intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 08/12] drm/i915: ensure the HW is powered when accessing the CRC HW block
Date: Fri, 12 Feb 2016 18:55:17 +0200	[thread overview]
Message-ID: <1455296121-4742-9-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1455296121-4742-1-git-send-email-imre.deak@intel.com>

The assumption when adding the intel_display_power_is_enabled() checks
was that if it returns success the power can't be turned off afterwards
during the HW access, which is guaranteed by modeset locks. This isn't
always true, so make sure we hold a dedicated reference for the time of
the access.

Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index ec0c2a05e..9e19cf0 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -825,8 +825,11 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
 		}
 
 		for_each_pipe(dev_priv, pipe) {
-			if (!intel_display_power_is_enabled(dev_priv,
-						POWER_DOMAIN_PIPE(pipe))) {
+			enum intel_display_power_domain power_domain;
+
+			power_domain = POWER_DOMAIN_PIPE(pipe);
+			if (!intel_display_power_get_if_enabled(dev_priv,
+								power_domain)) {
 				seq_printf(m, "Pipe %c power disabled\n",
 					   pipe_name(pipe));
 				continue;
@@ -840,6 +843,8 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
 			seq_printf(m, "Pipe %c IER:\t%08x\n",
 				   pipe_name(pipe),
 				   I915_READ(GEN8_DE_PIPE_IER(pipe)));
+
+			intel_display_power_put(dev_priv, power_domain);
 		}
 
 		seq_printf(m, "Display Engine port interrupt mask:\t%08x\n",
@@ -4004,6 +4009,7 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
 	struct intel_pipe_crc *pipe_crc = &dev_priv->pipe_crc[pipe];
 	struct intel_crtc *crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev,
 									pipe));
+	enum intel_display_power_domain power_domain;
 	u32 val = 0; /* shut up gcc */
 	int ret;
 
@@ -4014,7 +4020,8 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
 	if (pipe_crc->source && source)
 		return -EINVAL;
 
-	if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PIPE(pipe))) {
+	power_domain = POWER_DOMAIN_PIPE(pipe);
+	if (!intel_display_power_get_if_enabled(dev_priv, power_domain)) {
 		DRM_DEBUG_KMS("Trying to capture CRC while pipe is off\n");
 		return -EIO;
 	}
@@ -4031,7 +4038,7 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
 		ret = ivb_pipe_crc_ctl_reg(dev, pipe, &source, &val);
 
 	if (ret != 0)
-		return ret;
+		goto out;
 
 	/* none -> real source transition */
 	if (source) {
@@ -4043,8 +4050,10 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
 		entries = kcalloc(INTEL_PIPE_CRC_ENTRIES_NR,
 				  sizeof(pipe_crc->entries[0]),
 				  GFP_KERNEL);
-		if (!entries)
-			return -ENOMEM;
+		if (!entries) {
+			ret = -ENOMEM;
+			goto out;
+		}
 
 		/*
 		 * When IPS gets enabled, the pipe CRC changes. Since IPS gets
@@ -4100,7 +4109,12 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
 		hsw_enable_ips(crtc);
 	}
 
-	return 0;
+	ret = 0;
+
+out:
+	intel_display_power_put(dev_priv, power_domain);
+
+	return ret;
 }
 
 /*
-- 
2.5.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2016-02-12 16:55 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-12 16:55 [PATCH 00/12] drm/i915: add missing display power refs Imre Deak
2016-02-12 16:55 ` [PATCH 01/12] drm/i915: add helper to get a display power ref if it was already enabled Imre Deak
2016-02-15  8:09   ` Joonas Lahtinen
2016-02-15 14:18   ` [PATCH v2 " Imre Deak
2016-02-17 12:17     ` [PATCH v3 " Imre Deak
2016-02-12 16:55 ` [PATCH 02/12] drm/i915: ensure the HW is powered during display pipe HW readout Imre Deak
2016-02-15 13:23   ` Mika Kuoppala
2016-02-12 16:55 ` [PATCH 03/12] drm/i915/ibx: ensure the HW is powered during PLL " Imre Deak
2016-02-15 13:59   ` Mika Kuoppala
2016-02-12 16:55 ` [PATCH 04/12] drm/i915: ensure the HW is powered when disabling VGA Imre Deak
2016-02-12 16:55 ` [PATCH 05/12] drm/i915: ensure the HW is powered during HW access in assert_pipe Imre Deak
2016-02-12 16:55 ` [PATCH 06/12] drm/i915/crt: ensure the HW is powered during HW state readout Imre Deak
2016-02-12 16:55 ` [PATCH 07/12] drm/i915/ddi: " Imre Deak
2016-02-12 16:55 ` Imre Deak [this message]
2016-02-16 16:02   ` [PATCH 08/12] drm/i915: ensure the HW is powered when accessing the CRC HW block Daniel Vetter
2016-02-17 12:20     ` Imre Deak
2016-02-17 16:09       ` Daniel Vetter
2016-02-12 16:55 ` [PATCH 09/12] drm/i915/dp: ensure the HW is powered during HW state readout Imre Deak
2016-02-12 16:55 ` [PATCH 10/12] drm/i915/dsi: " Imre Deak
2016-02-12 16:55 ` [PATCH 11/12] drm/i915/hdmi: " Imre Deak
2016-02-12 16:55 ` [PATCH 12/12] drm/i915/lvds: " Imre Deak
2016-02-16 16:05   ` Daniel Vetter
2016-02-16 16:47     ` Imre Deak
2016-02-16 11:15 ` ✗ Fi.CI.BAT: failure for drm/i915: add missing display power refs (rev2) Patchwork
2016-02-16 14:04 ` [PATCH 00/12] drm/i915: add missing display power refs Mika Kuoppala
2016-02-16 17:35   ` Imre Deak
2016-02-17 12:44 ` ✓ Fi.CI.BAT: success for drm/i915: add missing display power refs (rev3) Patchwork
2016-02-17 14:21   ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455296121-4742-9-git-send-email-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).