From: Jani Nikula <jani.nikula@intel.com>
To: Jani Nikula <jani.nikula@intel.com>, intel-gfx@lists.freedesktop.org
Subject: [PATCH v2] drm/i915/dsi: skip gpio element execution when not supported
Date: Thu, 4 Feb 2016 18:52:47 +0200 [thread overview]
Message-ID: <1454604767-2440-1-git-send-email-jani.nikula@intel.com> (raw)
In-Reply-To: <63f60c089d077a02b82e69888f553b3be067f07a.1454582914.git.jani.nikula@intel.com>
Skip v3 gpio element because the support is not there, and skip gpio
element on non-vlv because the sideband code is vlv specific.
v2: the gpio stuff is currently only supported on vlv (Ville)
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 2a33d93486f2 ("drm/i915/bios: add support for MIPI sequence block v3")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index f4d303ee538b..bcc083db7632 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -205,6 +205,9 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ if (dev_priv->vbt.dsi.seq_version >= 3)
+ data++;
+
gpio = *data++;
/* pull up/down */
@@ -215,6 +218,16 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
goto out;
}
+ if (!IS_VALLEYVIEW(dev_priv)) {
+ DRM_DEBUG_KMS("GPIO element not supported on this platform\n");
+ goto out;
+ }
+
+ if (dev_priv->vbt.dsi.seq_version >= 3) {
+ DRM_DEBUG_KMS("GPIO element v3 not supported\n");
+ goto out;
+ }
+
function = gtable[gpio].function_reg;
pad = gtable[gpio].pad_reg;
--
2.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-02-04 16:52 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 10:50 [PATCH 0/8] drm/i915/dsi: i2c/gpio Jani Nikula
2016-02-04 10:50 ` [PATCH 1/8] drm/i915/dsi: defend gpio table against out of bounds access Jani Nikula
2016-02-04 15:40 ` Ville Syrjälä
2016-02-04 10:50 ` [PATCH 2/8] drm/i915/dsi: don't pass arbitrary data to sideband Jani Nikula
2016-02-04 15:41 ` Ville Syrjälä
2016-02-04 16:56 ` Jani Nikula
2016-02-04 10:50 ` [PATCH 3/8] drm/i915: Adding the parsing logic for the i2c element Jani Nikula
2016-02-04 15:28 ` Ville Syrjälä
2016-02-04 16:21 ` Jani Nikula
2016-02-04 16:36 ` Ville Syrjälä
2016-02-15 16:48 ` Daniel Vetter
2016-02-04 10:50 ` [PATCH 4/8] drm/i915/dsi: skip gpio element execution when not supported Jani Nikula
2016-02-04 15:36 ` Ville Syrjälä
2016-02-04 16:52 ` Jani Nikula [this message]
2016-02-04 17:05 ` [PATCH v2] " Ville Syrjälä
2016-02-04 17:10 ` Jani Nikula
2016-02-04 17:12 ` Jani Nikula
2016-02-04 17:18 ` Ville Syrjälä
2016-02-04 17:22 ` Jani Nikula
2016-02-04 17:48 ` Ville Syrjälä
2016-02-04 17:49 ` Ville Syrjälä
2016-02-04 18:39 ` Jani Nikula
2016-02-04 10:50 ` [PATCH 5/8] drm/i915: put the IOSF port defines in numerical order Jani Nikula
2016-02-04 16:05 ` Ville Syrjälä
2016-02-04 10:50 ` [PATCH 6/8] drm/i915/vlv: drop unused vlv_gps_core_read/write functions Jani Nikula
2016-02-04 16:12 ` Ville Syrjälä
2016-02-04 16:57 ` Jani Nikula
2016-02-04 10:50 ` [PATCH 7/8] drm/i915: Extend gpio read/write to other cores Jani Nikula
2016-02-04 15:39 ` Ville Syrjälä
2016-02-04 16:55 ` [PATCH v5] " Jani Nikula
2016-02-04 17:03 ` Ville Syrjälä
2016-02-04 17:14 ` Jani Nikula
2016-02-04 10:50 ` [PATCH 8/8] drm/i915/dsi: Added the generic gpio sequence support and gpio table Jani Nikula
2016-02-04 17:51 ` Ville Syrjälä
2016-02-04 12:46 ` ✓ Fi.CI.BAT: success for drm/i915/dsi: i2c/gpio Patchwork
2016-02-05 7:31 ` ✗ Fi.CI.BAT: failure for drm/i915/dsi: i2c/gpio (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454604767-2440-1-git-send-email-jani.nikula@intel.com \
--to=jani.nikula@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).