[RESEND PATCH 0/5] Use more atomic state in i915.

[RESEND PATCH 0/5] Use more atomic state in i915.

[Maarten Lankhorst]

This is a resend to get the results from CI. The patches have been reviewed.

Maarten Lankhorst (5):
  drm/i915: Use atomic state to obtain load detection crtc, v3.
  drm/i915: Use atomic state for load detect in crt.
  drm/i915: Use atomic state in tv load detection.
  drm/i915: Use correct dpms for intel_enable_crt.
  drm/i915: Use atomic state in intel_fb_initial_config.

 drivers/gpu/drm/i915/intel_crt.c     |  10 ++-
 drivers/gpu/drm/i915/intel_display.c | 132 ++++++++++++++---------------------
 drivers/gpu/drm/i915/intel_drv.h     |   4 +-
 drivers/gpu/drm/i915/intel_fbdev.c   |  17 +++--
 drivers/gpu/drm/i915/intel_tv.c      |  11 ++-
 5 files changed, 73 insertions(+), 101 deletions(-)

-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[RESEND PATCH 1/5] drm/i915: Use atomic state to obtain load detection crtc, v3.

[Maarten Lankhorst]

Instead of restoring dpms and a flag for whether a temp fb is allocated duplicate
an atomic state before the new state is committed, and commit it the old state
in intel_release_load_detect_pipe.

Changes since v1:
- Use a real atomic state. (Ville)
Changes since v2:
- Do not preserve shared_dpll any more, no need to do so. (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 132 ++++++++++++++---------------------
 drivers/gpu/drm/i915/intel_drv.h     |   4 +-
 2 files changed, 54 insertions(+), 82 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index aedddaabc06b..a959f7ca00cb 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10334,6 +10334,7 @@ mode_fits_in_fbdev(struct drm_device *dev,
 	if (obj->base.size < mode->vdisplay * fb->pitches[0])
 		return NULL;
 
+	drm_framebuffer_reference(fb);
 	return fb;
 #else
 	return NULL;
@@ -10389,7 +10390,7 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector,
 	struct drm_device *dev = encoder->dev;
 	struct drm_framebuffer *fb;
 	struct drm_mode_config *config = &dev->mode_config;
-	struct drm_atomic_state *state = NULL;
+	struct drm_atomic_state *state = NULL, *restore_state = NULL;
 	struct drm_connector_state *connector_state;
 	struct intel_crtc_state *crtc_state;
 	int ret, i = -1;
@@ -10398,6 +10399,8 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector,
 		      connector->base.id, connector->name,
 		      encoder->base.id, encoder->name);
 
+	old->restore_state = NULL;
+
 retry:
 	ret = drm_modeset_lock(&config->connection_mutex, ctx);
 	if (ret)
@@ -10414,24 +10417,15 @@ retry:
 	 */
 
 	/* See if we already have a CRTC for this connector */
-	if (encoder->crtc) {
-		crtc = encoder->crtc;
+	if (connector->state->crtc) {
+		crtc = connector->state->crtc;
 
 		ret = drm_modeset_lock(&crtc->mutex, ctx);
 		if (ret)
 			goto fail;
-		ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
-		if (ret)
-			goto fail;
-
-		old->dpms_mode = connector->dpms;
-		old->load_detect_temp = false;
 
 		/* Make sure the crtc and connector are running */
-		if (connector->dpms != DRM_MODE_DPMS_ON)
-			connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
-
-		return true;
+		goto found;
 	}
 
 	/* Find an unused one (if possible) */
@@ -10439,8 +10433,15 @@ retry:
 		i++;
 		if (!(encoder->possible_crtcs & (1 << i)))
 			continue;
-		if (possible_crtc->state->enable)
+
+		ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
+		if (ret)
+			goto fail;
+
+		if (possible_crtc->state->enable) {
+			drm_modeset_unlock(&possible_crtc->mutex);
 			continue;
+		}
 
 		crtc = possible_crtc;
 		break;
@@ -10454,23 +10455,22 @@ retry:
 		goto fail;
 	}
 
-	ret = drm_modeset_lock(&crtc->mutex, ctx);
-	if (ret)
-		goto fail;
+found:
+	intel_crtc = to_intel_crtc(crtc);
+
 	ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
 	if (ret)
 		goto fail;
 
-	intel_crtc = to_intel_crtc(crtc);
-	old->dpms_mode = connector->dpms;
-	old->load_detect_temp = true;
-	old->release_fb = NULL;
-
 	state = drm_atomic_state_alloc(dev);
-	if (!state)
-		return false;
+	restore_state = drm_atomic_state_alloc(dev);
+	if (!state || !restore_state) {
+		ret = -ENOMEM;
+		goto fail;
+	}
 
 	state->acquire_ctx = ctx;
+	restore_state->acquire_ctx = ctx;
 
 	connector_state = drm_atomic_get_connector_state(state, connector);
 	if (IS_ERR(connector_state)) {
@@ -10478,7 +10478,9 @@ retry:
 		goto fail;
 	}
 
-	connector_state->crtc = crtc;
+	ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
+	if (ret)
+		goto fail;
 
 	crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
 	if (IS_ERR(crtc_state)) {
@@ -10502,7 +10504,6 @@ retry:
 	if (fb == NULL) {
 		DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
 		fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
-		old->release_fb = fb;
 	} else
 		DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
 	if (IS_ERR(fb)) {
@@ -10514,15 +10515,28 @@ retry:
 	if (ret)
 		goto fail;
 
-	drm_mode_copy(&crtc_state->base.mode, mode);
+	drm_framebuffer_unreference(fb);
+
+	ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
+	if (ret)
+		goto fail;
+
+	ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
+	if (!ret)
+		ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
+	if (!ret)
+		ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(restore_state, crtc->primary));
+	if (ret) {
+		DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
+		goto fail;
+	}
 
 	if (drm_atomic_commit(state)) {
 		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
-		if (old->release_fb)
-			old->release_fb->funcs->destroy(old->release_fb);
 		goto fail;
 	}
-	crtc->primary->crtc = crtc;
+
+	old->restore_state = restore_state;
 
 	/* let the connector get through one full cycle before testing */
 	intel_wait_for_vblank(dev, intel_crtc->pipe);
@@ -10530,7 +10544,8 @@ retry:
 
 fail:
 	drm_atomic_state_free(state);
-	state = NULL;
+	drm_atomic_state_free(restore_state);
+	restore_state = state = NULL;
 
 	if (ret == -EDEADLK) {
 		drm_modeset_backoff(ctx);
@@ -10544,65 +10559,24 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
 				    struct intel_load_detect_pipe *old,
 				    struct drm_modeset_acquire_ctx *ctx)
 {
-	struct drm_device *dev = connector->dev;
 	struct intel_encoder *intel_encoder =
 		intel_attached_encoder(connector);
 	struct drm_encoder *encoder = &intel_encoder->base;
-	struct drm_crtc *crtc = encoder->crtc;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct drm_atomic_state *state;
-	struct drm_connector_state *connector_state;
-	struct intel_crtc_state *crtc_state;
+	struct drm_atomic_state *state = old->restore_state;
 	int ret;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
 		      connector->base.id, connector->name,
 		      encoder->base.id, encoder->name);
 
-	if (old->load_detect_temp) {
-		state = drm_atomic_state_alloc(dev);
-		if (!state)
-			goto fail;
-
-		state->acquire_ctx = ctx;
-
-		connector_state = drm_atomic_get_connector_state(state, connector);
-		if (IS_ERR(connector_state))
-			goto fail;
-
-		crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
-		if (IS_ERR(crtc_state))
-			goto fail;
-
-		connector_state->crtc = NULL;
-
-		crtc_state->base.enable = crtc_state->base.active = false;
-
-		ret = intel_modeset_setup_plane_state(state, crtc, NULL, NULL,
-						      0, 0);
-		if (ret)
-			goto fail;
-
-		ret = drm_atomic_commit(state);
-		if (ret)
-			goto fail;
-
-		if (old->release_fb) {
-			drm_framebuffer_unregister_private(old->release_fb);
-			drm_framebuffer_unreference(old->release_fb);
-		}
-
+	if (!state)
 		return;
-	}
-
-	/* Switch crtc and encoder back off if necessary */
-	if (old->dpms_mode != DRM_MODE_DPMS_ON)
-		connector->funcs->dpms(connector, old->dpms_mode);
 
-	return;
-fail:
-	DRM_DEBUG_KMS("Couldn't release load detect pipe.\n");
-	drm_atomic_state_free(state);
+	ret = drm_atomic_commit(state);
+	if (ret) {
+		DRM_DEBUG_KMS("Couldn't release load detect pipe: %i\n", ret);
+		drm_atomic_state_free(state);
+	}
 }
 
 static int i9xx_pll_refclk(struct drm_device *dev,
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 3cae3768ea37..3436a040cd92 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -910,9 +910,7 @@ struct intel_unpin_work {
 };
 
 struct intel_load_detect_pipe {
-	struct drm_framebuffer *release_fb;
-	bool load_detect_temp;
-	int dpms_mode;
+	struct drm_atomic_state *restore_state;
 };
 
 static inline struct intel_encoder *
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[RESEND PATCH 2/5] drm/i915: Use atomic state for load detect in crt.

[Maarten Lankhorst]

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_crt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index ad5dfabc452e..1e23e073dee9 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -473,11 +473,10 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
 }
 
 static enum drm_connector_status
-intel_crt_load_detect(struct intel_crt *crt)
+intel_crt_load_detect(struct intel_crt *crt, uint32_t pipe)
 {
 	struct drm_device *dev = crt->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t pipe = to_intel_crtc(crt->base.base.crtc)->pipe;
 	uint32_t save_bclrpat;
 	uint32_t save_vtotal;
 	uint32_t vtotal, vactive;
@@ -646,7 +645,8 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 		if (intel_crt_detect_ddc(connector))
 			status = connector_status_connected;
 		else if (INTEL_INFO(dev)->gen < 4)
-			status = intel_crt_load_detect(crt);
+			status = intel_crt_load_detect(crt,
+				to_intel_crtc(connector->state->crtc)->pipe);
 		else
 			status = connector_status_unknown;
 		intel_release_load_detect_pipe(connector, &tmp, &ctx);
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[RESEND PATCH 3/5] drm/i915: Use atomic state in tv load detection.

[Maarten Lankhorst]

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_tv.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index d21f75bda96e..6745bad5bff0 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1182,10 +1182,9 @@ static int
 intel_tv_detect_type(struct intel_tv *intel_tv,
 		      struct drm_connector *connector)
 {
-	struct drm_encoder *encoder = &intel_tv->base.base;
-	struct drm_crtc *crtc = encoder->crtc;
+	struct drm_crtc *crtc = connector->state->crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct drm_device *dev = encoder->dev;
+	struct drm_device *dev = connector->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 tv_ctl, save_tv_ctl;
 	u32 tv_dac, save_tv_dac;
@@ -1234,8 +1233,7 @@ intel_tv_detect_type(struct intel_tv *intel_tv,
 	I915_WRITE(TV_DAC, tv_dac);
 	POSTING_READ(TV_DAC);
 
-	intel_wait_for_vblank(intel_tv->base.base.dev,
-			      to_intel_crtc(intel_tv->base.base.crtc)->pipe);
+	intel_wait_for_vblank(dev, intel_crtc->pipe);
 
 	type = -1;
 	tv_dac = I915_READ(TV_DAC);
@@ -1265,8 +1263,7 @@ intel_tv_detect_type(struct intel_tv *intel_tv,
 	POSTING_READ(TV_CTL);
 
 	/* For unknown reasons the hw barfs if we don't do this vblank wait. */
-	intel_wait_for_vblank(intel_tv->base.base.dev,
-			      to_intel_crtc(intel_tv->base.base.crtc)->pipe);
+	intel_wait_for_vblank(dev, intel_crtc->pipe);
 
 	/* Restore interrupt config */
 	if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[RESEND PATCH 4/5] drm/i915: Use correct dpms for intel_enable_crt.

[Maarten Lankhorst]

With the conversion to atomic only on/off are still supported.
The rest is mapped to one of those, and when enable is called
DPMS_ON should be true.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_crt.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 1e23e073dee9..ad825427e613 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -206,9 +206,7 @@ static void pch_post_disable_crt(struct intel_encoder *encoder)
 
 static void intel_enable_crt(struct intel_encoder *encoder)
 {
-	struct intel_crt *crt = intel_encoder_to_crt(encoder);
-
-	intel_crt_set_dpms(encoder, crt->connector->base.dpms);
+	intel_crt_set_dpms(encoder, DRM_MODE_DPMS_ON);
 }
 
 static enum drm_mode_status
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[RESEND PATCH 5/5] drm/i915: Use atomic state in intel_fb_initial_config.

[Maarten Lankhorst]

This is another step in removing legacy state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_fbdev.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index 09840f4380f9..97a91e631915 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -406,8 +406,8 @@ retry:
 			continue;
 		}
 
-		encoder = connector->encoder;
-		if (!encoder || WARN_ON(!encoder->crtc)) {
+		encoder = connector->state->best_encoder;
+		if (!encoder || WARN_ON(!connector->state->crtc)) {
 			if (connector->force > DRM_FORCE_OFF)
 				goto bail;
 
@@ -420,7 +420,7 @@ retry:
 
 		num_connectors_enabled++;
 
-		new_crtc = intel_fb_helper_crtc(fb_helper, encoder->crtc);
+		new_crtc = intel_fb_helper_crtc(fb_helper, connector->state->crtc);
 
 		/*
 		 * Make sure we're not trying to drive multiple connectors
@@ -466,17 +466,22 @@ retry:
 			 * usually contains. But since our current
 			 * code puts a mode derived from the post-pfit timings
 			 * into crtc->mode this works out correctly.
+			 *
+			 * This is crtc->mode and not crtc->state->mode for the
+			 * fastboot check to work correctly. crtc_state->mode has
+			 * I915_MODE_FLAG_INHERITED, which we clear to force check
+			 * state.
 			 */
 			DRM_DEBUG_KMS("looking for current mode on connector %s\n",
 				      connector->name);
-			modes[i] = &encoder->crtc->mode;
+			modes[i] = &connector->state->crtc->mode;
 		}
 		crtcs[i] = new_crtc;
 
 		DRM_DEBUG_KMS("connector %s on pipe %c [CRTC:%d]: %dx%d%s\n",
 			      connector->name,
-			      pipe_name(to_intel_crtc(encoder->crtc)->pipe),
-			      encoder->crtc->base.id,
+			      pipe_name(to_intel_crtc(connector->state->crtc)->pipe),
+			      connector->state->crtc->base.id,
 			      modes[i]->hdisplay, modes[i]->vdisplay,
 			      modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" :"");
 
-- 
2.1.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.BAT: warning for Use more atomic state in i915.

[Patchwork]

== Summary ==

Series 3515v1 Use more atomic state in i915.
http://patchwork.freedesktop.org/api/1.0/series/3515/revisions/1/mbox/

Test gem_ringfill:
        Subgroup basic-default-hang:
                incomplete -> PASS       (snb-dellxps)
Test kms_flip:
        Subgroup basic-flip-vs-dpms:
                pass       -> DMESG-WARN (ilk-hp8440p) UNSTABLE
Test kms_force_connector_basic:
        Subgroup force-load-detect:
                fail       -> DMESG-FAIL (ilk-hp8440p)
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-a:
                dmesg-warn -> PASS       (skl-i5k-2)
        Subgroup suspend-read-crc-pipe-c:
                pass       -> DMESG-WARN (skl-i5k-2)
                dmesg-warn -> PASS       (bsw-nuc-2)
Test pm_rpm:
        Subgroup basic-pci-d3-state:
                fail       -> PASS       (bdw-nuci7)
                dmesg-warn -> PASS       (byt-nuc)
        Subgroup basic-rte:
                dmesg-warn -> PASS       (bsw-nuc-2)

bdw-nuci7        total:162  pass:152  dwarn:0   dfail:0   fail:0   skip:10 
bdw-ultra        total:165  pass:152  dwarn:0   dfail:0   fail:0   skip:13 
bsw-nuc-2        total:165  pass:136  dwarn:0   dfail:0   fail:0   skip:29 
byt-nuc          total:165  pass:141  dwarn:0   dfail:0   fail:0   skip:24 
hsw-brixbox      total:165  pass:151  dwarn:0   dfail:0   fail:0   skip:14 
ilk-hp8440p      total:165  pass:115  dwarn:1   dfail:1   fail:0   skip:48 
ivb-t430s        total:165  pass:150  dwarn:0   dfail:0   fail:1   skip:14 
skl-i5k-2        total:165  pass:149  dwarn:1   dfail:0   fail:0   skip:15 
snb-dellxps      total:165  pass:142  dwarn:0   dfail:0   fail:1   skip:22 

Results at /archive/results/CI_IGT_test/Patchwork_1422/

bd0b1a9aa8b7fdb2e06a5cbf1756ef93de2fa3fd drm-intel-nightly: 2016y-02m-16d-17h-53m-05s UTC integration manifest
63594c947569ab29b704e598a04309083e1eb97f drm/i915: Use atomic state in intel_fb_initial_config.
449a002e8dee4e01290e7681139584e28d0c3cc7 drm/i915: Use correct dpms for intel_enable_crt.
e215b05e035b783bfe00165be36a7045fb97e395 drm/i915: Use atomic state in tv load detection.
56c9d06492c8693240dcfdb0f9617fb5f8bb07f2 drm/i915: Use atomic state for load detect in crt.
8489191ff8deab10d5ddbea70cac18c69d019bd8 drm/i915: Use atomic state to obtain load detection crtc, v3.

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx