[PATCH 2/4] drm/i915: Compute sink's max lane count/link BW at Hotplug

[Manasi Navare <manasi.d.navare@intel.com>]

Sink's capabilities are advertised through DPCD registers and get
updated only on hotplug. So they should be computed only once in the
long pulse handler and saved off in intel_dp structure for the use
later. For this reason two new fields max_sink_lane_count and
max_sink_link_bw are added to intel_dp structure.

This also simplifies the fallback link rate/lane count logic
to handle link training failure. In that case, the max_sink_link_bw
and max_sink_lane_count can be reccomputed to match the fallback
values lowering the sink capabilities due to link train failure.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c  | 10 ++++++++--
 drivers/gpu/drm/i915/intel_drv.h |  4 ++++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index db75bb9..434dc7d 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -156,7 +156,7 @@ static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
 	u8 source_max, sink_max;
 
 	source_max = intel_dig_port->max_lanes;
-	sink_max = drm_dp_max_lane_count(intel_dp->dpcd);
+	sink_max = intel_dp->max_sink_lane_count;
 
 	return min(source_max, sink_max);
 }
@@ -213,7 +213,7 @@ static u8 intel_dp_max_lane_count(struct intel_dp *intel_dp)
 
 	*sink_rates = default_rates;
 
-	return (intel_dp_max_link_bw(intel_dp) >> 3) + 1;
+	return (intel_dp->max_sink_link_bw >> 3) + 1;
 }
 
 static int
@@ -4395,6 +4395,12 @@ static bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
 		      yesno(intel_dp_source_supports_hbr2(intel_dp)),
 		      yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
 
+	/* Set the max lane count for sink */
+	intel_dp->max_sink_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
+
+	/* Set the max link BW for sink */
+	intel_dp->max_sink_link_bw = intel_dp_max_link_bw(intel_dp);
+
 	intel_dp_print_rates(intel_dp);
 
 	intel_dp_read_desc(intel_dp);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index fd77a3b..b6526ad 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -906,6 +906,10 @@ struct intel_dp {
 	/* sink rates as reported by DP_SUPPORTED_LINK_RATES */
 	uint8_t num_sink_rates;
 	int sink_rates[DP_MAX_SUPPORTED_RATES];
+	/* Max lane count for the sink as per DPCD registers */
+	uint8_t max_sink_lane_count;
+	/* Max link BW for the sink as per DPCD registers */
+	int max_sink_link_bw;
 	/* sink or branch descriptor */
 	struct intel_dp_desc desc;
 	struct drm_dp_aux aux;
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel