intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Shashank Sharma <shashank.sharma@intel.com>
To: dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
	ander.conselvan.de.oliveira@intel.com,
	ville.syrjala@linux.intel.com
Cc: jose.abreu@synopsys.com, daniel.vetter@intel.com, treding@nvidia.com
Subject: [PATCH v7 0/6] HDMI 2.0: Scrambling in DRM layer
Date: Fri,  3 Mar 2017 21:58:27 +0530	[thread overview]
Message-ID: <1488558513-23534-1-git-send-email-shashank.sharma@intel.com> (raw)

HDMI 2.0 spec defines a method to reduce the RF footprint while
operating at higher pixel clocks, which is called Scrambling.
Scrambling can be controlled over a new set of I2C registers
which are accessible over existing DDC I2C lines, called SCDC
register set.

This patch series contains 6 patches:
- First two patches add generic drm helper functions to read and
  write into SCDC registers. These patches are written by Thierry,
  in a patch series published here:
  https://patchwork.kernel.org/patch/9459051/
  Minor changes were done to map the patches into this series.
  
- Next two patches add functions for scrambling detection and
  scrambling control.

- Next two patches use this infrastructure in DRM layer from
  I915 driver, to enable scrambling on a GLK deivce which sports
  a native HDMI 2.0 controller.

V2:
- addressed review comments from Thierry, Ville and Dhinakaran
- added signed-off-by:self in first two patches(Jani N)

V3:
- addressed review comments from Jose and Jani

V4:
- addressed review comments from Maarten on patch 5,
  rebase all other patches

V5:
- addressed review comments from Ville/Ander on patch 1, 4, 5
  rebase all other patches

V6:
- addressed review comments from Ville on patch 4, 5
  rebase all other patches

V7:
- addressed review comments from Ander on patch 5
  rebase all other patches,
  added r-b from Jose on patch 3,4
 
Shashank Sharma (4):
  drm/edid: detect SCDC support in HF-VSDB
  drm/edid: detect SCDC support in HF-VSDB
  drm/i915: enable scrambling
  drm/i915: allow HDMI 2.0 clock rates

Thierry Reding (2):
  drm: Add SCDC helpers
  drm/edid: check for HF-VSDB block

 Documentation/gpu/drm-kms-helpers.rst |  12 ++
 drivers/gpu/drm/Makefile              |   3 +-
 drivers/gpu/drm/drm_edid.c            |  60 +++++++++
 drivers/gpu/drm/drm_scdc_helper.c     | 244 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_reg.h       |   7 +
 drivers/gpu/drm/i915/intel_ddi.c      |  33 +++++
 drivers/gpu/drm/i915/intel_display.c  |   3 +
 drivers/gpu/drm/i915/intel_drv.h      |  10 ++
 drivers/gpu/drm/i915/intel_hdmi.c     |  54 ++++++++
 include/drm/drm_connector.h           |  52 ++++++++
 include/drm/drm_edid.h                |   1 -
 include/drm/drm_scdc_helper.h         | 159 ++++++++++++++++++++++
 include/linux/hdmi.h                  |   1 +
 13 files changed, 637 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/drm_scdc_helper.c
 create mode 100644 include/drm/drm_scdc_helper.h

-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2017-03-03 16:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-03 16:28 Shashank Sharma [this message]
2017-03-03 16:28 ` [PATCH v7 1/6] drm: Add SCDC helpers Shashank Sharma
2017-03-03 16:28 ` [PATCH v7 2/6] drm/edid: check for HF-VSDB block Shashank Sharma
2017-03-03 16:28 ` [PATCH v7 3/6] drm/edid: detect SCDC support in HF-VSDB Shashank Sharma
2017-03-03 16:28 ` [PATCH v7 4/6] " Shashank Sharma
2017-03-03 16:28 ` [PATCH v7 5/6] drm/i915: enable scrambling Shashank Sharma
2017-03-07 10:12   ` Ander Conselvan De Oliveira
2017-03-03 16:28 ` [PATCH v7 6/6] drm/i915: allow HDMI 2.0 clock rates Shashank Sharma
2017-03-03 17:32 ` ✗ Fi.CI.BAT: failure for HDMI 2.0: Scrambling in DRM layer (rev7) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1488558513-23534-1-git-send-email-shashank.sharma@intel.com \
    --to=shashank.sharma@intel.com \
    --cc=ander.conselvan.de.oliveira@intel.com \
    --cc=daniel.vetter@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jose.abreu@synopsys.com \
    --cc=treding@nvidia.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).