From: Paulo Zanoni <paulo.r.zanoni@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: Re: [PATCH 04/27] drm/i915/icl: Icelake interrupt register addresses and bits
Date: Wed, 10 Jan 2018 17:54:49 -0200 [thread overview]
Message-ID: <1515614089.22902.68.camel@intel.com> (raw)
In-Reply-To: <20180109232336.11029-5-paulo.r.zanoni@intel.com>
Em Ter, 2018-01-09 às 21:23 -0200, Paulo Zanoni escreveu:
> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>
> MMIO addresses and register definition for the new interrupt
> registers in Gen11.
>
> v2: Removed spelt out VCS and VECS bit definitions. (Daniel Vetter)
> v3: Adjust VCS and VECS. (Daniele Ceraolo Spurio)
> v4: Bikeshedding (Paulo).
Addresses and bits seem to match the spec.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
>
> Cc: Ceraolo Spurio, Daniele <daniele.ceraolospurio@intel.com>
The "," char above seems to confuse git send-email.
> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 63
> +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h
> b/drivers/gpu/drm/i915/i915_reg.h
> index f773f2265af3..039ad46a4434 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6956,6 +6956,69 @@ enum {
> #define GEN8_PCU_IIR _MMIO(0x444e8)
> #define GEN8_PCU_IER _MMIO(0x444ec)
>
> +#define GEN11_GFX_MSTR_IRQ _MMIO(0x190010)
> +#define GEN11_MASTER_IRQ (1 << 31)
> +#define GEN11_PCU_IRQ (1 << 30)
> +#define GEN11_DISPLAY_IRQ (1 << 16)
> +#define GEN11_GT_DW_IRQ(x) (1 << (x))
> +#define GEN11_GT_DW1_IRQ (1 << 1)
> +#define GEN11_GT_DW0_IRQ (1 << 0)
> +
> +#define GEN11_DISPLAY_INT_CTL _MMIO(0x44200)
> +#define GEN11_DISPLAY_IRQ_ENABLE (1 << 31)
> +#define GEN11_AUDIO_CODEC_IRQ (1 << 24)
> +#define GEN11_DE_PCH_IRQ (1 << 23)
> +#define GEN11_DE_MISC_IRQ (1 << 22)
> +#define GEN11_DE_PORT_IRQ (1 << 20)
> +#define GEN11_DE_PIPE_C (1 << 18)
> +#define GEN11_DE_PIPE_B (1 << 17)
> +#define GEN11_DE_PIPE_A (1 << 16)
> +
> +#define GEN11_GT_INTR_DW0 _MMIO(0x190018)
> +#define GEN11_CSME (31)
> +#define GEN11_GUNIT (28)
> +#define GEN11_GUC (25)
> +#define GEN11_WDPERF (20)
> +#define GEN11_KCR (19)
> +#define GEN11_GTPM (16)
> +#define GEN11_BCS (15)
> +#define GEN11_RCS0 (0)
> +
> +#define GEN11_GT_INTR_DW1 _MMIO(0x19001c)
> +#define GEN11_VECS(x) (31 - (x))
> +#define GEN11_VCS(x) (x)
> +
> +#define GEN11_GT_INTR_DW(x) _MMIO(0x190018 + (x * 4))
> +
> +#define GEN11_INTR_IDENTITY_REG0 _MMIO(0x190060)
> +#define GEN11_INTR_IDENTITY_REG1 _MMIO(0x190064)
> +#define GEN11_INTR_DATA_VALID (1 << 31)
> +#define GEN11_INTR_ENGINE_MASK (0xffff)
> +
> +#define GEN11_INTR_IDENTITY_REG(x) _MMIO(0x190060 + (x * 4))
> +
> +#define GEN11_IIR_REG0_SELECTOR _MMIO(0x190070)
> +#define GEN11_IIR_REG1_SELECTOR _MMIO(0x190074)
> +
> +#define GEN11_IIR_REG_SELECTOR(x) _MMIO(0x190070 + (x * 4))
> +
> +#define GEN11_RENDER_COPY_INTR_ENABLE _MMIO(0x190030)
> +#define GEN11_VCS_VECS_INTR_ENABLE _MMIO(0x190034)
> +#define GEN11_GUC_SG_INTR_ENABLE _MMIO(0x190038)
> +#define GEN11_GPM_WGBOXPERF_INTR_ENABLE _MMIO(0x19003c)
> +#define GEN11_CRYPTO_RSVD_INTR_ENABLE _MMIO(0x190040)
> +#define GEN11_GUNIT_CSME_INTR_ENABLE _MMIO(0x190044)
> +
> +#define GEN11_RCS0_RSVD_INTR_MASK _MMIO(0x190090)
> +#define GEN11_BCS_RSVD_INTR_MASK _MMIO(0x1900a0)
> +#define GEN11_VCS0_VCS1_INTR_MASK _MMIO(0x1900a8)
> +#define GEN11_VCS2_VCS3_INTR_MASK _MMIO(0x1900ac)
> +#define GEN11_VECS0_VECS1_INTR_MASK _MMIO(0x1900d0)
> +#define GEN11_GUC_SG_INTR_MASK _MMIO(0x1900e8)
> +#define GEN11_GPM_WGBOXPERF_INTR_MASK _MMIO(0x1900ec)
> +#define GEN11_CRYPTO_RSVD_INTR_MASK _MMIO(0x1900f0)
> +#define GEN11_GUNIT_CSME_INTR_MASK _MMIO(0x1900f4)
> +
> #define ILK_DISPLAY_CHICKEN2 _MMIO(0x42004)
> /* Required on all Ironlake and Sandybridge according to the B-Spec.
> */
> #define ILK_ELPIN_409_SELECT (1 << 25)
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-01-10 19:55 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-09 23:23 [PATCH 00/27] ICL basic enabling + GEM Paulo Zanoni
2018-01-09 23:23 ` [PATCH 01/27] drm/i915/icl: Add initial Icelake definitions Paulo Zanoni
2018-01-09 23:59 ` Oscar Mateo
2018-01-10 17:57 ` Paulo Zanoni
2018-01-10 18:08 ` Oscar Mateo
2018-01-10 18:22 ` Rodrigo Vivi
2018-01-10 18:38 ` Paulo Zanoni
2018-01-11 1:25 ` Rodrigo Vivi
2018-01-10 10:15 ` Chris Wilson
2018-01-10 18:19 ` Paulo Zanoni
2018-01-10 19:17 ` Paulo Zanoni
2018-01-19 11:27 ` Joonas Lahtinen
2018-01-09 23:23 ` [PATCH 02/27] drm/i915/icl: Add the ICL PCI IDs Paulo Zanoni
2018-01-10 0:09 ` Oscar Mateo
2018-01-10 1:02 ` De Marchi, Lucas
2018-01-10 1:07 ` Oscar Mateo
2018-01-10 14:08 ` Paulo Zanoni
2018-01-09 23:23 ` [PATCH 03/27] drm/i915/icl: add icelake_init_clock_gating() Paulo Zanoni
2018-01-10 9:39 ` Joonas Lahtinen
2018-01-10 18:42 ` Paulo Zanoni
2018-01-09 23:23 ` [PATCH 04/27] drm/i915/icl: Icelake interrupt register addresses and bits Paulo Zanoni
2018-01-10 19:54 ` Paulo Zanoni [this message]
2018-01-09 23:23 ` [PATCH 05/27] drm/i915/icl: Show interrupt registers in debugfs Paulo Zanoni
2018-01-10 9:02 ` Tvrtko Ursulin
2018-01-10 18:49 ` Paulo Zanoni
2018-01-11 8:55 ` Tvrtko Ursulin
2018-01-09 23:23 ` [PATCH 06/27] drm/i915/icl: Prepare for more rings Paulo Zanoni
2018-02-07 22:03 ` Oscar Mateo
2018-01-09 23:23 ` [PATCH 07/27] drm/i915/icl: Interrupt handling Paulo Zanoni
2018-01-10 10:16 ` Joonas Lahtinen
2018-01-10 18:56 ` Paulo Zanoni
2018-01-19 17:30 ` Tvrtko Ursulin
2018-01-19 18:10 ` Paulo Zanoni
2018-01-19 20:33 ` Chris Wilson
2018-01-26 11:22 ` Jani Nikula
2018-02-09 22:34 ` Daniele Ceraolo Spurio
2018-01-09 23:23 ` [PATCH 08/27] drm/i915/icl: Ringbuffer interrupt handling Paulo Zanoni
2018-01-10 10:12 ` Chris Wilson
2018-01-11 19:17 ` Daniele Ceraolo Spurio
2018-01-15 10:38 ` Tvrtko Ursulin
2018-02-01 23:58 ` Belgaumkar, Vinay
2018-02-02 0:36 ` Belgaumkar, Vinay
2018-01-09 23:23 ` [PATCH 09/27] drm/i915/icl: Correctly initialize the Gen11 engines Paulo Zanoni
2018-01-09 23:28 ` [PATCH 10/27] drm/i915/icl: Enhanced execution list support Paulo Zanoni
2018-01-09 23:28 ` [PATCH 11/27] drm/i915/icl: Gen11 render context size Paulo Zanoni
2018-01-11 1:21 ` Rodrigo Vivi
2018-01-11 18:20 ` Oscar Mateo
2018-01-11 18:23 ` [PATCH v3] " Oscar Mateo
2018-01-11 19:40 ` Rodrigo Vivi
2018-01-11 22:53 ` Oscar Mateo
2018-01-11 22:55 ` [PATCH 1/2] drm/i915: Return a default RCS " Oscar Mateo
2018-01-11 22:55 ` [PATCH 2/2 v4] drm/i915/icl: Gen11 render " Oscar Mateo
2018-01-12 0:01 ` Daniele Ceraolo Spurio
2018-01-11 23:08 ` [PATCH 1/2] drm/i915: Return a default RCS " Daniele Ceraolo Spurio
2018-01-09 23:28 ` [PATCH 12/27] drm/i915/icl: Add Indirect Context Offset for Gen11 Paulo Zanoni
2018-01-10 23:44 ` Oscar Mateo
2018-01-25 1:06 ` [PATCH v2 " Michel Thierry
2018-01-09 23:28 ` [PATCH 13/27] drm/i915/icl: Gen11 forcewake support Paulo Zanoni
2018-02-01 0:52 ` [PATCH v10] " Michel Thierry
2018-02-01 10:25 ` Tvrtko Ursulin
2018-02-01 16:02 ` Michel Thierry
2018-02-01 16:08 ` [PATCH v11] " Michel Thierry
2018-02-03 20:26 ` [PATCH v10] " kbuild test robot
2018-02-03 21:43 ` kbuild test robot
2018-01-09 23:28 ` [PATCH 14/27] drm/i915/icl: Set graphics mode register for gen11 Paulo Zanoni
2018-01-10 13:40 ` Arkadiusz Hiler
2018-01-11 19:32 ` Daniele Ceraolo Spurio
2018-01-19 19:30 ` [PATCH v3] " Kelvin Gardiner
2018-01-19 22:46 ` Daniele Ceraolo Spurio
2018-01-09 23:28 ` [PATCH 15/27] drm/i915/icl: new context descriptor support Paulo Zanoni
2018-01-09 23:28 ` [PATCH 16/27] drm/i915/icl: Check for fused-off VDBOX and VEBOX instances Paulo Zanoni
2018-01-10 9:36 ` Chris Wilson
2018-01-10 19:25 ` Oscar Mateo
2018-01-10 19:32 ` Chris Wilson
2018-01-10 19:33 ` Chris Wilson
2018-01-10 23:02 ` Oscar Mateo
2018-01-10 23:03 ` [PATCH v8] " Oscar Mateo
2018-01-09 23:28 ` [PATCH 17/27] drm/i915/icl: Enable the extra video decode and enhancement boxes for Icelake 11 Paulo Zanoni
2018-01-09 23:28 ` [PATCH 18/27] drm/i915/icl: Update subslice define for ICL 11 Paulo Zanoni
2018-01-11 0:06 ` Oscar Mateo
2018-01-11 18:25 ` [PATCH v2] " Oscar Mateo
2018-02-08 16:35 ` Lionel Landwerlin
2018-02-09 17:44 ` Oscar Mateo
2018-02-09 17:48 ` Lionel Landwerlin
2018-02-09 18:00 ` [PATCH v3] " Oscar Mateo
2018-01-09 23:28 ` [PATCH 19/27] drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection Paulo Zanoni
2018-01-10 12:02 ` Tvrtko Ursulin
2018-01-09 23:28 ` [PATCH 20/27] drm/i915/icl: Make use of the SW counter field in the new context descriptor Paulo Zanoni
2018-01-11 21:10 ` Daniele Ceraolo Spurio
2018-01-11 22:37 ` Oscar Mateo
2018-01-11 23:11 ` Daniele Ceraolo Spurio
2018-01-09 23:28 ` [PATCH 21/27] drm/i915/icl: Add reset control register changes Paulo Zanoni
2018-01-09 23:28 ` [PATCH 22/27] drm/i915/icl: Add configuring MOCS in new Icelake engines Paulo Zanoni
2018-01-09 23:28 ` [PATCH 23/27] drm/i915/icl: Split out the servicing of the Selector and Shared IIR registers Paulo Zanoni
2018-01-09 23:28 ` [PATCH 24/27] drm/i915/icl: Handle RPS interrupts correctly for Gen11 Paulo Zanoni
2018-01-09 23:28 ` [PATCH 25/27] drm/i915/icl: Enable RC6 and RPS in Gen11 Paulo Zanoni
2018-01-09 23:28 ` [PATCH 26/27] drm/i915/icl: allow the reg_read ioctl to read the RCS TIMESTAMP register Paulo Zanoni
2018-01-11 1:19 ` Rodrigo Vivi
2018-01-09 23:28 ` [PATCH 27/27] drm/i915/gen11: add support for reading the timestamp frequency Paulo Zanoni
2018-03-28 11:34 ` Lionel Landwerlin
2018-01-10 9:45 ` [PATCH 10/27] drm/i915/icl: Enhanced execution list support Chris Wilson
2018-01-11 19:55 ` Daniele Ceraolo Spurio
2018-01-11 20:55 ` Daniele Ceraolo Spurio
2018-01-17 21:53 ` [PATCH v5] " Daniele Ceraolo Spurio
2018-01-19 13:05 ` Mika Kuoppala
2018-01-19 16:15 ` Daniele Ceraolo Spurio
2018-01-22 15:08 ` Mika Kuoppala
2018-01-22 15:13 ` Chris Wilson
2018-01-22 16:09 ` Daniele Ceraolo Spurio
2018-01-22 17:32 ` Chris Wilson
2018-01-22 21:38 ` Daniele Ceraolo Spurio
2018-01-11 1:32 ` [PATCH 00/27] ICL basic enabling + GEM Rodrigo Vivi
2018-01-19 11:45 ` Joonas Lahtinen
2018-01-19 11:55 ` Tvrtko Ursulin
2018-01-19 13:14 ` Mika Kuoppala
2018-01-19 12:08 ` Jani Nikula
2018-01-12 10:06 ` ✗ Fi.CI.BAT: failure for ICL basic enabling + GEM (rev24) Patchwork
2018-01-18 10:21 ` ✗ Fi.CI.BAT: failure for ICL basic enabling + GEM (rev25) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515614089.22902.68.camel@intel.com \
--to=paulo.r.zanoni@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox