From: Ander Conselvan De Oliveira <conselvan2@gmail.com>
To: ville.syrjala@linux.intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 01/14] drm/i915: Store the pipe pixel rate in the crtc state
Date: Mon, 23 Jan 2017 11:13:12 +0200 [thread overview]
Message-ID: <1485162792.3573.39.camel@gmail.com> (raw)
In-Reply-To: <20170120182205.8141-2-ville.syrjala@linux.intel.com>
On Fri, 2017-01-20 at 20:21 +0200, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Rather than recomptuing the pipe pixel rate on demand everwhere, let's
> just stick the precomputed value into the crtc state.
>
> v2: Rebase due to min_pixclk[] code movement
> Document the new pixel_rate struct member (Ander)
> Combine vlv/chv with bdw+ in intel_modeset_readout_hw_state()
>
> Cc: Ander Conselvan De Oliveira <conselvan2@gmail.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 36 ++++++++++++++++++++++++++++-------
> -
> drivers/gpu/drm/i915/intel_drv.h | 6 ++++++
> drivers/gpu/drm/i915/intel_fbc.c | 3 +--
> drivers/gpu/drm/i915/intel_pm.c | 14 +++++++-------
> 4 files changed, 42 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 0f4272f98648..a825107b362b 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7165,7 +7165,7 @@ static bool pipe_config_supports_ips(struct
> drm_i915_private *dev_priv,
> *
> * Should measure whether using a lower cdclk w/o IPS
> */
> - return ilk_pipe_pixel_rate(pipe_config) <=
> + return pipe_config->pixel_rate <=
> dev_priv->max_cdclk_freq * 95 / 100;
> }
>
> @@ -7189,6 +7189,19 @@ static bool intel_crtc_supports_double_wide(const
> struct intel_crtc *crtc)
> (crtc->pipe == PIPE_A || IS_I915G(dev_priv));
> }
>
> +static void intel_crtc_compute_pixel_rate(struct intel_crtc_state
> *crtc_state)
> +{
> + struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc-
> >dev);
> +
> + if (HAS_GMCH_DISPLAY(dev_priv))
> + /* FIXME calculate proper pipe pixel rate for GMCH pfit */
> + crtc_state->pixel_rate =
> + crtc_state->base.adjusted_mode.crtc_clock;
> + else
> + crtc_state->pixel_rate =
> + ilk_pipe_pixel_rate(crtc_state);
> +}
> +
> static int intel_crtc_compute_config(struct intel_crtc *crtc,
> struct intel_crtc_state *pipe_config)
> {
> @@ -7235,6 +7248,8 @@ static int intel_crtc_compute_config(struct intel_crtc
> *crtc,
> adjusted_mode->crtc_hsync_start == adjusted_mode-
> >crtc_hdisplay)
> return -EINVAL;
>
> + intel_crtc_compute_pixel_rate(pipe_config);
> +
> if (HAS_IPS(dev_priv))
> hsw_compute_ips_config(crtc, pipe_config);
>
> @@ -10283,7 +10298,7 @@ static int ilk_max_pixel_rate(struct drm_atomic_state
> *state)
> continue;
> }
>
> - pixel_rate = ilk_pipe_pixel_rate(crtc_state);
> + pixel_rate = crtc_state->pixel_rate;
>
> if (IS_BROADWELL(dev_priv) || IS_GEN9(dev_priv))
> pixel_rate =
> bdw_adjust_min_pipe_pixel_rate(crtc_state,
> @@ -12792,9 +12807,10 @@ static void intel_dump_pipe_config(struct intel_crtc
> *crtc,
> DRM_DEBUG_KMS("adjusted mode:\n");
> drm_mode_debug_printmodeline(&pipe_config->base.adjusted_mode);
> intel_dump_crtc_timings(&pipe_config->base.adjusted_mode);
> - DRM_DEBUG_KMS("port clock: %d, pipe src size: %dx%d\n",
> + DRM_DEBUG_KMS("port clock: %d, pipe src size: %dx%d, pixel rate
> %d\n",
> pipe_config->port_clock,
> - pipe_config->pipe_src_w, pipe_config->pipe_src_h);
> + pipe_config->pipe_src_w, pipe_config->pipe_src_h,
> + pipe_config->pixel_rate);
>
> if (INTEL_GEN(dev_priv) >= 9)
> DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x,
> scaler_id: %d\n",
> @@ -13367,6 +13383,7 @@ intel_pipe_config_compare(struct drm_i915_private
> *dev_priv,
> }
>
> PIPE_CONF_CHECK_I(scaler_state.scaler_id);
> + PIPE_CONF_CHECK_CLOCK_FUZZY(pixel_rate);
> }
>
> /* BDW+ don't expose a synchronous way to read the state */
> @@ -13658,6 +13675,8 @@ verify_crtc_state(struct drm_crtc *crtc,
> }
> }
>
> + intel_crtc_compute_pixel_rate(pipe_config);
> +
> if (!new_crtc_state->active)
> return;
>
> @@ -17102,10 +17121,11 @@ static void intel_modeset_readout_hw_state(struct
> drm_device *dev)
> */
> crtc_state->base.mode.private_flags =
> I915_MODE_FLAG_INHERITED;
>
> - if (INTEL_GEN(dev_priv) >= 9 ||
> IS_BROADWELL(dev_priv))
> - pixclk = ilk_pipe_pixel_rate(crtc_state);
> - else if (IS_VALLEYVIEW(dev_priv) ||
> IS_CHERRYVIEW(dev_priv))
> - pixclk = crtc_state-
> >base.adjusted_mode.crtc_clock;
> + intel_crtc_compute_pixel_rate(crtc_state);
> +
> + if (INTEL_GEN(dev_priv) >= 9 ||
> IS_BROADWELL(dev_priv) ||
> + IS_VALLEYVIEW(dev_priv) ||
> IS_CHERRYVIEW(dev_priv))
> + pixclk = crtc_state->pixel_rate;
> else
> WARN_ON(dev_priv-
> >display.modeset_calc_cdclk);
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 0cec0013ace0..3b263d15e16e 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -542,6 +542,12 @@ struct intel_crtc_state {
> * and get clipped at the edges. */
> int pipe_src_w, pipe_src_h;
>
> + /*
> + * Pipe pixel rate, adjusted for
> + * panel fitter/pipe scaler downscaling.
> + */
> + unsigned int pixel_rate;
> +
> /* Whether to set up the PCH/FDI. Note that we never allow sharing
> * between pch encoders and cpu encoders. */
> bool has_pch_encoder;
> diff --git a/drivers/gpu/drm/i915/intel_fbc.c
> b/drivers/gpu/drm/i915/intel_fbc.c
> index 89fe5c8464df..2b4c176510d4 100644
> --- a/drivers/gpu/drm/i915/intel_fbc.c
> +++ b/drivers/gpu/drm/i915/intel_fbc.c
> @@ -743,8 +743,7 @@ static void intel_fbc_update_state_cache(struct intel_crtc
> *crtc,
>
> cache->crtc.mode_flags = crtc_state->base.adjusted_mode.flags;
> if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
> - cache->crtc.hsw_bdw_pixel_rate =
> - ilk_pipe_pixel_rate(crtc_state);
> + cache->crtc.hsw_bdw_pixel_rate = crtc_state->pixel_rate;
>
> cache->plane.rotation = plane_state->base.rotation;
> cache->plane.src_w = drm_rect_width(&plane_state->base.src) >> 16;
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 249623d45be0..94819435641c 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -1807,12 +1807,12 @@ static uint32_t ilk_compute_pri_wm(const struct
> intel_crtc_state *cstate,
>
> cpp = pstate->base.fb->format->cpp[0];
>
> - method1 = ilk_wm_method1(ilk_pipe_pixel_rate(cstate), cpp,
> mem_value);
> + method1 = ilk_wm_method1(cstate->pixel_rate, cpp, mem_value);
>
> if (!is_lp)
> return method1;
>
> - method2 = ilk_wm_method2(ilk_pipe_pixel_rate(cstate),
> + method2 = ilk_wm_method2(cstate->pixel_rate,
> cstate->base.adjusted_mode.crtc_htotal,
> drm_rect_width(&pstate->base.dst),
> cpp, mem_value);
> @@ -1836,8 +1836,8 @@ static uint32_t ilk_compute_spr_wm(const struct
> intel_crtc_state *cstate,
>
> cpp = pstate->base.fb->format->cpp[0];
>
> - method1 = ilk_wm_method1(ilk_pipe_pixel_rate(cstate), cpp,
> mem_value);
> - method2 = ilk_wm_method2(ilk_pipe_pixel_rate(cstate),
> + method1 = ilk_wm_method1(cstate->pixel_rate, cpp, mem_value);
> + method2 = ilk_wm_method2(cstate->pixel_rate,
> cstate->base.adjusted_mode.crtc_htotal,
> drm_rect_width(&pstate->base.dst),
> cpp, mem_value);
> @@ -1863,7 +1863,7 @@ static uint32_t ilk_compute_cur_wm(const struct
> intel_crtc_state *cstate,
> if (!cstate->base.active)
> return 0;
>
> - return ilk_wm_method2(ilk_pipe_pixel_rate(cstate),
> + return ilk_wm_method2(cstate->pixel_rate,
> cstate->base.adjusted_mode.crtc_htotal,
> width, cpp, mem_value);
> }
> @@ -3547,7 +3547,7 @@ static uint32_t skl_adjusted_plane_pixel_rate(const
> struct intel_crtc_state *cst
> * Adjusted plane pixel rate is just the pipe's adjusted pixel rate
> * with additional adjustments for plane-specific scaling.
> */
> - adjusted_pixel_rate = ilk_pipe_pixel_rate(cstate);
> + adjusted_pixel_rate = cstate->pixel_rate;
> downscale_amount = skl_plane_downscale_amount(pstate);
>
> pixel_rate = adjusted_pixel_rate * downscale_amount >> 16;
> @@ -3775,7 +3775,7 @@ skl_compute_linetime_wm(struct intel_crtc_state *cstate)
> if (!cstate->base.active)
> return 0;
>
> - pixel_rate = ilk_pipe_pixel_rate(cstate);
> + pixel_rate = cstate->pixel_rate;
>
> if (WARN_ON(pixel_rate == 0))
> return 0;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-01-23 9:13 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-20 18:21 [PATCH v3 00/14] drm/i915: Introduce intel_cdclk_state (v3) ville.syrjala
2017-01-20 18:21 ` [PATCH v2 01/14] drm/i915: Store the pipe pixel rate in the crtc state ville.syrjala
2017-01-23 9:13 ` Ander Conselvan De Oliveira [this message]
2017-01-24 12:30 ` David Weinehall
2017-01-26 19:50 ` [PATCH v3 " ville.syrjala
2017-01-20 18:21 ` [PATCH v2 02/14] drm/i915: Nuke intel_mode_max_pixclk() ville.syrjala
2017-01-20 18:21 ` [PATCH 03/14] drm/i915: s/get_display_clock_speed/get_cdclk/ ville.syrjala
2017-01-26 19:51 ` [PATCH v2 " ville.syrjala
2017-02-07 18:31 ` [PATCH v3 " ville.syrjala
2017-01-20 18:21 ` [PATCH 04/14] drm/i915: Clean up the .get_cdclk() assignment if ladder ville.syrjala
2017-01-24 12:29 ` David Weinehall
2017-01-25 13:53 ` Ville Syrjälä
2017-02-07 18:32 ` [PATCH v2 " ville.syrjala
2017-01-20 18:21 ` [PATCH v2 05/14] drm/i915: Move most cdclk/rawclk related code to intel_cdclk.c ville.syrjala
2017-01-26 19:51 ` [PATCH v3 " ville.syrjala
2017-02-07 18:33 ` [PATCH v4 " ville.syrjala
2017-01-20 18:21 ` [PATCH 06/14] drm/i915: Pass computed vco to bxt_set_cdclk() ville.syrjala
2017-01-20 18:21 ` [PATCH v3 07/14] drm/i915: Start moving the cdclk stuff into a distinct state structure ville.syrjala
2017-02-07 18:33 ` [PATCH v4 " ville.syrjala
2017-01-20 18:21 ` [PATCH v3 08/14] drm/i915: Track full cdclk state for the logical and actual cdclk frequencies ville.syrjala
2017-01-20 18:22 ` [PATCH v2 09/14] drm/i915: Pass dev_priv to remainder of the cdclk functions ville.syrjala
2017-01-20 18:22 ` [PATCH v3 10/14] drm/i915: Pass the cdclk state to the set_cdclk() functions ville.syrjala
2017-01-20 18:22 ` [PATCH 11/14] drm/i915: Move PFI credit reprogramming into vlv/chv_set_cdclk() ville.syrjala
2017-01-26 19:57 ` [PATCH v2 " ville.syrjala
2017-01-20 18:22 ` [PATCH v2 12/14] drm/i915: Nuke the VLV/CHV PFI programming power domain workaround ville.syrjala
2017-01-20 18:22 ` [PATCH v3 13/14] drm/i915: Replace the .modeset_commit_cdclk() hook with a more direct .set_cdclk() hook ville.syrjala
2017-01-26 19:52 ` [PATCH v4 " ville.syrjala
2017-01-20 18:22 ` [PATCH 14/14] drm/i915: Move ilk_pipe_pixel_rate() to intel_display.c ville.syrjala
2017-01-20 18:54 ` ✗ Fi.CI.BAT: warning for drm/i915: Introduce intel_cdclk_state (rev3) Patchwork
2017-01-23 9:17 ` [PATCH v3 00/14] drm/i915: Introduce intel_cdclk_state (v3) Ander Conselvan De Oliveira
2017-01-26 23:54 ` ✗ Fi.CI.BAT: warning for drm/i915: Introduce intel_cdclk_state (rev8) Patchwork
2017-02-07 20:22 ` ✗ Fi.CI.BAT: warning for drm/i915: Introduce intel_cdclk_state (rev12) Patchwork
2017-02-08 16:55 ` [PATCH v3 00/14] drm/i915: Introduce intel_cdclk_state (v3) Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485162792.3573.39.camel@gmail.com \
--to=conselvan2@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).