[PATCH 06/12] drm/i915/crt: ensure the HW is powered during HW state readout

[Imre Deak <imre.deak@intel.com>]

The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93439
CC: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/intel_crt.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index ad5dfab..e686a91 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -71,22 +71,29 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
 	struct intel_crt *crt = intel_encoder_to_crt(encoder);
 	enum intel_display_power_domain power_domain;
 	u32 tmp;
+	bool ret;
 
 	power_domain = intel_display_port_power_domain(encoder);
-	if (!intel_display_power_is_enabled(dev_priv, power_domain))
+	if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
 		return false;
 
+	ret = false;
+
 	tmp = I915_READ(crt->adpa_reg);
 
 	if (!(tmp & ADPA_DAC_ENABLE))
-		return false;
+		goto out;
 
 	if (HAS_PCH_CPT(dev))
 		*pipe = PORT_TO_PIPE_CPT(tmp);
 	else
 		*pipe = PORT_TO_PIPE(tmp);
 
-	return true;
+	ret = true;
+out:
+	intel_display_power_put(dev_priv, power_domain);
+
+	return ret;
 }
 
 static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
-- 
2.5.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx