Re: [PATCH] drm/i915: Only poll DW3_A when init DDI PHY for ports B and C.

[Imre Deak <imre.deak@intel.com>]

On to, 2016-11-17 at 11:17 -0800, Rodrigo Vivi wrote:
> According to Bspec we need to
> "Poll for PORT_REF_DW3_A grc_done == 1b"
> only on ports B and C initialization sequence when
> copying rcomp from port A.
> 
> So let's follow the spec and only poll for that case
> and not on every port A initialization.
> 
> v2: Also remove the grc_done check from bxt_ddi_phy_is_enabled()
>     otherwise it might believe it is disabled and force it to re program.
> 
> Cc: Imre Deak <imre.deak@intel.com>
> Cc: Ander Conselvan de Oliveira 
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Reviewed-by: Imre Deak <imre.deak@intel.com>

> ---
>  drivers/gpu/drm/i915/intel_dpio_phy.c | 15 +++------------
>  1 file changed, 3 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c
> index 7a8e82d..321a2ee 100644
> --- a/drivers/gpu/drm/i915/intel_dpio_phy.c
> +++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
> @@ -255,14 +255,6 @@ bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv,
>  		return false;
>  	}
>  
> -	if (phy_info->rcomp_phy == -1 &&
> -	    !(I915_READ(BXT_PORT_REF_DW3(phy)) & GRC_DONE)) {
> -		DRM_DEBUG_DRIVER("DDI PHY %d powered, but GRC isn't done\n",
> -				 phy);
> -
> -		return false;
> -	}
> -
>  	if (!(I915_READ(BXT_PHY_CTL_FAMILY(phy)) & COMMON_RESET_DIS)) {
>  		DRM_DEBUG_DRIVER("DDI PHY %d powered, but still in reset\n",
>  				 phy);
> @@ -367,6 +359,9 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
>  
>  	if (phy_info->rcomp_phy != -1) {
>  		uint32_t grc_code;
> +
> +		bxt_phy_wait_grc_done(dev_priv, phy_info->rcomp_phy);
> +
>  		/*
>  		 * PHY0 isn't connected to an RCOMP resistor so copy over
>  		 * the corresponding calibrated value from PHY1, and disable
> @@ -387,10 +382,6 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
>  	val = I915_READ(BXT_PHY_CTL_FAMILY(phy));
>  	val |= COMMON_RESET_DIS;
>  	I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val);
> -
> -	if (phy_info->rcomp_phy == -1)
> -		bxt_phy_wait_grc_done(dev_priv, phy);
> -
>  }
>  
>  void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy)
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx