From: Peter Antoine <peter.antoine@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [I-G-T] igt/gem_mocs_settings: improve RC6 testings
Date: Tue, 19 Jul 2016 11:25:29 +0100 [thread overview]
Message-ID: <1468923929-22731-1-git-send-email-peter.antoine@intel.com> (raw)
On some platforms the MOCS values are not always saved and restored
on RC6 enter/exit. The rational is that the context with restore
these values. On these platforms the test will fail as it tests the
values by directly reading the MOCS registers.
So this change removes the direct testing of the values and adds a
test that specifically waits for the GPU to enter and then leave
RC6 and then tests the MOCS values.
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
---
tests/gem_mocs_settings.c | 136 ++++++++++++++++++++++------------------------
1 file changed, 64 insertions(+), 72 deletions(-)
diff --git a/tests/gem_mocs_settings.c b/tests/gem_mocs_settings.c
index bc553e9..e85dcda 100644
--- a/tests/gem_mocs_settings.c
+++ b/tests/gem_mocs_settings.c
@@ -132,65 +132,6 @@ static uint32_t get_engine_base(uint32_t engine)
}
}
-static uint32_t get_mocs_register_value(int fd, uint64_t offset, uint32_t index)
-{
- igt_assert(index < MAX_NUMBER_MOCS_REGISTERS);
- return intel_register_read(offset + index * 4);
-}
-
-static void test_mocs_control_values(int fd, uint32_t engine)
-{
- const uint32_t engine_base = get_engine_base(engine);
- struct mocs_table table;
- int local_fd;
- int i;
-
- local_fd = fd;
- if (local_fd == -1)
- local_fd = drm_open_driver_master(DRIVER_INTEL);
-
- igt_assert(get_mocs_settings(local_fd, &table, false));
-
- for (i = 0; i < table.size; i++)
- igt_assert_eq_u32(get_mocs_register_value(local_fd,
- engine_base, i),
- table.table[i].control_value);
-
- if (local_fd != fd)
- close(local_fd);
-}
-
-static void test_mocs_l3cc_values(int fd)
-{
- uint32_t reg_values[MAX_NUMBER_MOCS_REGISTERS/2];
- struct mocs_table table;
- int local_fd;
- int i;
-
- local_fd = fd;
- if (local_fd == -1)
- local_fd = drm_open_driver_master(DRIVER_INTEL);
-
- for (i = 0; i < MAX_NUMBER_MOCS_REGISTERS / 2; i++)
- reg_values[i] = intel_register_read(GEN9_LNCFCMOCS0 + (i * 4));
-
- igt_assert(get_mocs_settings(local_fd, &table, false));
-
- for (i = 0; i < table.size / 2; i++) {
- igt_assert_eq_u32((reg_values[i] & 0xffff),
- table.table[i * 2].l3cc_value);
- igt_assert_eq_u32((reg_values[i] >> 16),
- table.table[i * 2 + 1].l3cc_value);
- }
-
- if (table.size & 1)
- igt_assert_eq_u32((reg_values[i] & 0xffff),
- table.table[i * 2].l3cc_value);
-
- if (local_fd != fd)
- close(local_fd);
-}
-
#define MI_STORE_REGISTER_MEM_64_BIT_ADDR ((0x24 << 23) | 2)
static int create_read_batch(struct drm_i915_gem_relocation_entry *reloc,
@@ -428,11 +369,8 @@ static void test_mocs_values(int fd)
continue;
igt_debug("Testing %s\n", e->name);
- test_mocs_control_values(fd, engine);
test_context_mocs_values(fd, engine);
}
-
- test_mocs_l3cc_values(fd);
}
static void default_context_tests(unsigned mode)
@@ -566,12 +504,73 @@ static void context_dirty_test(unsigned mode)
static void run_tests(unsigned mode)
{
+ struct pci_device *pci_dev;
+
+ pci_dev = intel_get_pci_device();
+ igt_require(pci_dev);
+ intel_register_access_init(pci_dev, 0);
+
default_context_tests(mode);
default_dirty_tests(mode);
context_save_restore_test(mode);
context_dirty_test(mode);
+
+ intel_register_access_fini();
+}
+
+static unsigned int readit(const char *path)
+{
+ unsigned int ret = 0;
+ int scanned = 0;
+ FILE *file;
+
+ file = fopen(path, "r");
+ igt_assert(file);
+ scanned = fscanf(file, "%u", &ret);
+ igt_assert_eq(scanned, 1);
+
+ fclose(file);
+
+ return ret;
+}
+
+static int read_rc6_residency(void)
+{
+ unsigned int residency;
+ const int device = drm_get_card();
+ static const char path_format[] =
+ "/sys/class/drm/card%d/power/rc6_residency_ms";
+ char path[sizeof(path_format)];
+ int ret;
+
+ ret = snprintf(path, sizeof(path)-1, path_format, device);
+
+ igt_assert_neq(ret, -1);
+ residency = readit(path);
+
+ return residency;
+}
+
+static void context_rc6_test(void)
+{
+ int fd = drm_open_driver(DRIVER_INTEL);
+ int res_ms;
+ uint32_t ctx_id = gem_context_create(fd);
+
+ igt_debug("RC6 Context Test\n");
+ check_control_registers(fd, I915_EXEC_RENDER, ctx_id, false);
+ check_l3cc_registers(fd, I915_EXEC_RENDER, ctx_id, false);
+
+ res_ms = read_rc6_residency();
+ sleep(3);
+ igt_assert_neq(res_ms, read_rc6_residency());
+
+ check_control_registers(fd, I915_EXEC_RENDER, ctx_id, false);
+ check_l3cc_registers(fd, I915_EXEC_RENDER, ctx_id, false);
+ close(fd);
}
+
static void test_requirements(void)
{
int fd = drm_open_driver_master(DRIVER_INTEL);
@@ -584,19 +583,16 @@ static void test_requirements(void)
igt_main
{
- struct pci_device *pci_dev;
-
igt_fixture {
test_requirements();
-
- pci_dev = intel_get_pci_device();
- igt_require(pci_dev);
- intel_register_access_init(pci_dev, 0);
}
igt_subtest("mocs-settings")
run_tests(NONE);
+ igt_subtest("mocs-rc6")
+ context_rc6_test();
+
igt_subtest("mocs-reset")
run_tests(RESET);
@@ -605,8 +601,4 @@ igt_main
igt_subtest("mocs-hibernate")
run_tests(HIBERNATE);
-
- igt_fixture {
- intel_register_access_fini();
- }
}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2016-07-19 10:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-19 10:25 Peter Antoine [this message]
2016-07-21 20:40 ` [I-G-T] igt/gem_mocs_settings: improve RC6 testings Chris Wilson
2016-07-21 21:49 ` Antoine, Peter
2016-07-22 9:38 ` Chris Wilson
2016-07-22 9:40 ` Antoine, Peter
2016-07-22 10:52 ` Dave Gordon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468923929-22731-1-git-send-email-peter.antoine@intel.com \
--to=peter.antoine@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox