From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 4/5] drm/i915: Preserve the state of power wells not explicitly enabled
Date: Fri, 17 Feb 2017 17:39:45 +0200 [thread overview]
Message-ID: <1487345986-26511-5-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1487345986-26511-1-git-send-email-imre.deak@intel.com>
Atm, power wells that BIOS has enabled, but which we don't explicitly
enable during power domain initialization would get disabled as we clear
the BIOS request bit in the given power well sync_hw hook. To prevent
this copy over any set request bits in the BIOS request register to the
driver request register and clear the BIOS request bit only afterwards.
This doesn't make a difference now, since we enable all power wells
during power domain initialization. A follow-up patchset will add power
wells for which this isn't true, so fix up the inconsistency.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/intel_runtime_pm.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 62c99a9..44d4da3 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -830,12 +830,14 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
- /*
- * We're taking over the BIOS, so clear any requests made by it since
- * the driver is in charge now.
- */
- if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST)
+ /* Take over the request bit if set by BIOS. */
+ if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST) {
+ if (!(I915_READ(HSW_PWR_WELL_DRIVER) &
+ HSW_PWR_WELL_ENABLE_REQUEST))
+ I915_WRITE(HSW_PWR_WELL_DRIVER,
+ HSW_PWR_WELL_ENABLE_REQUEST);
I915_WRITE(HSW_PWR_WELL_BIOS, 0);
+ }
}
static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
@@ -865,8 +867,12 @@ static void skl_power_well_sync_hw(struct drm_i915_private *dev_priv,
uint32_t mask = SKL_POWER_WELL_REQ(power_well->id);
uint32_t bios_req = I915_READ(HSW_PWR_WELL_BIOS);
- /* Clear any request made by BIOS as driver is taking over */
+ /* Take over the request bit if set by BIOS. */
if (bios_req & mask) {
+ uint32_t drv_req = I915_READ(HSW_PWR_WELL_DRIVER);
+
+ if (!(drv_req & mask))
+ I915_WRITE(HSW_PWR_WELL_DRIVER, drv_req | mask);
I915_WRITE(HSW_PWR_WELL_BIOS, bios_req & ~mask);
}
}
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-02-17 15:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-17 15:39 [PATCH v2 0/5] drm/i915: Fix clearing of BIOS power well requests Imre Deak
2017-02-17 15:39 ` [PATCH v2 1/5] drm/i915: Remove redundant toggling from the power well sync_hw hooks Imre Deak
2017-02-17 15:39 ` [PATCH v2 2/5] drm/i915: Call the sync_hw hook for power wells without a domain Imre Deak
2017-02-20 8:55 ` Ander Conselvan De Oliveira
2017-02-17 15:39 ` [PATCH v2 3/5] drm/i915/gen9: Fix clearing of the BIOS power well request register Imre Deak
2017-02-17 15:39 ` Imre Deak [this message]
2017-02-20 9:28 ` [PATCH v2 4/5] drm/i915: Preserve the state of power wells not explicitly enabled Ander Conselvan De Oliveira
2017-02-17 15:39 ` [PATCH v2 5/5] drm/i915: Add power well SW/HW state verification Imre Deak
2017-02-20 9:32 ` Ander Conselvan De Oliveira
2017-02-17 19:52 ` ✓ Fi.CI.BAT: success for drm/i915: Fix clearing of BIOS power well requests (rev2) Patchwork
2017-02-20 12:57 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487345986-26511-5-git-send-email-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).