From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Subject: [PATCH v2 3/4] drm/i915/chv: Tune L3 SQC credits based on actual latencies
Date: Tue, 26 Apr 2016 19:39:33 +0300 [thread overview]
Message-ID: <1461688773-5220-1-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1461587888-5047-3-git-send-email-imre.deak@intel.com>
While browsing BSpec I bumped into a note saying we need to tune these
values based on actual measurements done after initial enabling. I've
checked that it indeed improves things on BXT. I haven't checked this on
CHV, but here it is if someone wants to give it a go.
v2:
- Add note about the discrepancy wrt. to the spec in the formula
calculating the credit encodings. (Mika, Ville)
- Move the WA comment to the new function. (Ville)
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
CC: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
drivers/gpu/drm/i915/intel_pm.c | 47 +++++++++++++++++++++++++++--------------
2 files changed, 37 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0cb2e17..e25e78f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6073,6 +6073,12 @@ enum skl_disp_power_wells {
#define VLV_B0_WA_L3SQCREG1_VALUE 0x00D30000
#define GEN8_L3SQCREG1 _MMIO(0xB100)
+/*
+ * Note that on CHV the following has an off-by-one error wrt. to BSpec.
+ * Using the formula in BSpec leads to a hang, while the formula here works
+ * fine and matches the formulas for all other platforms. A BSpec change
+ * request has been filed to clarify this.
+ */
#define L3_GENERAL_PRIO_CREDITS(x) (((x) >> 1) << 19)
#define L3_HIGH_PRIO_CREDITS(x) (((x) >> 1) << 14)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index a9b7626..b217c44 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6669,11 +6669,38 @@ static void lpt_suspend_hw(struct drm_device *dev)
}
}
+static void gen8_set_l3sqc_credits(struct drm_i915_private *dev_priv,
+ int general_prio_credits,
+ int high_prio_credits)
+{
+ u32 misccpctl;
+
+ /*
+ * WaProgramL3SqcReg1Default:bdw
+ * WaTempDisableDOPClkGating:bdw
+ * For CHV see gfxspecs/Related Documents/Performance Guide/
+ * LSQC Setting Recommendations[CHV,BXT].
+ */
+ misccpctl = I915_READ(GEN7_MISCCPCTL);
+ I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
+
+ I915_WRITE(GEN8_L3SQCREG1,
+ L3_GENERAL_PRIO_CREDITS(general_prio_credits) |
+ L3_HIGH_PRIO_CREDITS(high_prio_credits));
+
+ /*
+ * Wait at least 100 clocks before re-enabling clock gating.
+ * See the definition of L3SQCREG1 in BSpec.
+ */
+ POSTING_READ(GEN8_L3SQCREG1);
+ udelay(1);
+ I915_WRITE(GEN7_MISCCPCTL, misccpctl);
+}
+
static void broadwell_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
- uint32_t misccpctl;
ilk_init_lp_watermarks(dev);
@@ -6704,21 +6731,7 @@ static void broadwell_init_clock_gating(struct drm_device *dev)
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
- /*
- * WaProgramL3SqcReg1Default:bdw
- * WaTempDisableDOPClkGating:bdw
- */
- misccpctl = I915_READ(GEN7_MISCCPCTL);
- I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
- I915_WRITE(GEN8_L3SQCREG1, L3_GENERAL_PRIO_CREDITS(30) |
- L3_HIGH_PRIO_CREDITS(2));
- /*
- * Wait at least 100 clocks before re-enabling clock gating. See
- * the definition of L3SQCREG1 in BSpec.
- */
- POSTING_READ(GEN8_L3SQCREG1);
- udelay(1);
- I915_WRITE(GEN7_MISCCPCTL, misccpctl);
+ gen8_set_l3sqc_credits(dev_priv, 30, 2);
/*
* WaGttCachingOffByDefault:bdw
@@ -6988,6 +7001,8 @@ static void cherryview_init_clock_gating(struct drm_device *dev)
I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
+ gen8_set_l3sqc_credits(dev_priv, 38, 2);
+
/*
* GTT cache may not work with big pages, so if those
* are ever enabled GTT cache may need to be disabled.
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-04-26 16:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-25 12:38 [PATCH 1/4] drm/i915/bdw: Add missing delay during L3 SQC credit programming Imre Deak
2016-04-25 12:38 ` [PATCH 2/4] drm/i915: Clean up L3 SQC register field definitions Imre Deak
2016-04-26 8:11 ` Mika Kuoppala
2016-04-26 9:03 ` Imre Deak
2016-04-26 9:21 ` Imre Deak
2016-04-26 16:55 ` Ville Syrjälä
2016-04-25 12:38 ` [PATCH 3/4] drm/i915/chv: Tune L3 SQC credits based on actual latencies Imre Deak
2016-04-25 13:16 ` Ville Syrjälä
2016-04-26 16:19 ` Ville Syrjälä
2016-04-26 16:39 ` Imre Deak [this message]
2016-04-26 16:51 ` [PATCH v2 " Ville Syrjälä
2016-04-25 12:38 ` [PATCH 4/4] drm/i915/bxt: " Imre Deak
2016-04-26 16:41 ` [PATCH v2 " Imre Deak
2016-04-26 16:53 ` Ville Syrjälä
2016-04-25 14:03 ` ✗ Fi.CI.BAT: failure for series starting with [1/4] drm/i915/bdw: Add missing delay during L3 SQC credit programming Patchwork
2016-04-26 16:55 ` [PATCH 1/4] " Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461688773-5220-1-git-send-email-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=mika.kuoppala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox