From: Dave Gordon <david.s.gordon@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 2/5] drm/i915/guc: refactor guc_init_doorbell_hw()
Date: Tue, 19 Jul 2016 13:59:14 +0100 [thread overview]
Message-ID: <1468933157-22412-2-git-send-email-david.s.gordon@intel.com> (raw)
In-Reply-To: <1468933157-22412-1-git-send-email-david.s.gordon@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
---
drivers/gpu/drm/i915/i915_guc_submission.c | 54 +++++++++++++++++-------------
1 file changed, 30 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
index d8402e4..dc5f485 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -698,32 +698,47 @@ static void gem_release_guc_obj(struct drm_i915_gem_object *obj)
kfree(client);
}
+/* Check that a doorbell register is in the expected state */
+static bool guc_doorbell_check(struct intel_guc *guc, uint16_t db_id)
+{
+ struct drm_i915_private *dev_priv = guc_to_i915(guc);
+ i915_reg_t drbreg = GEN8_DRBREGL(db_id);
+ uint32_t value = I915_READ(drbreg);
+ bool enabled = (value & GUC_DOORBELL_ENABLED) != 0;
+ bool expected = test_bit(db_id, guc->doorbell_bitmap);
+
+ if (enabled == expected)
+ return true;
+
+ DRM_DEBUG_DRIVER("Doorbell %d (reg 0x%x) 0x%x, should be %s\n",
+ db_id, drbreg.reg, value,
+ expected ? "active" : "inactive");
+
+ return false;
+}
+
/*
* Borrow the first client to set up & tear down each unused doorbell
* in turn, to ensure that all doorbell h/w is (re)initialised.
*/
static void guc_init_doorbell_hw(struct intel_guc *guc)
{
- struct drm_i915_private *dev_priv = guc_to_i915(guc);
struct i915_guc_client *client = guc->execbuf_client;
- uint16_t db_id, i;
- int err;
+ uint16_t db_id;
+ int i, err;
+ /* Save client's original doorbell selection */
db_id = client->doorbell_id;
for (i = 0; i < GUC_MAX_DOORBELLS; ++i) {
- i915_reg_t drbreg = GEN8_DRBREGL(i);
- u32 value = I915_READ(drbreg);
-
- if (test_bit(i, guc->doorbell_bitmap))
+ /* Skip if doorbell is OK */
+ if (guc_doorbell_check(guc, i))
continue;
err = guc_update_doorbell_id(guc, client, i);
-
- /* Report update failure or unexpectedly active doorbell */
- if (err || (i != db_id && (value & GUC_DOORBELL_ENABLED)))
- DRM_DEBUG_DRIVER("Doorbell %d (reg 0x%x) was 0x%x, err %d\n",
- i, drbreg.reg, value, err);
+ if (err)
+ DRM_DEBUG_DRIVER("Doorbell %d update failed, err %d\n",
+ i, err);
}
/* Restore to original value */
@@ -732,18 +747,9 @@ static void guc_init_doorbell_hw(struct intel_guc *guc)
DRM_ERROR("Failed to restore doorbell to %d, err %d\n",
db_id, err);
- for (i = 0; i < GUC_MAX_DOORBELLS; ++i) {
- i915_reg_t drbreg = GEN8_DRBREGL(i);
- u32 value = I915_READ(drbreg);
-
- if (test_bit(i, guc->doorbell_bitmap))
- continue;
-
- if (i != db_id && (value & GUC_DOORBELL_ENABLED))
- DRM_DEBUG_DRIVER("Doorbell %d (reg 0x%x) finally 0x%x\n",
- i, drbreg.reg, value);
-
- }
+ /* Read back & verify all doorbell registers */
+ for (i = 0; i < GUC_MAX_DOORBELLS; ++i)
+ (void)guc_doorbell_check(guc, i);
}
/**
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-07-19 12:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-19 12:59 [PATCH 1/5] drm/i915/guc: doorbell reset should avoid used doorbells Dave Gordon
2016-07-19 12:59 ` Dave Gordon [this message]
2016-07-19 14:51 ` [PATCH 2/5] drm/i915/guc: refactor guc_init_doorbell_hw() Tvrtko Ursulin
2016-07-19 12:59 ` [PATCH 3/5] drm/i915/guc: use a separate GuC client for each engine Dave Gordon
2016-07-19 15:02 ` Tvrtko Ursulin
2016-07-19 15:13 ` Dave Gordon
2016-07-19 12:59 ` [PATCH 4/5] drm/i915/guc: add engine mask to GuC client & pass to GuC Dave Gordon
2016-07-19 15:06 ` Tvrtko Ursulin
2016-07-27 20:06 ` kbuild test robot
2016-07-19 12:59 ` [PATCH 5/5] drm/i915/guc: use for_each_engine_id() where appropriate Dave Gordon
2016-07-19 15:09 ` Tvrtko Ursulin
2016-07-19 14:16 ` ✗ Ro.CI.BAT: failure for series starting with [1/5] drm/i915/guc: doorbell reset should avoid used doorbells Patchwork
2016-07-19 15:07 ` Dave Gordon
2016-07-19 14:43 ` [PATCH 1/5] " Tvrtko Ursulin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468933157-22412-2-git-send-email-david.s.gordon@intel.com \
--to=david.s.gordon@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox