From: Imre Deak <imre.deak@intel.com>
To: Mika Kuoppala <mika.kuoppala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 4/4] drm/i915/gen9: Write dc state debugmask bits only once
Date: Thu, 18 Feb 2016 17:46:01 +0200 [thread overview]
Message-ID: <1455810361.7638.12.camel@intel.com> (raw)
In-Reply-To: <1455808874-22089-5-git-send-email-mika.kuoppala@intel.com>
On to, 2016-02-18 at 17:21 +0200, Mika Kuoppala wrote:
> DMC debugmask bits should stick so no need to write them
> everytime dc state is changed.
>
> v2: Write after firmware has been successfully loaded (Ville)
>
> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
> ---
> drivers/gpu/drm/i915/intel_csr.c | 8 +++++---
> drivers/gpu/drm/i915/intel_drv.h | 2 +-
> drivers/gpu/drm/i915/intel_runtime_pm.c | 7 ++-----
> 3 files changed, 8 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_csr.c
> b/drivers/gpu/drm/i915/intel_csr.c
> index b453fccfa25d..902054efb902 100644
> --- a/drivers/gpu/drm/i915/intel_csr.c
> +++ b/drivers/gpu/drm/i915/intel_csr.c
> @@ -220,19 +220,19 @@ static const struct stepping_info
> *intel_get_stepping_info(struct drm_device *de
> * Everytime display comes back from low power state this function
> is called to
> * copy the firmware from internal memory to registers.
> */
> -void intel_csr_load_program(struct drm_i915_private *dev_priv)
> +bool intel_csr_load_program(struct drm_i915_private *dev_priv)
> {
> u32 *payload = dev_priv->csr.dmc_payload;
> uint32_t i, fw_size;
>
> if (!IS_GEN9(dev_priv)) {
> DRM_ERROR("No CSR support available for this
> platform\n");
> - return;
> + return false;
> }
>
> if (!dev_priv->csr.dmc_payload) {
> DRM_ERROR("Tried to program CSR with empty
> payload\n");
> - return;
> + return false;
> }
>
> fw_size = dev_priv->csr.dmc_fw_size;
> @@ -245,6 +245,8 @@ void intel_csr_load_program(struct
> drm_i915_private *dev_priv)
> }
>
> dev_priv->csr.dc_state = 0;
> +
> + return true;
> }
>
> static uint32_t *parse_csr_fw(struct drm_i915_private *dev_priv,
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 285b0570be9c..c208ca630e99 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1225,7 +1225,7 @@ u32 skl_plane_ctl_rotation(unsigned int
> rotation);
>
> /* intel_csr.c */
> void intel_csr_ucode_init(struct drm_i915_private *);
> -void intel_csr_load_program(struct drm_i915_private *);
> +bool intel_csr_load_program(struct drm_i915_private *);
> void intel_csr_ucode_fini(struct drm_i915_private *);
>
> /* intel_dp.c */
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
> b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 1b490c7e4020..7f0577ca900e 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -526,9 +526,6 @@ static void gen9_set_dc_state(struct
> drm_i915_private *dev_priv, uint32_t state)
> else if (i915.enable_dc == 1 && state >
> DC_STATE_EN_UPTO_DC5)
> state = DC_STATE_EN_UPTO_DC5;
>
> - if (state & DC_STATE_EN_UPTO_DC5_DC6_MASK)
> - gen9_set_dc_state_debugmask(dev_priv);
> -
> val = I915_READ(DC_STATE_EN);
> DRM_DEBUG_KMS("Setting DC state from %02x to %02x\n",
> val & mask, state);
> @@ -2119,8 +2116,8 @@ static void skl_display_core_init(struct
> drm_i915_private *dev_priv,
>
> skl_init_cdclk(dev_priv);
>
> - if (dev_priv->csr.dmc_payload)
> - intel_csr_load_program(dev_priv);
> + if (dev_priv->csr.dmc_payload &&
> intel_csr_load_program(dev_priv))
> + gen9_set_dc_state_debugmask(dev_priv);
> }
>
> static void skl_display_core_uninit(struct drm_i915_private
> *dev_priv)
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-02-18 15:46 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-18 15:21 [PATCH 0/4] gen9 dmc state harderning Mika Kuoppala
2016-02-18 15:21 ` [PATCH 1/4] drm/i915/gen9: Check for DC state mismatch Mika Kuoppala
2016-02-18 15:21 ` [PATCH 2/4] drm/i915/gen9: Verify and enforce dc6 state writes Mika Kuoppala
2016-02-18 15:42 ` Imre Deak
2016-02-18 15:52 ` Mika Kuoppala
2016-02-18 15:58 ` Mika Kuoppala
2016-02-18 15:21 ` [PATCH 3/4] drm/i915/gen9: Extend dmc debug mask to include cores Mika Kuoppala
2016-02-18 15:34 ` Imre Deak
2016-02-18 23:43 ` Runyan, Arthur J
2016-02-19 10:26 ` Mika Kuoppala
2016-02-19 10:34 ` Imre Deak
2016-02-18 15:21 ` [PATCH 4/4] drm/i915/gen9: Write dc state debugmask bits only once Mika Kuoppala
2016-02-18 15:46 ` Imre Deak [this message]
2016-02-19 11:35 ` ✗ Fi.CI.BAT: failure for gen9 dmc state harderning (rev3) Patchwork
2016-02-22 15:13 ` Imre Deak
2016-02-22 15:26 ` Imre Deak
2016-02-19 13:29 ` ✗ Fi.CI.BAT: failure for gen9 dmc state harderning (rev2) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455810361.7638.12.camel@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=mika.kuoppala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).