intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To: Zhi Wang <zhi.a.wang@intel.com>,
	intel-gfx@lists.freedesktop.org, igvt-g@lists.01.org
Cc: daniel.vetter@ffwll.ch, david.j.cowperthwaite@intel.com,
	zhiyuan.lv@intel.com
Subject: Re: [RFCv2 03/14] drm/i915: Introduce host graphics memory/fence partition for GVT-g
Date: Tue, 23 Feb 2016 15:26:57 +0200	[thread overview]
Message-ID: <1456234017.7789.84.camel@linux.intel.com> (raw)
In-Reply-To: <1456233390.7789.80.camel@linux.intel.com>

On ti, 2016-02-23 at 15:16 +0200, Joonas Lahtinen wrote:
> > 
> > On to, 2016-02-18 at 19:42 +0800, Zhi Wang wrote:
> > From: Bing Niu <bing.niu@intel.com>
> > 
> > This patch introduces host graphics memory/fence partition when GVT-g
> > is enabled.
> > 
> > Under GVT-g, i915 host driver only owned limited graphics resources,
> > others are managed by GVT-g resource allocator and kept for other vGPUs.
> > 
> > v2:
> > - Address all coding-style comments from Joonas previously.
> > - Fix errors and warnning reported by checkpatch.pl. (Joonas)
> > - Move the graphs into the header files. (Daniel)
> > 
> > Signed-off-by: Bing Niu <bing.niu@intel.com>
> > Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
> > ---
> >  drivers/gpu/drm/i915/gvt/gvt.c      |  4 ++++
> >  drivers/gpu/drm/i915/gvt/params.c   | 12 ++++++++++++
> >  drivers/gpu/drm/i915/gvt/params.h   |  3 +++
> >  drivers/gpu/drm/i915/i915_drv.h     | 35 +++++++++++++++++++++++++++++++++++
> >  drivers/gpu/drm/i915/i915_gem.c     |  4 +++-
> >  drivers/gpu/drm/i915/i915_gem_gtt.c |  4 ++--
> >  drivers/gpu/drm/i915/i915_vgpu.c    | 21 +++++++++++++++++----
> >  7 files changed, 76 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/gvt/gvt.c b/drivers/gpu/drm/i915/gvt/gvt.c
> > index 52cfa32..2099b7e 100644
> > --- a/drivers/gpu/drm/i915/gvt/gvt.c
> > +++ b/drivers/gpu/drm/i915/gvt/gvt.c
> > @@ -348,6 +348,10 @@ void *gvt_create_pgt_device(struct drm_i915_private *dev_priv)
> >  		goto err;
> >  	}
> >  
> > +	dev_priv->gvt.host_fence_sz = gvt.host_fence_sz;
> > +	dev_priv->gvt.host_low_gm_sz_in_mb = gvt.host_low_gm_sz;
> > +	dev_priv->gvt.host_high_gm_sz_in_mb = gvt.host_high_gm_sz;
> 
> I'm thinking, could we expose the pgt_device struct (at least
> partially, and then have a PIMPL pattern), to avoid this kind of
> duplication of declarations and unnecessary copies between i915 and
> i915_gvt modules?
> 
> It's little rough that the gvt driver writes to i915_private struct.
> I'd rather see that gvt.host_fence_sz and other variables get sanitized
> and then written to pgt_device (maybe the public part would be
> i915_pgt_device) and used by gvt and i915 code.
> 

Also, using memparse to handle all kernel memory size parameters is a
good idea (see parse_highmem() or related function). That is what users
expect.

> Was this ever considered?
> 

<SNIP>

> > diff --git a/drivers/gpu/drm/i915/i915_vgpu.c b/drivers/gpu/drm/i915/i915_vgpu.c
> > index dea7429..7be1435 100644
> > --- a/drivers/gpu/drm/i915/i915_vgpu.c
> > +++ b/drivers/gpu/drm/i915/i915_vgpu.c
> > @@ -188,10 +188,23 @@ int intel_vgt_balloon(struct drm_device *dev)
> >  	unsigned long unmappable_base, unmappable_size, unmappable_end;
> >  	int ret;
> >  
> > -	mappable_base = I915_READ(vgtif_reg(avail_rs.mappable_gmadr.base));
> > -	mappable_size = I915_READ(vgtif_reg(avail_rs.mappable_gmadr.size));
> > -	unmappable_base = I915_READ(vgtif_reg(avail_rs.nonmappable_gmadr.base));
> > -	unmappable_size = I915_READ(vgtif_reg(avail_rs.nonmappable_gmadr.size));
> > +	if (intel_gvt_active(dev)) {
> > +		mappable_base = 0;
> > +		mappable_size = dev_priv->gvt.host_low_gm_sz_in_mb << 20;
> > +		unmappable_base = dev_priv->gtt.mappable_end;
> > +		unmappable_size = dev_priv->gvt.host_high_gm_sz_in_mb << 20;

This could be avoided too.

> > +	} else if (intel_vgpu_active(dev)) {
> > +		mappable_base = I915_READ(
> > +			vgtif_reg(avail_rs.mappable_gmadr.base));
> > +		mappable_size = I915_READ(
> > +			vgtif_reg(avail_rs.mappable_gmadr.size));
> > +		unmappable_base = I915_READ(
> > +			vgtif_reg(avail_rs.nonmappable_gmadr.base));
> > +		unmappable_size = I915_READ(
> > +			vgtif_reg(avail_rs.nonmappable_gmadr.size));
> > +	} else {
> > +		return -ENODEV;
> > +	}
> >  
> >  	mappable_end = mappable_base + mappable_size;
> >  	unmappable_end = unmappable_base + unmappable_size;
-- 
Joonas Lahtinen
Open Source Technology Center
Intel Corporation
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2016-02-23 13:27 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-18 11:42 [RFCv2 PATCH 00/14] gvt: Hacking i915 for GVT context requirement Zhi Wang
2016-02-18 11:42 ` [RFCv2 01/14] drm/i915: factor out i915_pvinfo.h Zhi Wang
2016-02-22 13:23   ` Joonas Lahtinen
2016-02-23  2:40     ` Zhi Wang
2016-02-18 11:42 ` [RFCv2 02/14] drm/i915/gvt: Introduce the basic architecture of GVT-g Zhi Wang
2016-02-23 12:42   ` Joonas Lahtinen
2016-02-24  7:45     ` Tian, Kevin
2016-02-25 11:24       ` Joonas Lahtinen
2016-02-26  5:58     ` Zhi Wang
2016-02-23 12:53   ` Joonas Lahtinen
2016-02-24  7:50     ` Tian, Kevin
2016-02-24  8:08   ` Tian, Kevin
2016-02-26  5:38     ` Zhi Wang
2016-02-18 11:42 ` [RFCv2 03/14] drm/i915: Introduce host graphics memory/fence partition for GVT-g Zhi Wang
2016-02-23 13:16   ` Joonas Lahtinen
2016-02-23 13:23     ` Zhi Wang
2016-02-24  7:42       ` Tian, Kevin
2016-02-25 13:13         ` Joonas Lahtinen
2016-02-26  5:21         ` Zhi Wang
2016-02-26 13:54           ` Joonas Lahtinen
2016-02-23 13:26     ` Joonas Lahtinen [this message]
2016-02-24  8:22   ` Tian, Kevin
2016-02-26  5:29     ` Zhi Wang
2016-02-18 11:42 ` [RFCv2 04/14] drm/i915: factor out alloc_context_idr() and __i915_gem_create_context() Zhi Wang
2016-02-24  8:27   ` Tian, Kevin
2016-02-18 11:42 ` [RFCv2 05/14] drm/i915: factor out __create_legacy_hw_context() Zhi Wang
2016-02-18 11:42 ` [RFCv2 06/14] drm/i915: let __i915_gem_context_create() takes context creation params Zhi Wang
2016-02-24  8:35   ` Tian, Kevin
2016-02-18 11:42 ` [RFCv2 07/14] drm/i915: factor out __intel_lr_context_deferred_alloc() Zhi Wang
2016-02-24  8:37   ` Tian, Kevin
2016-02-18 11:42 ` [RFCv2 08/14] drm/i915: Support per-PPGTT address space mode Zhi Wang
2016-02-24  8:47   ` Tian, Kevin
2016-02-18 11:42 ` [RFCv2 09/14] drm/i915: generate address mode bit from PPGTT instance Zhi Wang
2016-02-18 11:42 ` [RFCv2 10/14] drm/i915: update PDPs by condition when submit the LRC context Zhi Wang
2016-02-24  8:49   ` Tian, Kevin
2016-02-25 15:02     ` Wang, Zhi A
2016-02-26 13:49       ` Joonas Lahtinen
2016-02-18 11:42 ` [RFCv2 11/14] drm/i915: Introduce execlist context status change notification Zhi Wang
2016-02-18 11:42 ` [RFCv2 12/14] drm/i915: factor out execlists_i915_pick_requests() Zhi Wang
2016-02-18 11:42 ` [RFCv2 13/14] drm/i915: Support context single submission when GVT is active Zhi Wang
2016-02-24  8:52   ` Tian, Kevin
2016-02-18 11:42 ` [RFCv2 14/14] drm/i915: Introduce GVT context creation API Zhi Wang
2016-02-18 12:02 ` ✗ Fi.CI.BAT: failure for gvt: Hacking i915 for GVT context requirement Patchwork
2016-02-24  8:55 ` [RFCv2 PATCH 00/14] " Tian, Kevin
2016-02-24  9:18   ` Wang, Zhi A
2016-02-24  9:38     ` Tian, Kevin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456234017.7789.84.camel@linux.intel.com \
    --to=joonas.lahtinen@linux.intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=david.j.cowperthwaite@intel.com \
    --cc=igvt-g@lists.01.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=zhi.a.wang@intel.com \
    --cc=zhiyuan.lv@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).