[PATCH] drm/i915/lspcon: Enable AUX interrupts for resume time initialization

[Imre Deak <imre.deak@intel.com>]

For LSPCON initialization during system resume we need AUX
functionality, but we call the corresponding encoder reset hook with all
interrupts disabled. Without interrupts we'll do a poll-wait for AUX
transfer completions, which adds a significant delay if the transfers
timeout/need to be retried for some reason.

Fix this by enabling interrupts before calling the reset hooks. Note
that while this will enable AUX interrupts it will keep HPD interrupts
disabled, in a similar way to the init time output setup code.

This issue existed since LSPCON support was added.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index b893e67..1e76e29 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1580,18 +1580,21 @@ static int i915_drm_resume(struct drm_device *dev)
 	intel_opregion_setup(dev_priv);
 
 	intel_init_pch_refclk(dev);
-	drm_mode_config_reset(dev);
 
 	/*
 	 * Interrupts have to be enabled before any batches are run. If not the
 	 * GPU will hang. i915_gem_init_hw() will initiate batches to
 	 * update/restore the context.
 	 *
+	 * drm_mode_config_reset() needs AUX interrupts.
+	 *
 	 * Modeset enabling in intel_modeset_init_hw() also needs working
 	 * interrupts.
 	 */
 	intel_runtime_pm_enable_interrupts(dev_priv);
 
+	drm_mode_config_reset(dev);
+
 	mutex_lock(&dev->struct_mutex);
 	if (i915_gem_init_hw(dev)) {
 		DRM_ERROR("failed to re-initialize GPU, declaring wedged!\n");
-- 
2.5.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx