SLPC init tom.orourke
2016-01-21 2:26 ` [RFC 10/22] drm/i915/slpc: Update current requested frequency tom.orourke
2016-01-21 2:26 ` [RFC 11/22] drm/i915/slpc: Send reset event tom.orourke
2016-01-21 2:26 ` [RFC 12/22] drm/i915/slpc: Send shutdown event tom.orourke
2016-01-21 2:26 ` [RFC 13/22] drm/i915/slpc: Add Display mode event related data structures tom.orourke
2016-01-21 2:26 ` [RFC 14/22] drm/i915/slpc: Notification of Display mode change tom.orourke
2016-01-21 13:24 ` Zanoni, Paulo R
2016-01-28 9:43 ` Kamble, Sagar A
2016-01-22 17:14 ` Ville Syrjälä
2016-01-29 5:00 ` Kamble, Sagar A
2016-01-21 2:26 ` tom.orourke [this message]
2016-01-21 2:26 ` [RFC 16/22] drm/i915/slpc: Add slpc_status enum values tom.orourke
2016-01-21 2:26 ` [RFC 17/22] drm/i915/slpc: Add i915_slpc_info to debugfs tom.orourke
2016-01-21 2:26 ` [RFC 18/22] drm/i915/slpc: Add dfps task info to i915_slpc_info tom.orourke
2016-01-21 2:26 ` [RFC 19/22] drm/i915/slpc: Add parameter unset/set/get functions tom.orourke
2016-01-21 2:26 ` [RFC 20/22] drm/i915/slpc: Add slpc support for max/min freq tom.orourke
2016-01-21 2:26 ` [RFC 21/22] drm/i915/slpc: Add enable/disable debugfs for slpc tom.orourke
2016-01-21 2:26 ` [RFC 22/22] drm/i915/slpc: Add has_slpc to skylake info tom.orourke
2016-01-21 13:50 ` ✗ Fi.CI.BAT: failure for Add support for GuC-based SLPC Patchwork
2016-01-21 23:16 ` O'Rourke, Tom
2016-01-22 17:07 ` Daniel Vetter
2016-01-22 17:00 ` [RFC 00/22] " Daniel Vetter
2016-01-26 15:45 ` Jesse Barnes
2016-01-26 17:00 ` Daniel Vetter
2016-01-26 17:17 ` Jesse Barnes
2016-01-27 1:17 ` O'Rourke, Tom
2016-02-09 12:08 ` Martin Peres
2016-02-10 7:37 ` Daniel Vetter
2016-02-10 10:31 ` Martin Peres
2016-02-03 20:25 ` Zanoni, Paulo R
2016-02-09 7:03 ` Kamble, Sagar A
2016-02-11 20:10 ` Zanoni, Paulo R
2016-02-09 11:56 ` Martin Peres
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453343184-160456-16-git-send-email-tom.orourke@intel.com \
--to=tom.orourke@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).