public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Subject: [PATCH v2 4/4] drm/i915/bxt: Tune L3 SQC credits based on actual latencies
Date: Tue, 26 Apr 2016 19:41:32 +0300	[thread overview]
Message-ID: <1461688892-5617-1-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1461587888-5047-4-git-send-email-imre.deak@intel.com>

BSpec says we need to fine tune these values, so comply. I checked this
with random GPU benchmarks and it does seem to improve things.

Note that I considered to program this from the ring as part of the
context specific workarounds there, I decided against that for the
following reasons:
- It's not a context specific setting, it's part of whatever (power-)
  context the GPU manages regardless of context scheduling to
  save/restore things across power transitions. So it's enough to
  program it once.
- Atm, we don't apply workarounds for engines other than the render
  engine from the ring (although this could be added if needed).
- The same setting is programmed via MMIO for BDW/CHV/VLV and it
  makes sense to program it the same way on BXT too.

v2:
- Specify the actual WA we're implementing. (Ville)

CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Mika Kuoppala <mika.kuoppala@intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index b217c44..6853bf8 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -76,6 +76,17 @@ static void bxt_init_clock_gating(struct drm_device *dev)
 	if (IS_BXT_REVID(dev_priv, BXT_REVID_B0, REVID_FOREVER))
 		I915_WRITE(GEN9_CLKGATE_DIS_0, I915_READ(GEN9_CLKGATE_DIS_0) |
 			   PWM1_GATING_DIS | PWM2_GATING_DIS);
+
+	/*
+	 * WaProgramL3SqcReg1DefaultForPerf:bxt
+	 * Note that for dynamic reprogramming we'd need to do a stalling flush
+	 * operation, but we can do away with that here, since the GPU is idle
+	 * at this point.
+	 */
+	if (IS_BXT_REVID(dev_priv, BXT_REVID_A1, REVID_FOREVER))
+		I915_WRITE(GEN8_L3SQCREG1,
+			   L3_GENERAL_PRIO_CREDITS(62) |
+			   L3_HIGH_PRIO_CREDITS(2));
 }
 
 static void i915_pineview_get_mem_freq(struct drm_device *dev)
-- 
2.5.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-04-26 16:41 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-25 12:38 [PATCH 1/4] drm/i915/bdw: Add missing delay during L3 SQC credit programming Imre Deak
2016-04-25 12:38 ` [PATCH 2/4] drm/i915: Clean up L3 SQC register field definitions Imre Deak
2016-04-26  8:11   ` Mika Kuoppala
2016-04-26  9:03     ` Imre Deak
2016-04-26  9:21       ` Imre Deak
2016-04-26 16:55   ` Ville Syrjälä
2016-04-25 12:38 ` [PATCH 3/4] drm/i915/chv: Tune L3 SQC credits based on actual latencies Imre Deak
2016-04-25 13:16   ` Ville Syrjälä
2016-04-26 16:19     ` Ville Syrjälä
2016-04-26 16:39   ` [PATCH v2 " Imre Deak
2016-04-26 16:51     ` Ville Syrjälä
2016-04-25 12:38 ` [PATCH 4/4] drm/i915/bxt: " Imre Deak
2016-04-26 16:41   ` Imre Deak [this message]
2016-04-26 16:53     ` [PATCH v2 " Ville Syrjälä
2016-04-25 14:03 ` ✗ Fi.CI.BAT: failure for series starting with [1/4] drm/i915/bdw: Add missing delay during L3 SQC credit programming Patchwork
2016-04-26 16:55 ` [PATCH 1/4] " Ville Syrjälä

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461688892-5617-1-git-send-email-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=mika.kuoppala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox