From: abhay.kumar@intel.com
To: Intel-gfx@lists.freedesktop.org, ville.syrjala@linux.intel.com
Subject: [PATCH V5] drm/i915: edp resume/On time optimization.
Date: Fri, 22 Jan 2016 17:39:04 -0800 [thread overview]
Message-ID: <1453513144-14135-1-git-send-email-abhay.kumar@intel.com> (raw)
In-Reply-To: <1452650255-11125-1-git-send-email-abhay.kumar@intel.com>
From: Abhay Kumar <abhay.kumar@intel.com>
Make resume/on codepath not to wait for panel_power_cycle_delay(t11_t12)
if this time is already spent in suspend/poweron time.
v2: Use CLOCK_BOOTTIME and remove jiffies for panel power cycle
delay calculation(Ville).
v3: Addressed below comments
1. Tracking time from where last powercycle is initiated.
2. Used ktime_get_bootime() wrapper for boottime clock.
3. Used ktime_ms_delta() to get time difference.
v4: Updated v3 change log in detail.
v5: Removed static from panel_power_on_time(Stéphane).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 19 ++++++++++++++-----
drivers/gpu/drm/i915/intel_drv.h | 2 +-
2 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e2bea710..29f21c1 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1811,12 +1811,21 @@ static void wait_panel_off(struct intel_dp *intel_dp)
static void wait_panel_power_cycle(struct intel_dp *intel_dp)
{
+ ktime_t panel_power_on_time;
+ s64 panel_power_off_duration;
+
DRM_DEBUG_KMS("Wait for panel power cycle\n");
+ /* take the difference of currrent time and panel power off time
+ * and then make panel wait for t11_t12 if needed. */
+ panel_power_on_time = ktime_get_boottime();
+ panel_power_off_duration = ktime_ms_delta(panel_power_on_time, intel_dp->panel_power_off_time);
+
/* When we disable the VDD override bit last we have to do the manual
* wait. */
- wait_remaining_ms_from_jiffies(intel_dp->last_power_cycle,
- intel_dp->panel_power_cycle_delay);
+ if (panel_power_off_duration < (s64)intel_dp->panel_power_cycle_delay)
+ wait_remaining_ms_from_jiffies(jiffies,
+ intel_dp->panel_power_cycle_delay - panel_power_off_duration);
wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE);
}
@@ -1968,7 +1977,7 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp)
I915_READ(pp_stat_reg), I915_READ(pp_ctrl_reg));
if ((pp & POWER_TARGET_ON) == 0)
- intel_dp->last_power_cycle = jiffies;
+ intel_dp->panel_power_off_time = ktime_get_boottime();
power_domain = intel_display_port_aux_power_domain(intel_encoder);
intel_display_power_put(dev_priv, power_domain);
@@ -2117,7 +2126,7 @@ static void edp_panel_off(struct intel_dp *intel_dp)
I915_WRITE(pp_ctrl_reg, pp);
POSTING_READ(pp_ctrl_reg);
- intel_dp->last_power_cycle = jiffies;
+ intel_dp->panel_power_off_time = ktime_get_boottime();
wait_panel_off(intel_dp);
/* We got a reference when we enabled the VDD. */
@@ -5116,7 +5125,7 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
{
- intel_dp->last_power_cycle = jiffies;
+ intel_dp->panel_power_off_time = ktime_get_boottime();
intel_dp->last_power_on = jiffies;
intel_dp->last_backlight_off = jiffies;
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index bc97012..137e40d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -770,9 +770,9 @@ struct intel_dp {
int backlight_off_delay;
struct delayed_work panel_vdd_work;
bool want_panel_vdd;
- unsigned long last_power_cycle;
unsigned long last_power_on;
unsigned long last_backlight_off;
+ ktime_t panel_power_off_time;
struct notifier_block edp_notifier;
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-01-23 1:39 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-13 1:57 [PATCH v4] drm/i915: edp resume/On time optimization abhay.kumar
2016-01-13 8:02 ` Kumar, Shobhit
2016-01-13 10:20 ` ✗ warning: Fi.CI.BAT Patchwork
2016-01-14 23:53 ` [PATCH v4] drm/i915: edp resume/On time optimization Kumar, Abhay
2016-01-19 22:37 ` Kumar, Abhay
2016-01-20 9:00 ` Daniel Vetter
2016-01-20 9:59 ` Kumar, Shobhit
2016-01-20 13:06 ` Ville Syrjälä
2016-01-21 12:17 ` Kumar, Abhay
2016-01-22 5:48 ` Kumar, Shobhit
2016-01-31 7:20 ` Kumar, Abhay
2016-01-23 1:39 ` abhay.kumar [this message]
2016-02-12 1:58 ` [PATCH V5] " Kumar, Abhay
2016-02-12 16:07 ` Daniel Vetter
2016-01-23 8:43 ` ✗ Fi.CI.BAT: failure for drm/i915: edp resume/On time optimization. (rev10) Patchwork
2016-01-26 11:36 ` Ville Syrjälä
2016-01-27 0:21 ` Kumar, Abhay
2016-01-28 12:32 ` ✗ Fi.CI.BAT: warning " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453513144-14135-1-git-send-email-abhay.kumar@intel.com \
--to=abhay.kumar@intel.com \
--cc=Intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).