From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v3 3/3] drm/i915: Group all the PPS init steps to one place
Date: Tue, 21 Jun 2016 11:51:49 +0300 [thread overview]
Message-ID: <1466499109-20240-4-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1466499109-20240-1-git-send-email-imre.deak@intel.com>
Move the early PPS initialization calls next to the rest of PPS
initialization steps. This allows us to forgo a duplicated call to
intel_dp_init_panel_power_sequencer_registers() on VLV/CHV.
This will swap the order of DP AUX registration wrt. PPS initialization.
There is an existing race here in case of a user space access via the
DPAUX device node after DP AUX registration and before calling
intel_dp_init_panel_power_sequencer_registers(), but this change won't
make this worse. The fix for this is to separate DP AUX initialization
and registration, that's a separate work already underway.
The order of MST wrt. PPS init as well as the order of
intel_dp_init_panel_power_sequencer_registers() wrt.
intel_edp_panel_vdd_sanitize() also swap, which is ok, there are no
dependencies between these steps.
Suggested by Ville.
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 46 +++++++++++++++++++++--------------------
1 file changed, 24 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 277b74a..d15604d2 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5332,8 +5332,18 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
}
pps_lock(intel_dp);
+
+ intel_dp_init_panel_power_timestamps(intel_dp);
+
+ if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
+ vlv_initial_power_sequencer_setup(intel_dp);
+ } else {
+ intel_dp_init_panel_power_sequencer(dev, intel_dp);
+ intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
+ }
+
intel_edp_panel_vdd_sanitize(intel_dp);
- intel_dp_init_panel_power_sequencer_registers(dev, intel_dp);
+
pps_unlock(intel_dp);
/* Cache DPCD and EDID for edp. */
@@ -5347,7 +5357,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
} else {
/* if this fails, presume the device is a ghost */
DRM_INFO("failed to retrieve link info, disabling eDP\n");
- return false;
+ goto out_vdd_off;
}
mutex_lock(&dev->mode_config.mutex);
@@ -5417,6 +5427,18 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
intel_panel_setup_backlight(connector, pipe);
return true;
+
+out_vdd_off:
+ cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
+ /*
+ * vdd might still be enabled do to the delayed vdd off.
+ * Make sure vdd is actually turned off here.
+ */
+ pps_lock(intel_dp);
+ edp_panel_vdd_off_sync(intel_dp);
+ pps_unlock(intel_dp);
+
+ return false;
}
bool
@@ -5522,16 +5544,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
BUG();
}
- if (is_edp(intel_dp)) {
- pps_lock(intel_dp);
- intel_dp_init_panel_power_timestamps(intel_dp);
- if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
- vlv_initial_power_sequencer_setup(intel_dp);
- else
- intel_dp_init_panel_power_sequencer(dev, intel_dp);
- pps_unlock(intel_dp);
- }
-
ret = intel_dp_aux_init(intel_dp, intel_connector);
if (ret)
goto fail;
@@ -5564,16 +5576,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
return true;
fail:
- if (is_edp(intel_dp)) {
- cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
- /*
- * vdd might still be enabled do to the delayed vdd off.
- * Make sure vdd is actually turned off here.
- */
- pps_lock(intel_dp);
- edp_panel_vdd_off_sync(intel_dp);
- pps_unlock(intel_dp);
- }
drm_connector_unregister(connector);
drm_connector_cleanup(connector);
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-06-21 8:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-21 8:51 [PATCH v3 0/3] drm/i915: Fix power sequencer use before init Imre Deak
2016-06-21 8:51 ` [PATCH v3 1/3] drm/i915/ibx, cpt: Don't attempt to register eDP if LVDS was detected Imre Deak
2016-06-22 12:26 ` Ville Syrjälä
2016-06-22 13:25 ` Imre Deak
2016-06-21 8:51 ` [PATCH v3 2/3] drm/i915: Initialize the PPS HW before its first use Imre Deak
2016-06-22 12:27 ` Ville Syrjälä
2016-06-21 8:51 ` Imre Deak [this message]
2016-06-22 12:30 ` [PATCH v3 3/3] drm/i915: Group all the PPS init steps to one place Ville Syrjälä
2016-06-21 9:45 ` ✗ Ro.CI.BAT: warning for drm/i915: Fix power sequencer use before init Patchwork
2016-06-21 12:59 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466499109-20240-4-git-send-email-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox