[PATCH 3/4] drm/i915/chv: Tune L3 SQC credits based on actual latencies

[Imre Deak <imre.deak@intel.com>]

While browsing BSpec I bumped into a note saying we need to tune these
values based on actual measurements done after initial enabling. I've
checked that it indeed improves things on BXT. I haven't checked this on
CHV, but here it is if someone wants to give it a go.

CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 41 +++++++++++++++++++++++++++++------------
 1 file changed, 29 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index a9b7626..fcfdb7f 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6669,11 +6669,32 @@ static void lpt_suspend_hw(struct drm_device *dev)
 	}
 }
 
+static void gen8_set_l3sqc_credits(struct drm_i915_private *dev_priv,
+				   int general_prio_credits,
+				   int high_prio_credits)
+{
+	u32 misccpctl;
+
+	misccpctl = I915_READ(GEN7_MISCCPCTL);
+	I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
+
+	I915_WRITE(GEN8_L3SQCREG1,
+		   L3_GENERAL_PRIO_CREDITS(general_prio_credits) |
+		   L3_HIGH_PRIO_CREDITS(high_prio_credits));
+
+	/*
+	 * Wait at least 100 clocks before re-enabling clock gating.
+	 * See the definition of L3SQCREG1 in BSpec.
+	 */
+	POSTING_READ(GEN8_L3SQCREG1);
+	udelay(1);
+	I915_WRITE(GEN7_MISCCPCTL, misccpctl);
+}
+
 static void broadwell_init_clock_gating(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum pipe pipe;
-	uint32_t misccpctl;
 
 	ilk_init_lp_watermarks(dev);
 
@@ -6708,17 +6729,7 @@ static void broadwell_init_clock_gating(struct drm_device *dev)
 	 * WaProgramL3SqcReg1Default:bdw
 	 * WaTempDisableDOPClkGating:bdw
 	 */
-	misccpctl = I915_READ(GEN7_MISCCPCTL);
-	I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
-	I915_WRITE(GEN8_L3SQCREG1, L3_GENERAL_PRIO_CREDITS(30) |
-				   L3_HIGH_PRIO_CREDITS(2));
-	/*
-	 * Wait at least 100 clocks before re-enabling clock gating. See
-	 * the definition of L3SQCREG1 in BSpec.
-	 */
-	POSTING_READ(GEN8_L3SQCREG1);
-	udelay(1);
-	I915_WRITE(GEN7_MISCCPCTL, misccpctl);
+	gen8_set_l3sqc_credits(dev_priv, 30, 2);
 
 	/*
 	 * WaGttCachingOffByDefault:bdw
@@ -6989,6 +7000,12 @@ static void cherryview_init_clock_gating(struct drm_device *dev)
 		   GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
 
 	/*
+	 * Adjust credits based on actual latencies, see BSpec LSQC Setting
+	 * Recommendations.
+	 */
+	gen8_set_l3sqc_credits(dev_priv, 38, 2);
+
+	/*
 	 * GTT cache may not work with big pages, so if those
 	 * are ever enabled GTT cache may need to be disabled.
 	 */
-- 
2.5.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx