From: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
To: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
"Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Cc: "Nikula, Jani" <jani.nikula@intel.com>,
"daniel.vetter@ffwll.ch" <daniel.vetter@ffwll.ch>
Subject: Re: [PATCH 3/3] drm/i915: Instrument PSR parameter for debuging with link standby x link off.
Date: Mon, 1 Feb 2016 19:47:38 +0000 [thread overview]
Message-ID: <1454356058.2538.16.camel@intel.com> (raw)
In-Reply-To: <1454352549-2411-4-git-send-email-rodrigo.vivi@intel.com>
Em Seg, 2016-02-01 às 10:49 -0800, Rodrigo Vivi escreveu:
> Unfortunately we don't know all panels and platforms out there and we
> found internal prototypes without VBT proper set but where only
> link in standby worked well.
>
> So, before enable PSR by default let's instrument the PSR parameter
> in a way that we can identify different panels out there that might
> require or work better with link standby mode.
>
> It is also useful to say that for backward compatibility I'm not
> changing the meaning of this flag. So "0" still means disabled
> and "1" means enabled with full support and maximum power savings.
>
> v2: Use positive value instead of negative for different operation
> mode
> as suggested by Daniel.
>
> v3: As Paulo suggested use 2 to force link standby and 3 to force
> link
> fully on. Also split the link_standby introduction in a separated
> patch.
>
> v4: Use DRM_ERROR for link off request on platfors that don't support
> and
> Remove the quirk promisse.
"platforms" and "promise"
For the 3 patches:
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> ---
> drivers/gpu/drm/i915/i915_params.c | 3 ++-
> drivers/gpu/drm/i915/intel_psr.c | 17 +++++++++++++++++
> 2 files changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_params.c
> b/drivers/gpu/drm/i915/i915_params.c
> index 8d90c25..8b9f368 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -127,7 +127,8 @@ MODULE_PARM_DESC(enable_execlists,
> "(-1=auto [default], 0=disabled, 1=enabled)");
>
> module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);
> -MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
> +MODULE_PARM_DESC(enable_psr, "Enable PSR "
> + "(0=disabled [default], 1=enabled - link mode
> chosen per-platform, 2=force link-standby mode, 3=force link-off
> mode)");
>
> module_param_named_unsafe(preliminary_hw_support,
> i915.preliminary_hw_support, int, 0600);
> MODULE_PARM_DESC(preliminary_hw_support,
> diff --git a/drivers/gpu/drm/i915/intel_psr.c
> b/drivers/gpu/drm/i915/intel_psr.c
> index b99a105..4ab7579 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -329,6 +329,12 @@ static bool intel_psr_match_conditions(struct
> intel_dp *intel_dp)
> return false;
> }
>
> + if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) &&
> + !dev_priv->psr.link_standby) {
> + DRM_ERROR("PSR condition failed: Link off requested
> but not supported on this platform\n");
> + return false;
> + }
> +
> if (IS_HASWELL(dev) &&
> I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config-
> >cpu_transcoder)) &
> S3D_ENABLE) {
> @@ -772,6 +778,7 @@ void intel_psr_init(struct drm_device *dev)
> dev_priv->psr_mmio_base = IS_HASWELL(dev_priv) ?
> HSW_EDP_PSR_BASE : BDW_EDP_PSR_BASE;
>
> + /* Set link_standby x link_off defaults */
> if (IS_HASWELL(dev) || IS_BROADWELL(dev))
> /* HSW and BDW require workarounds that we don't
> implement. */
> dev_priv->psr.link_standby = false;
> @@ -782,6 +789,16 @@ void intel_psr_init(struct drm_device *dev)
> /* For new platforms let's respect VBT back again */
> dev_priv->psr.link_standby = dev_priv-
> >vbt.psr.full_link;
>
> + /* Override link_standby x link_off defaults */
> + if (i915.enable_psr == 2 && !dev_priv->psr.link_standby) {
> + DRM_DEBUG_KMS("PSR: Forcing link standby\n");
> + dev_priv->psr.link_standby = true;
> + }
> + if (i915.enable_psr == 3 && dev_priv->psr.link_standby) {
> + DRM_DEBUG_KMS("PSR: Forcing main link off\n");
> + dev_priv->psr.link_standby = false;
> + }
> +
> INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
> mutex_init(&dev_priv->psr.lock);
> }
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-02-01 19:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-01 18:49 [PATCH 0/3] PSR link standby x link force off changes Rodrigo Vivi
2016-02-01 18:49 ` [PATCH 1/3] drm/i915: PSR simplify port and link standby checks Rodrigo Vivi
2016-02-01 18:49 ` [PATCH 2/3] drm/i915: Add PSR main link standby support back Rodrigo Vivi
2016-02-01 18:49 ` [PATCH 3/3] drm/i915: Instrument PSR parameter for debuging with link standby x link off Rodrigo Vivi
2016-02-01 19:47 ` Zanoni, Paulo R [this message]
2016-02-02 7:31 ` ✗ Fi.CI.BAT: failure for PSR link standby x link force off changes Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454356058.2538.16.camel@intel.com \
--to=paulo.r.zanoni@intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).