* [PATCH] drm/i915/gen9: only add the planes actually affected by ddb changes
@ 2016-09-29 18:39 Paulo Zanoni
2016-09-29 18:45 ` Lyude Paul
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Paulo Zanoni @ 2016-09-29 18:39 UTC (permalink / raw)
To: intel-gfx; +Cc: Paulo Zanoni, Lyude, Mike Lothian, stable
We were previously adding all the planes owned by the CRTC even when
the ddb partitioning didn't change for them. As a consequence, a lot
of functions were being called when we were just moving the cursor
around the screen, such as skylake_update_primary_plane().
This was causing flickering on the primary plane when moving the
cursor. I'm not 100% sure which operation caused the flickering, but
we were writing to a lot of registers, so it could be any of these
writes. With this patch, just moving the mouse won't add the primary
plane to the commit since it won't trigger a change in DDB
partitioning.
Fixes: 05a76d3d6ad1 ("drm/i915/skl: Ensure pipes with changed wms get
added to the state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888
Cc: Lyude <cpaul@redhat.com>
Cc: Mike Lothian <mike@fireburn.co.uk>
Cc: stable@vger.kernel.org
Reported-and-bisected-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 41 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 40 insertions(+), 1 deletion(-)
I can confirm this fixes the flickering I was seeing.
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 5d39ad2..1cf34a3 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3966,6 +3966,45 @@ pipes_modified(struct drm_atomic_state *state)
return ret;
}
+int
+skl_ddb_add_affected_planes(struct intel_crtc_state *cstate)
+{
+ struct drm_atomic_state *state = cstate->base.state;
+ struct drm_device *dev = state->dev;
+ struct drm_crtc *crtc = cstate->base.crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
+ struct skl_ddb_allocation *new_ddb = &intel_state->wm_results.ddb;
+ struct skl_ddb_allocation *cur_ddb = &dev_priv->wm.skl_hw.ddb;
+ struct drm_plane_state *plane_state;
+ struct drm_plane *plane;
+ enum pipe pipe = intel_crtc->pipe;
+ int id;
+
+ WARN_ON(!drm_atomic_get_existing_crtc_state(state, crtc));
+
+ drm_for_each_plane_mask(plane, dev, crtc->state->plane_mask) {
+ id = skl_wm_plane_id(to_intel_plane(plane));
+
+ if (cur_ddb->plane[pipe][id].start ==
+ new_ddb->plane[pipe][id].start &&
+ cur_ddb->plane[pipe][id].end ==
+ new_ddb->plane[pipe][id].end &&
+ cur_ddb->y_plane[pipe][id].start ==
+ new_ddb->y_plane[pipe][id].start &&
+ cur_ddb->y_plane[pipe][id].end ==
+ new_ddb->y_plane[pipe][id].end)
+ continue;
+
+ plane_state = drm_atomic_get_plane_state(state, plane);
+ if (IS_ERR(plane_state))
+ return PTR_ERR(plane_state);
+ }
+
+ return 0;
+}
+
static int
skl_compute_ddb(struct drm_atomic_state *state)
{
@@ -4030,7 +4069,7 @@ skl_compute_ddb(struct drm_atomic_state *state)
if (ret)
return ret;
- ret = drm_atomic_add_affected_planes(state, &intel_crtc->base);
+ ret = skl_ddb_add_affected_planes(cstate);
if (ret)
return ret;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH] drm/i915/gen9: only add the planes actually affected by ddb changes
2016-09-29 18:39 [PATCH] drm/i915/gen9: only add the planes actually affected by ddb changes Paulo Zanoni
@ 2016-09-29 18:45 ` Lyude Paul
2016-09-29 19:36 ` Paulo Zanoni
2016-09-29 19:19 ` ✗ Fi.CI.BAT: warning for " Patchwork
2016-09-29 20:19 ` ✗ Fi.CI.BAT: warning for drm/i915/gen9: only add the planes actually affected by ddb changes (rev2) Patchwork
2 siblings, 1 reply; 6+ messages in thread
From: Lyude Paul @ 2016-09-29 18:45 UTC (permalink / raw)
To: Paulo Zanoni, intel-gfx; +Cc: stable
On Thu, 2016-09-29 at 15:39 -0300, Paulo Zanoni wrote:
> We were previously adding all the planes owned by the CRTC even when
> the ddb partitioning didn't change for them. As a consequence, a lot
> of functions were being called when we were just moving the cursor
> around the screen, such as skylake_update_primary_plane().
>
> This was causing flickering on the primary plane when moving the
> cursor. I'm not 100% sure which operation caused the flickering, but
> we were writing to a lot of registers, so it could be any of these
> writes. With this patch, just moving the mouse won't add the primary
> plane to the commit since it won't trigger a change in DDB
> partitioning.
>
> Fixes: 05a76d3d6ad1 ("drm/i915/skl: Ensure pipes with changed wms get
> added to the state")
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888
> Cc: Lyude <cpaul@redhat.com>
> Cc: Mike Lothian <mike@fireburn.co.uk>
> Cc: stable@vger.kernel.org
> Reported-and-bisected-by: Mike Lothian <mike@fireburn.co.uk>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
> ---
> drivers/gpu/drm/i915/intel_pm.c | 41
> ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 40 insertions(+), 1 deletion(-)
>
>
> I can confirm this fixes the flickering I was seeing.
>
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c
> b/drivers/gpu/drm/i915/intel_pm.c
> index 5d39ad2..1cf34a3 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3966,6 +3966,45 @@ pipes_modified(struct drm_atomic_state *state)
> return ret;
> }
>
> +int
> +skl_ddb_add_affected_planes(struct intel_crtc_state *cstate)
> +{
> + struct drm_atomic_state *state = cstate->base.state;
> + struct drm_device *dev = state->dev;
> + struct drm_crtc *crtc = cstate->base.crtc;
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct drm_i915_private *dev_priv = to_i915(dev);
> + struct intel_atomic_state *intel_state =
> to_intel_atomic_state(state);
> + struct skl_ddb_allocation *new_ddb = &intel_state-
> >wm_results.ddb;
> + struct skl_ddb_allocation *cur_ddb = &dev_priv-
> >wm.skl_hw.ddb;
> + struct drm_plane_state *plane_state;
> + struct drm_plane *plane;
> + enum pipe pipe = intel_crtc->pipe;
> + int id;
> +
> + WARN_ON(!drm_atomic_get_existing_crtc_state(state, crtc));
> +
> + drm_for_each_plane_mask(plane, dev, crtc->state->plane_mask)
> {
> + id = skl_wm_plane_id(to_intel_plane(plane));
> +
> + if (cur_ddb->plane[pipe][id].start ==
> + new_ddb->plane[pipe][id].start &&
> + cur_ddb->plane[pipe][id].end ==
> + new_ddb->plane[pipe][id].end &&
> + cur_ddb->y_plane[pipe][id].start ==
> + new_ddb->y_plane[pipe][id].start &&
> + cur_ddb->y_plane[pipe][id].end ==
> + new_ddb->y_plane[pipe][id].end)
> + continue;
Just use skl_ddb_entry_equals() here.
With that fixed:
Reviewed-by: Lyude <cpaul@redhat.com>
> +
> + plane_state = drm_atomic_get_plane_state(state,
> plane);
> + if (IS_ERR(plane_state))
> + return PTR_ERR(plane_state);
> + }
> +
> + return 0;
> +}
> +
> static int
> skl_compute_ddb(struct drm_atomic_state *state)
> {
> @@ -4030,7 +4069,7 @@ skl_compute_ddb(struct drm_atomic_state *state)
> if (ret)
> return ret;
>
> - ret = drm_atomic_add_affected_planes(state,
> &intel_crtc->base);
> + ret = skl_ddb_add_affected_planes(cstate);
> if (ret)
> return ret;
> }
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH] drm/i915/gen9: only add the planes actually affected by ddb changes
2016-09-29 18:45 ` Lyude Paul
@ 2016-09-29 19:36 ` Paulo Zanoni
2016-09-30 17:21 ` Lyude
0 siblings, 1 reply; 6+ messages in thread
From: Paulo Zanoni @ 2016-09-29 19:36 UTC (permalink / raw)
To: intel-gfx; +Cc: Paulo Zanoni, stable
We were previously adding all the planes owned by the CRTC even when
the ddb partitioning didn't change for them. As a consequence, a lot
of functions were being called when we were just moving the cursor
around the screen, such as skylake_update_primary_plane().
This was causing flickering on the primary plane when moving the
cursor. I'm not 100% sure which operation caused the flickering, but
we were writing to a lot of registers, so it could be any of these
writes. With this patch, just moving the mouse won't add the primary
plane to the commit since it won't trigger a change in DDB
partitioning.
v2: Use skl_ddb_entry_equal() (Lyude).
Fixes: 05a76d3d6ad1 ("drm/i915/skl: Ensure pipes with changed wms get added to the state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888
Cc: Lyude <cpaul@redhat.com>
Cc: Mike Lothian <mike@fireburn.co.uk>
Cc: stable@vger.kernel.org
Reported-and-bisected-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Lyude <cpaul@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/intel_pm.c | 37 ++++++++++++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 5d39ad2..425544b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3966,6 +3966,41 @@ pipes_modified(struct drm_atomic_state *state)
return ret;
}
+int
+skl_ddb_add_affected_planes(struct intel_crtc_state *cstate)
+{
+ struct drm_atomic_state *state = cstate->base.state;
+ struct drm_device *dev = state->dev;
+ struct drm_crtc *crtc = cstate->base.crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
+ struct skl_ddb_allocation *new_ddb = &intel_state->wm_results.ddb;
+ struct skl_ddb_allocation *cur_ddb = &dev_priv->wm.skl_hw.ddb;
+ struct drm_plane_state *plane_state;
+ struct drm_plane *plane;
+ enum pipe pipe = intel_crtc->pipe;
+ int id;
+
+ WARN_ON(!drm_atomic_get_existing_crtc_state(state, crtc));
+
+ drm_for_each_plane_mask(plane, dev, crtc->state->plane_mask) {
+ id = skl_wm_plane_id(to_intel_plane(plane));
+
+ if (skl_ddb_entry_equal(&cur_ddb->plane[pipe][id],
+ &new_ddb->plane[pipe][id]) &&
+ skl_ddb_entry_equal(&cur_ddb->y_plane[pipe][id],
+ &new_ddb->y_plane[pipe][id]))
+ continue;
+
+ plane_state = drm_atomic_get_plane_state(state, plane);
+ if (IS_ERR(plane_state))
+ return PTR_ERR(plane_state);
+ }
+
+ return 0;
+}
+
static int
skl_compute_ddb(struct drm_atomic_state *state)
{
@@ -4030,7 +4065,7 @@ skl_compute_ddb(struct drm_atomic_state *state)
if (ret)
return ret;
- ret = drm_atomic_add_affected_planes(state, &intel_crtc->base);
+ ret = skl_ddb_add_affected_planes(cstate);
if (ret)
return ret;
}
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH] drm/i915/gen9: only add the planes actually affected by ddb changes
2016-09-29 19:36 ` Paulo Zanoni
@ 2016-09-30 17:21 ` Lyude
0 siblings, 0 replies; 6+ messages in thread
From: Lyude @ 2016-09-30 17:21 UTC (permalink / raw)
To: Paulo Zanoni, intel-gfx; +Cc: Mike Lothian, stable
Pushed, thanks!
On Thu, 2016-09-29 at 16:36 -0300, Paulo Zanoni wrote:
> We were previously adding all the planes owned by the CRTC even when
> the ddb partitioning didn't change for them. As a consequence, a lot
> of functions were being called when we were just moving the cursor
> around the screen, such as skylake_update_primary_plane().
>
> This was causing flickering on the primary plane when moving the
> cursor. I'm not 100% sure which operation caused the flickering, but
> we were writing to a lot of registers, so it could be any of these
> writes. With this patch, just moving the mouse won't add the primary
> plane to the commit since it won't trigger a change in DDB
> partitioning.
>
> v2: Use skl_ddb_entry_equal() (Lyude).
>
> Fixes: 05a76d3d6ad1 ("drm/i915/skl: Ensure pipes with changed wms get
> added to the state")
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888
> Cc: Lyude <cpaul@redhat.com>
> Cc: Mike Lothian <mike@fireburn.co.uk>
> Cc: stable@vger.kernel.org
> Reported-and-bisected-by: Mike Lothian <mike@fireburn.co.uk>
> Reviewed-by: Lyude <cpaul@redhat.com>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
> ---
> drivers/gpu/drm/i915/intel_pm.c | 37
> ++++++++++++++++++++++++++++++++++++-
> 1 file changed, 36 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c
> b/drivers/gpu/drm/i915/intel_pm.c
> index 5d39ad2..425544b 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3966,6 +3966,41 @@ pipes_modified(struct drm_atomic_state *state)
> return ret;
> }
>
> +int
> +skl_ddb_add_affected_planes(struct intel_crtc_state *cstate)
> +{
> + struct drm_atomic_state *state = cstate->base.state;
> + struct drm_device *dev = state->dev;
> + struct drm_crtc *crtc = cstate->base.crtc;
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct drm_i915_private *dev_priv = to_i915(dev);
> + struct intel_atomic_state *intel_state =
> to_intel_atomic_state(state);
> + struct skl_ddb_allocation *new_ddb = &intel_state-
> >wm_results.ddb;
> + struct skl_ddb_allocation *cur_ddb = &dev_priv-
> >wm.skl_hw.ddb;
> + struct drm_plane_state *plane_state;
> + struct drm_plane *plane;
> + enum pipe pipe = intel_crtc->pipe;
> + int id;
> +
> + WARN_ON(!drm_atomic_get_existing_crtc_state(state, crtc));
> +
> + drm_for_each_plane_mask(plane, dev, crtc->state->plane_mask)
> {
> + id = skl_wm_plane_id(to_intel_plane(plane));
> +
> + if (skl_ddb_entry_equal(&cur_ddb->plane[pipe][id],
> + &new_ddb->plane[pipe][id])
> &&
> + skl_ddb_entry_equal(&cur_ddb->y_plane[pipe][id],
> + &new_ddb-
> >y_plane[pipe][id]))
> + continue;
> +
> + plane_state = drm_atomic_get_plane_state(state,
> plane);
> + if (IS_ERR(plane_state))
> + return PTR_ERR(plane_state);
> + }
> +
> + return 0;
> +}
> +
> static int
> skl_compute_ddb(struct drm_atomic_state *state)
> {
> @@ -4030,7 +4065,7 @@ skl_compute_ddb(struct drm_atomic_state *state)
> if (ret)
> return ret;
>
> - ret = drm_atomic_add_affected_planes(state,
> &intel_crtc->base);
> + ret = skl_ddb_add_affected_planes(cstate);
> if (ret)
> return ret;
> }
--
Cheers,
Lyude
^ permalink raw reply [flat|nested] 6+ messages in thread
* ✗ Fi.CI.BAT: warning for drm/i915/gen9: only add the planes actually affected by ddb changes
2016-09-29 18:39 [PATCH] drm/i915/gen9: only add the planes actually affected by ddb changes Paulo Zanoni
2016-09-29 18:45 ` Lyude Paul
@ 2016-09-29 19:19 ` Patchwork
2016-09-29 20:19 ` ✗ Fi.CI.BAT: warning for drm/i915/gen9: only add the planes actually affected by ddb changes (rev2) Patchwork
2 siblings, 0 replies; 6+ messages in thread
From: Patchwork @ 2016-09-29 19:19 UTC (permalink / raw)
To: Paulo Zanoni; +Cc: intel-gfx
== Series Details ==
Series: drm/i915/gen9: only add the planes actually affected by ddb changes
URL : https://patchwork.freedesktop.org/series/13095/
State : warning
== Summary ==
Series 13095v1 drm/i915/gen9: only add the planes actually affected by ddb changes
https://patchwork.freedesktop.org/api/1.0/series/13095/revisions/1/mbox/
Test kms_pipe_crc_basic:
Subgroup read-crc-pipe-b:
pass -> DMESG-WARN (fi-ilk-650)
Subgroup suspend-read-crc-pipe-a:
dmesg-warn -> PASS (fi-byt-j1900)
fi-bdw-5557u total:244 pass:229 dwarn:0 dfail:0 fail:0 skip:15
fi-bsw-n3050 total:244 pass:202 dwarn:0 dfail:0 fail:0 skip:42
fi-bxt-t5700 total:244 pass:214 dwarn:0 dfail:0 fail:0 skip:30
fi-byt-j1900 total:244 pass:211 dwarn:1 dfail:0 fail:1 skip:31
fi-byt-n2820 total:244 pass:208 dwarn:0 dfail:0 fail:1 skip:35
fi-hsw-4770 total:244 pass:222 dwarn:0 dfail:0 fail:0 skip:22
fi-hsw-4770r total:244 pass:222 dwarn:0 dfail:0 fail:0 skip:22
fi-ilk-650 total:244 pass:181 dwarn:1 dfail:0 fail:2 skip:60
fi-ivb-3520m total:244 pass:219 dwarn:0 dfail:0 fail:0 skip:25
fi-ivb-3770 total:244 pass:207 dwarn:0 dfail:0 fail:0 skip:37
fi-skl-6260u total:244 pass:230 dwarn:0 dfail:0 fail:0 skip:14
fi-skl-6700hq total:244 pass:221 dwarn:1 dfail:0 fail:0 skip:22
fi-skl-6700k total:244 pass:219 dwarn:1 dfail:0 fail:0 skip:24
fi-skl-6770hq total:244 pass:228 dwarn:1 dfail:0 fail:1 skip:14
fi-snb-2520m total:244 pass:208 dwarn:0 dfail:0 fail:0 skip:36
fi-snb-2600 total:244 pass:207 dwarn:0 dfail:0 fail:0 skip:37
Results at /archive/results/CI_IGT_test/Patchwork_2596/
2fbc239494fa3883e164cc89d35f54d22f0c9e1f drm-intel-nightly: 2016y-09m-29d-13h-31m-39s UTC integration manifest
58c2acb drm/i915/gen9: only add the planes actually affected by ddb changes
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread* ✗ Fi.CI.BAT: warning for drm/i915/gen9: only add the planes actually affected by ddb changes (rev2)
2016-09-29 18:39 [PATCH] drm/i915/gen9: only add the planes actually affected by ddb changes Paulo Zanoni
2016-09-29 18:45 ` Lyude Paul
2016-09-29 19:19 ` ✗ Fi.CI.BAT: warning for " Patchwork
@ 2016-09-29 20:19 ` Patchwork
2 siblings, 0 replies; 6+ messages in thread
From: Patchwork @ 2016-09-29 20:19 UTC (permalink / raw)
To: Paulo Zanoni; +Cc: intel-gfx
== Series Details ==
Series: drm/i915/gen9: only add the planes actually affected by ddb changes (rev2)
URL : https://patchwork.freedesktop.org/series/13095/
State : warning
== Summary ==
Series 13095v2 drm/i915/gen9: only add the planes actually affected by ddb changes
https://patchwork.freedesktop.org/api/1.0/series/13095/revisions/2/mbox/
Test drv_module_reload_basic:
pass -> SKIP (fi-ivb-3520m)
Test kms_busy:
Subgroup basic-flip-default-a:
pass -> DMESG-WARN (fi-ilk-650)
Test kms_pipe_crc_basic:
Subgroup hang-read-crc-pipe-a:
pass -> SKIP (fi-ivb-3770)
Subgroup suspend-read-crc-pipe-b:
dmesg-warn -> PASS (fi-byt-j1900)
fi-bdw-5557u total:244 pass:229 dwarn:0 dfail:0 fail:0 skip:15
fi-bsw-n3050 total:244 pass:202 dwarn:0 dfail:0 fail:0 skip:42
fi-bxt-t5700 total:244 pass:214 dwarn:0 dfail:0 fail:0 skip:30
fi-byt-j1900 total:244 pass:211 dwarn:1 dfail:0 fail:1 skip:31
fi-byt-n2820 total:244 pass:208 dwarn:0 dfail:0 fail:1 skip:35
fi-hsw-4770 total:244 pass:222 dwarn:0 dfail:0 fail:0 skip:22
fi-hsw-4770r total:244 pass:222 dwarn:0 dfail:0 fail:0 skip:22
fi-ilk-650 total:244 pass:181 dwarn:1 dfail:0 fail:2 skip:60
fi-ivb-3520m total:244 pass:218 dwarn:0 dfail:0 fail:0 skip:26
fi-ivb-3770 total:244 pass:206 dwarn:0 dfail:0 fail:0 skip:38
fi-skl-6260u total:244 pass:230 dwarn:0 dfail:0 fail:0 skip:14
fi-skl-6700hq total:244 pass:221 dwarn:1 dfail:0 fail:0 skip:22
fi-skl-6700k total:244 pass:219 dwarn:1 dfail:0 fail:0 skip:24
fi-skl-6770hq total:244 pass:228 dwarn:1 dfail:0 fail:1 skip:14
fi-snb-2520m total:244 pass:208 dwarn:0 dfail:0 fail:0 skip:36
fi-snb-2600 total:244 pass:207 dwarn:0 dfail:0 fail:0 skip:37
Results at /archive/results/CI_IGT_test/Patchwork_2597/
2fbc239494fa3883e164cc89d35f54d22f0c9e1f drm-intel-nightly: 2016y-09m-29d-13h-31m-39s UTC integration manifest
8bbcff6 drm/i915/gen9: only add the planes actually affected by ddb changes
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-09-30 17:21 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-29 18:39 [PATCH] drm/i915/gen9: only add the planes actually affected by ddb changes Paulo Zanoni
2016-09-29 18:45 ` Lyude Paul
2016-09-29 19:36 ` Paulo Zanoni
2016-09-30 17:21 ` Lyude
2016-09-29 19:19 ` ✗ Fi.CI.BAT: warning for " Patchwork
2016-09-29 20:19 ` ✗ Fi.CI.BAT: warning for drm/i915/gen9: only add the planes actually affected by ddb changes (rev2) Patchwork
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox