From: "Lee, Shawn C" <shawn.c.lee@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: [PATCH] drm/i915 : Restore PWM_GRANULARITY after resume
Date: Thu, 8 Sep 2016 18:18:40 +0800 [thread overview]
Message-ID: <1473329920-4449-1-git-send-email-shawn.c.lee@intel.com> (raw)
From: "Lee, Shawn C" <shawn.c.lee@intel.com>
SPT_PWM_GRANULARITY (SOUTH_CHICKEN1, bit 0) controls the granularity
(minimum increment) of the PWM backlight control counter. PWM frequency
adjustment on 128 clock increments when this bit was 1. And 16 clock
increments when it was 0.
PWM frequency multiple octuple (from 200Hz to 1.6KHz) due to
SPT_PWM_GRANULARITY was clear to 0 after S3. This patch save
SOUTH_CHICKEN1 register value before suspend. And will restore
it after i915 resume.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97486
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Wei Shun Chen <wei.shun.chang@intel.com>
Reviewed-by: Gary C Wang <gary.c.wang@intel.com>
Signed-off-by: Shawn Lee <shawn.c.lee@intel.com>
---
drivers/gpu/drm/i915/intel_drv.h | 1 +
drivers/gpu/drm/i915/intel_panel.c | 21 +++++++++++++++++++--
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 570a7ca..4c28692 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -256,6 +256,7 @@ struct intel_panel {
u32 level;
u32 min;
u32 max;
+ u32 pwm_granularity;
bool enabled;
bool combination_mode; /* gen 2/4 only */
bool active_low_pwm;
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index c10e9b0..720fd5a 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -841,7 +841,17 @@ static void lpt_enable_backlight(struct intel_connector *connector)
{
struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
struct intel_panel *panel = &connector->panel;
- u32 pch_ctl1, pch_ctl2;
+ u32 pch_ctl1, pch_ctl2, mul;
+
+ if (HAS_PCH_LPT(dev_priv)) {
+ mul = I915_READ(SOUTH_CHICKEN2);
+ mul &= ~LPT_PWM_GRANULARITY;
+ I915_WRITE(SOUTH_CHICKEN2, mul | panel->backlight.pwm_granularity);
+ } else {
+ mul = I915_READ(SOUTH_CHICKEN1);
+ mul &= ~SPT_PWM_GRANULARITY;
+ I915_WRITE(SOUTH_CHICKEN1, mul | panel->backlight.pwm_granularity);
+ }
pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
if (pch_ctl1 & BLM_PCH_PWM_ENABLE) {
@@ -1413,7 +1423,7 @@ static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unus
{
struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
struct intel_panel *panel = &connector->panel;
- u32 pch_ctl1, pch_ctl2, val;
+ u32 pch_ctl1, pch_ctl2, val, mul;
pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1);
panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY;
@@ -1421,6 +1431,13 @@ static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unus
pch_ctl2 = I915_READ(BLC_PWM_PCH_CTL2);
panel->backlight.max = pch_ctl2 >> 16;
+ if (HAS_PCH_LPT(dev_priv))
+ mul = I915_READ(SOUTH_CHICKEN2) & LPT_PWM_GRANULARITY;
+ else
+ mul = I915_READ(SOUTH_CHICKEN1) & SPT_PWM_GRANULARITY;
+
+ panel->backlight.pwm_granularity = mul;
+
if (!panel->backlight.max)
panel->backlight.max = get_backlight_max_vbt(connector);
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2016-09-08 9:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-08 10:18 Lee, Shawn C [this message]
2016-09-08 10:24 ` ✓ Fi.CI.BAT: success for drm/i915 : Restore PWM_GRANULARITY after resume Patchwork
2016-09-09 7:46 ` [PATCH] " Jani Nikula
2016-09-19 8:53 ` [PATCH v2] " Lee, Shawn C
2016-09-19 8:38 ` Jani Nikula
2016-09-19 8:41 ` Jani Nikula
2016-09-19 10:30 ` kbuild test robot
2016-09-19 10:50 ` kbuild test robot
2016-09-19 9:56 ` [PATCH] " Lee, Shawn C
2016-09-19 9:42 ` Jani Nikula
2016-09-19 10:01 ` Lee, Shawn C
2016-09-19 10:20 ` ✓ Fi.CI.BAT: success for drm/i915 : Restore PWM_GRANULARITY after resume (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473329920-4449-1-git-send-email-shawn.c.lee@intel.com \
--to=shawn.c.lee@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox