public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Dave Gordon <david.s.gordon@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 2/3] drm/i915/guc: disable GuC submission earlier during GuC (re)load
Date: Tue,  7 Jun 2016 09:14:50 +0100	[thread overview]
Message-ID: <1465287291-2187-2-git-send-email-david.s.gordon@intel.com> (raw)
In-Reply-To: <1465287291-2187-1-git-send-email-david.s.gordon@intel.com>

When resetting and reloading the GuC, the GuC submission management code
also needs to destroy and recreate the GuC client(s). Currently this is
done by a separate call from the GuC loader, but really, it's just an
internal detail of the submission code. So here we remove the call from
the loader (which is too late, really, because the GuC has already been
reloaded at this point) and put it into guc_submission_init() instead.
This means that any preexisting client is destroyed *before* the GuC
(re)load and then recreated after, iff the firmware was successfully
loaded. If the GuC reload fails, we don't recreate the client, so
fallback to execlists mode (if active) won't leak the client object
(previously, the now-unusable client would have been left allocated,
and leaked if the driver were unloaded).

Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
---
 drivers/gpu/drm/i915/i915_guc_submission.c | 15 ++++++++++-----
 drivers/gpu/drm/i915/intel_guc_loader.c    |  3 ---
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
index ac72451..2db1182 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -657,6 +657,8 @@ static void guc_client_free(struct drm_device *dev,
 	 */
 
 	if (client->client_base) {
+		uint16_t db_id = client->doorbell_id;
+
 		/*
 		 * If we got as far as setting up a doorbell, make sure
 		 * we shut it down before unmapping & deallocating the
@@ -664,10 +666,11 @@ static void guc_client_free(struct drm_device *dev,
 		 * GuC that we've finished with it, finally deallocate
 		 * it in our bitmap
 		 */
-		if (client->doorbell_id != GUC_INVALID_DOORBELL_ID) {
+		if (db_id != GUC_INVALID_DOORBELL_ID) {
 			guc_disable_doorbell(guc, client);
-			host2guc_release_doorbell(guc, client);
-			release_doorbell(guc, client->doorbell_id);
+			if (test_bit(db_id, guc->doorbell_bitmap))
+				host2guc_release_doorbell(guc, client);
+			release_doorbell(guc, db_id);
 		}
 
 		kunmap(kmap_to_page(client->client_base));
@@ -912,6 +915,10 @@ int i915_guc_submission_init(struct drm_device *dev)
 	const size_t gemsize = round_up(poolsize, PAGE_SIZE);
 	struct intel_guc *guc = &dev_priv->guc;
 
+	/* Wipe bitmap & delete client in case of reinitialisation */
+	bitmap_clear(guc->doorbell_bitmap, 0, GUC_MAX_DOORBELLS);
+	i915_guc_submission_disable(dev);
+
 	if (!i915.enable_guc_submission)
 		return 0; /* not enabled  */
 
@@ -923,9 +930,7 @@ int i915_guc_submission_init(struct drm_device *dev)
 		return -ENOMEM;
 
 	ida_init(&guc->ctx_ids);
-
 	guc_create_log(guc);
-
 	guc_create_ads(guc);
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index 4e34c2e..41f7c7d 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -492,9 +492,6 @@ int intel_guc_setup(struct drm_device *dev)
 		intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));
 
 	if (i915.enable_guc_submission) {
-		/* The execbuf_client will be recreated. Release it first. */
-		i915_guc_submission_disable(dev);
-
 		err = i915_guc_submission_enable(dev);
 		if (err)
 			goto fail;
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-06-07  8:15 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-07  8:14 [PATCH 1/3] drm/i915/guc: fix GuC loading/submission check Dave Gordon
2016-06-07  8:14 ` Dave Gordon [this message]
2016-06-07  9:51   ` [PATCH 2/3] drm/i915/guc: disable GuC submission earlier during GuC (re)load Tvrtko Ursulin
2016-06-07 10:13     ` Dave Gordon
2016-06-07  8:14 ` [PATCH 3/3] drm/i915/guc: enable GuC loading & submission by default Dave Gordon
2016-06-07  9:53   ` Tvrtko Ursulin
2016-06-07  8:41 ` [PATCH 1/3] drm/i915/guc: fix GuC loading/submission check Tvrtko Ursulin
2016-06-09 11:04   ` Tvrtko Ursulin
2016-06-10 15:45     ` Dave Gordon
2016-06-10 16:21     ` [PATCH] drm/i915/guc: suppress GuC-related message on non-GuC platforms Dave Gordon
2016-06-13  9:00       ` Tvrtko Ursulin
2016-06-07  8:43 ` ✗ Ro.CI.BAT: failure for series starting with [1/3] drm/i915/guc: fix GuC loading/submission check Patchwork
2016-06-07 10:54   ` Dave Gordon
2016-06-07 13:23     ` Tvrtko Ursulin
2016-06-07 20:00       ` Chris Wilson
2016-06-08  8:18         ` Dave Gordon
2016-06-10 16:59 ` ✗ Ro.CI.BAT: failure for series starting with drm/i915/guc: suppress GuC-related message on non-GuC platforms (rev2) Patchwork
2016-06-10 18:14   ` Dave Gordon
2016-06-13  9:06     ` Tvrtko Ursulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465287291-2187-2-git-send-email-david.s.gordon@intel.com \
    --to=david.s.gordon@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox