From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
Date: Thu, 7 Jul 2016 11:37:23 -0700 [thread overview]
Message-ID: <1467916643-16574-1-git-send-email-matthew.d.roper@intel.com> (raw)
When we write watermark values to the hardware, those values are stored
in dev_priv->wm.skl_hw. However with recent watermark changes, the
results structure we're copying from only contains valid watermark and
DDB values for the pipes that are actually changing; the values for
other pipes remain 0. Thus a blind copy of the entire skl_wm_values
structure will clobber the values for unchanged pipes...we need to be
more selective and only copy over the values for the changing pipes.
This mistake was hidden until recently due to another bug that caused us
to erroneously re-calculate watermarks for all active pipes rather than
changing pipes. Only when that bug was fixed was the impact of this bug
discovered (e.g., modesets failing with "Requested display configuration
exceeds system watermark limitations" messages and leaving watermarks
non-functional, even ones initiated by intel_fbdev_restore_mode).
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude Paul <cpaul@redhat.com>
Fixes: 734fa01f3a17 ("drm/i915/gen9: Calculate watermarks during atomic 'check' (v2)")
Fixes: 9b6130227495 ("drm/i915/gen9: Re-allocate DDB only for changed pipes")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 5a8ee0c..2913535 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4018,8 +4018,10 @@ static void skl_update_wm(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct skl_wm_values *results = &dev_priv->wm.skl_results;
+ struct skl_wm_values *hw_vals = &dev_priv->wm.skl_hw;
struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
struct skl_pipe_wm *pipe_wm = &cstate->wm.skl.optimal;
+ int pipe;
if ((results->dirty_pipes & drm_crtc_mask(crtc)) == 0)
return;
@@ -4031,8 +4033,24 @@ static void skl_update_wm(struct drm_crtc *crtc)
skl_write_wm_values(dev_priv, results);
skl_flush_wm_values(dev_priv, results);
- /* store the new configuration */
- dev_priv->wm.skl_hw = *results;
+ /*
+ * Store the new configuration (but only for the pipes that have
+ * changed; the other values weren't recomputed).
+ */
+ for_each_pipe_masked(dev_priv, pipe, results->dirty_pipes) {
+ hw_vals->wm_linetime[pipe] = results->wm_linetime[pipe];
+ hw_vals->ddb.pipe[pipe] = results->ddb.pipe[pipe];
+ memcpy(&hw_vals->ddb.plane[pipe], &results->ddb.plane[pipe],
+ sizeof(hw_vals->ddb.plane[pipe]));
+ memcpy(&hw_vals->ddb.y_plane[pipe], &results->ddb.y_plane[pipe],
+ sizeof(hw_vals->ddb.y_plane[pipe]));
+ memcpy(&hw_vals->plane[pipe],
+ &results->plane[pipe],
+ sizeof(results->plane[pipe]));
+ memcpy(&hw_vals->plane_trans[pipe],
+ &results->plane_trans[pipe],
+ sizeof(results->plane_trans[pipe]));
+ }
mutex_unlock(&dev_priv->wm.wm_mutex);
}
--
2.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2016-07-07 18:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-07 18:37 Matt Roper [this message]
2016-07-08 5:52 ` ✗ Ro.CI.BAT: warning for drm/i915/gen9: Only copy WM results for changed pipes to skl_hw Patchwork
2016-07-11 22:04 ` [PATCH] " Lyude Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467916643-16574-1-git-send-email-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox