From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [CI 14/17] drm/i915/gen9: Propagate watermark calculation failures up the call chain
Date: Thu, 12 May 2016 07:06:08 -0700 [thread overview]
Message-ID: <1463061971-19638-15-git-send-email-matthew.d.roper@intel.com> (raw)
In-Reply-To: <1463061971-19638-1-git-send-email-matthew.d.roper@intel.com>
Once we move watermark calculation to the atomic check phase, we'll want
to start rejecting display configurations that exceed out watermark
limits. At the moment we just assume that there's always a valid set of
watermarks, even though this may not actually be true. Let's prepare by
passing return codes up through the call stack in preparation.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 10 ++--
drivers/gpu/drm/i915/intel_pm.c | 90 ++++++++++++++++++++++--------------
2 files changed, 61 insertions(+), 39 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 294358c..33f6c4b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -13310,7 +13310,7 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
* phase. The code here should be run after the per-crtc and per-plane 'check'
* handlers to ensure that all derived state has been updated.
*/
-static void calc_watermark_data(struct drm_atomic_state *state)
+static int calc_watermark_data(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
@@ -13346,7 +13346,9 @@ static void calc_watermark_data(struct drm_atomic_state *state)
/* Is there platform-specific watermark information to calculate? */
if (dev_priv->display.compute_global_watermarks)
- dev_priv->display.compute_global_watermarks(state);
+ return dev_priv->display.compute_global_watermarks(state);
+
+ return 0;
}
/**
@@ -13433,9 +13435,7 @@ static int intel_atomic_check(struct drm_device *dev,
return ret;
intel_fbc_choose_crtc(dev_priv, state);
- calc_watermark_data(state);
-
- return 0;
+ return calc_watermark_data(state);
}
static int intel_atomic_prepare_commit(struct drm_device *dev,
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 14c2c3e..1d8407a 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3238,13 +3238,14 @@ static bool skl_ddb_allocation_changed(const struct skl_ddb_allocation *new_ddb,
return false;
}
-static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
- struct intel_crtc_state *cstate,
- struct intel_plane_state *intel_pstate,
- uint16_t ddb_allocation,
- int level,
- uint16_t *out_blocks, /* out */
- uint8_t *out_lines /* out */)
+static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
+ struct intel_crtc_state *cstate,
+ struct intel_plane_state *intel_pstate,
+ uint16_t ddb_allocation,
+ int level,
+ uint16_t *out_blocks, /* out */
+ uint8_t *out_lines, /* out */
+ bool *enabled /* out */)
{
struct drm_plane_state *pstate = &intel_pstate->base;
struct drm_framebuffer *fb = pstate->fb;
@@ -3256,8 +3257,10 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
uint8_t cpp;
uint32_t width = 0, height = 0;
- if (latency == 0 || !cstate->base.active || !intel_pstate->visible)
- return false;
+ if (latency == 0 || !cstate->base.active || !intel_pstate->visible) {
+ *enabled = false;
+ return 0;
+ }
width = drm_rect_width(&intel_pstate->src) >> 16;
height = drm_rect_height(&intel_pstate->src) >> 16;
@@ -3318,13 +3321,16 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
res_blocks++;
}
- if (res_blocks >= ddb_allocation || res_lines > 31)
- return false;
+ if (res_blocks >= ddb_allocation || res_lines > 31) {
+ *enabled = false;
+ return 0;
+ }
*out_blocks = res_blocks;
*out_lines = res_lines;
+ *enabled = true;
- return true;
+ return 0;
}
static int
@@ -3342,6 +3348,7 @@ skl_compute_wm_level(const struct drm_i915_private *dev_priv,
struct intel_plane_state *intel_pstate;
uint16_t ddb_blocks;
enum pipe pipe = intel_crtc->pipe;
+ int ret;
/*
* We'll only calculate watermarks for planes that are actually
@@ -3379,13 +3386,16 @@ skl_compute_wm_level(const struct drm_i915_private *dev_priv,
ddb_blocks = skl_ddb_entry_size(&ddb->plane[pipe][i]);
- result->plane_en[i] = skl_compute_plane_wm(dev_priv,
- cstate,
- intel_pstate,
- ddb_blocks,
- level,
- &result->plane_res_b[i],
- &result->plane_res_l[i]);
+ ret = skl_compute_plane_wm(dev_priv,
+ cstate,
+ intel_pstate,
+ ddb_blocks,
+ level,
+ &result->plane_res_b[i],
+ &result->plane_res_l[i],
+ &result->plane_en[i]);
+ if (ret)
+ return ret;
}
return 0;
@@ -3422,21 +3432,26 @@ static void skl_compute_transition_wm(struct intel_crtc_state *cstate,
}
}
-static void skl_build_pipe_wm(struct intel_crtc_state *cstate,
- struct skl_ddb_allocation *ddb,
- struct skl_pipe_wm *pipe_wm)
+static int skl_build_pipe_wm(struct intel_crtc_state *cstate,
+ struct skl_ddb_allocation *ddb,
+ struct skl_pipe_wm *pipe_wm)
{
struct drm_device *dev = cstate->base.crtc->dev;
const struct drm_i915_private *dev_priv = dev->dev_private;
int level, max_level = ilk_wm_max_level(dev);
+ int ret;
for (level = 0; level <= max_level; level++) {
- skl_compute_wm_level(dev_priv, ddb, cstate,
- level, &pipe_wm->wm[level]);
+ ret = skl_compute_wm_level(dev_priv, ddb, cstate,
+ level, &pipe_wm->wm[level]);
+ if (ret)
+ return ret;
}
pipe_wm->linetime = skl_compute_linetime_wm(cstate);
skl_compute_transition_wm(cstate, &pipe_wm->trans_wm);
+
+ return 0;
}
static void skl_compute_wm_results(struct drm_device *dev,
@@ -3683,21 +3698,27 @@ static void skl_flush_wm_values(struct drm_i915_private *dev_priv,
}
}
-static bool skl_update_pipe_wm(struct drm_crtc_state *cstate,
- struct skl_ddb_allocation *ddb, /* out */
- struct skl_pipe_wm *pipe_wm /* out */)
+static int skl_update_pipe_wm(struct drm_crtc_state *cstate,
+ struct skl_ddb_allocation *ddb, /* out */
+ struct skl_pipe_wm *pipe_wm, /* out */
+ bool *changed /* out */)
{
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->crtc);
struct intel_crtc_state *intel_cstate = to_intel_crtc_state(cstate);
+ int ret;
- skl_build_pipe_wm(intel_cstate, ddb, pipe_wm);
+ ret = skl_build_pipe_wm(intel_cstate, ddb, pipe_wm);
+ if (ret)
+ return ret;
if (!memcmp(&intel_crtc->wm.active.skl, pipe_wm, sizeof(*pipe_wm)))
- return false;
+ *changed = false;
+ else
+ *changed = true;
intel_crtc->wm.active.skl = *pipe_wm;
- return true;
+ return 0;
}
static void skl_update_other_pipe_wm(struct drm_device *dev,
@@ -3730,8 +3751,8 @@ static void skl_update_other_pipe_wm(struct drm_device *dev,
if (!intel_crtc->active)
continue;
- wm_changed = skl_update_pipe_wm(intel_crtc->base.state,
- &r->ddb, &pipe_wm);
+ skl_update_pipe_wm(intel_crtc->base.state,
+ &r->ddb, &pipe_wm, &wm_changed);
/*
* If we end up re-computing the other pipe WM values, it's
@@ -3841,14 +3862,15 @@ static void skl_update_wm(struct drm_crtc *crtc)
struct skl_wm_values *results = &dev_priv->wm.skl_results;
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
struct skl_pipe_wm *pipe_wm = &cstate->wm.skl.optimal;
-
+ bool wm_changed;
/* Clear all dirty flags */
results->dirty_pipes = 0;
skl_clear_wm(results, intel_crtc->pipe);
- if (!skl_update_pipe_wm(crtc->state, &results->ddb, pipe_wm))
+ skl_update_pipe_wm(crtc->state, &results->ddb, pipe_wm, &wm_changed);
+ if (!wm_changed)
return;
skl_compute_wm_results(dev, pipe_wm, results, intel_crtc);
--
2.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-05-12 14:07 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-12 14:05 [CI 00/17] Pre-calculate SKL-style atomic watermarks (final CI run) Matt Roper
2016-05-12 14:05 ` [CI 01/17] drm/i915: Reorganize WM structs/unions in CRTC state Matt Roper
2016-05-12 14:05 ` [CI 02/17] drm/i915: Rename s/skl_compute_pipe_wm/skl_build_pipe_wm/ Matt Roper
2016-05-12 14:05 ` [CI 03/17] drm/i915/gen9: Cache plane data rates in CRTC state Matt Roper
2016-05-12 14:05 ` [CI 04/17] drm/i915/gen9: Allow calculation of data rate for in-flight state (v2) Matt Roper
2016-05-12 14:05 ` [CI 05/17] drm/i915/gen9: Store plane minimum blocks in CRTC wm " Matt Roper
2016-05-12 14:06 ` [CI 06/17] drm/i915: Track whether an atomic transaction changes the active CRTC's Matt Roper
2016-05-12 14:06 ` [CI 07/17] drm/i915/gen9: Allow skl_allocate_pipe_ddb() to operate on in-flight state (v3) Matt Roper
2016-05-12 14:06 ` [CI 08/17] drm/i915: Add distrust_bios_wm flag to dev_priv (v2) Matt Roper
2016-05-12 14:06 ` [CI 09/17] drm/i915/gen9: Compute DDB allocation at atomic check time (v4) Matt Roper
2016-05-12 14:06 ` [CI 10/17] drm/i915/gen9: Drop re-allocation of DDB at atomic commit (v2) Matt Roper
2016-05-12 14:06 ` [CI 11/17] drm/i915/gen9: Calculate plane WM's from state Matt Roper
2016-05-12 14:06 ` [CI 12/17] drm/i915/gen9: Allow watermark calculation on in-flight atomic state (v3) Matt Roper
2016-05-12 14:06 ` [CI 13/17] drm/i915/gen9: Use a bitmask to track dirty pipe watermarks Matt Roper
2016-05-12 14:06 ` Matt Roper [this message]
2016-05-12 14:06 ` [CI 15/17] drm/i915/gen9: Calculate watermarks during atomic 'check' Matt Roper
2016-05-12 22:11 ` [CI 15/17] drm/i915/gen9: Calculate watermarks during atomic 'check' (v2) Matt Roper
2016-05-12 14:06 ` [CI 16/17] drm/i915/gen9: Reject display updates that exceed wm limitations (v2) Matt Roper
2016-05-12 14:06 ` [CI 17/17] drm/i915: Remove wm_config from dev_priv/intel_atomic_state Matt Roper
2016-05-12 15:57 ` ✗ Ro.CI.BAT: failure for Pre-calculate SKL-style atomic watermarks (final CI run) Patchwork
2016-05-12 22:52 ` ✓ Ro.CI.BAT: success for Pre-calculate SKL-style atomic watermarks (final CI run) (rev2) Patchwork
2016-05-13 14:44 ` Matt Roper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463061971-19638-15-git-send-email-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox