From: Paulo Zanoni <paulo.r.zanoni@intel.com>
To: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 13/24] drm/i915/icl: unconditionally init DDI for every port
Date: Wed, 13 Jun 2018 16:47:06 -0700 [thread overview]
Message-ID: <1528933626.2793.4.camel@intel.com> (raw)
In-Reply-To: <20180613233455.GD17137@ldmartin-desk.amr.corp.intel.com>
Em Qua, 2018-06-13 às 16:34 -0700, Lucas De Marchi escreveu:
> On Mon, May 21, 2018 at 05:25:47PM -0700, Paulo Zanoni wrote:
> > On ICP, port present straps are no longer supported. Software
> > should
>
> ICP?? Doesn't it make more sense to say on ICL here?
The register that used to have the port present straps was in the PCH,
it's SFUSE_STRAP. I'll reword the commit message to explicitly mention
it, since the wording on the commit message is basically what's written
on the SFUSE_TRAP page.
>
> > determine the presence through BIOS VBT, hotplug or other
> > mechanisms.
> >
> > Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
>
> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
>
Thanks a lot,
Paulo
> Lucas De Marchi
>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 9 ++++++++-
> > 1 file changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index d5a19c1b3b20..528d9f9c456d 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -13965,7 +13965,14 @@ static void intel_setup_outputs(struct
> > drm_i915_private *dev_priv)
> > if (intel_crt_present(dev_priv))
> > intel_crt_init(dev_priv);
> >
> > - if (IS_GEN9_LP(dev_priv)) {
> > + if (IS_ICELAKE(dev_priv)) {
> > + intel_ddi_init(dev_priv, PORT_A);
> > + intel_ddi_init(dev_priv, PORT_B);
> > + intel_ddi_init(dev_priv, PORT_C);
> > + intel_ddi_init(dev_priv, PORT_D);
> > + intel_ddi_init(dev_priv, PORT_E);
> > + intel_ddi_init(dev_priv, PORT_F);
> > + } else if (IS_GEN9_LP(dev_priv)) {
> > /*
> > * FIXME: Broxton doesn't support port detection
> > via the
> > * DDI_BUF_CTL_A or SFUSE_STRAP registers, find
> > another way to
> > --
> > 2.14.3
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-06-13 23:47 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-22 0:25 [PATCH 00/24] More ICL display patches Paulo Zanoni
2018-05-22 0:25 ` [PATCH 01/24] drm/i915/icl: Extend AUX F interrupts to ICL Paulo Zanoni
2018-05-23 19:02 ` Srivatsa, Anusha
2018-05-22 0:25 ` [PATCH 02/24] drm/i915/icl: GSE interrupt moves from DE_MISC to GU_MISC Paulo Zanoni
2018-05-24 9:22 ` Mika Kuoppala
2018-05-24 22:51 ` Dhinakaran Pandiyan
2018-05-25 12:00 ` Mika Kuoppala
2018-05-25 19:43 ` [PATCH v2] " Dhinakaran Pandiyan
2018-05-25 19:56 ` Chris Wilson
2018-06-14 1:51 ` Dhinakaran Pandiyan
2018-06-14 10:32 ` Ville Syrjälä
2018-06-14 20:21 ` Dhinakaran Pandiyan
2018-06-14 19:54 ` [PATCH v3] " Dhinakaran Pandiyan
2018-06-15 23:18 ` Paulo Zanoni
2018-05-22 0:25 ` [PATCH 03/24] drm/i915/icl: introduce tc_port Paulo Zanoni
2018-05-22 6:13 ` Kumar, Mahesh
2018-05-22 0:25 ` [PATCH 04/24] drm/i915/icl: Support for TC North Display interrupts Paulo Zanoni
2018-06-13 22:20 ` Lucas De Marchi
2018-06-15 23:47 ` Paulo Zanoni
2018-05-22 0:25 ` [PATCH 05/24] drm/i915/icp: Add Interrupt Support Paulo Zanoni
2018-05-24 23:53 ` Lucas De Marchi
2018-05-25 0:45 ` Dhinakaran Pandiyan
2018-05-25 0:43 ` Lucas De Marchi
2018-05-30 0:04 ` Lucas De Marchi
2018-06-13 22:23 ` Lucas De Marchi
2018-06-14 0:04 ` Paulo Zanoni
2018-06-14 2:21 ` Dhinakaran Pandiyan
2018-06-18 19:10 ` Anusha Srivatsa
2018-05-22 0:25 ` [PATCH 06/24] drm/i915/ICL: Add register definition for DFLEXDPMLE Paulo Zanoni
2018-05-25 0:26 ` Paulo Zanoni
2018-05-25 16:14 ` Lucas De Marchi
2018-05-25 16:58 ` Manasi Navare
2018-05-25 18:52 ` [PATCH v2 " Manasi Navare
2018-05-25 19:03 ` [PATCH v3 06/24] drm/i915/icl: " Manasi Navare
2018-05-22 0:25 ` [PATCH 07/24] drm/i915/icl: Add DDI HDMI level selection for ICL Paulo Zanoni
2018-05-25 16:26 ` Lucas De Marchi
2018-06-01 22:32 ` Paulo Zanoni
2018-06-11 23:51 ` Lucas De Marchi
2018-05-22 0:25 ` [PATCH 08/24] drm/i915/icl: Map VBT DDC Pin to BSpec DDC Pin Paulo Zanoni
2018-05-23 19:43 ` James Ausmus
2018-05-22 0:25 ` [PATCH 09/24] drm/i915/icl: Add Icelake PCH detection Paulo Zanoni
2018-05-25 0:29 ` Paulo Zanoni
2018-05-22 0:25 ` [PATCH 10/24] drm/i915/icl: add icelake_get_ddi_pll() Paulo Zanoni
2018-06-13 23:15 ` Lucas De Marchi
2018-06-13 23:51 ` Paulo Zanoni
2018-06-13 23:55 ` Lucas De Marchi
2018-05-22 0:25 ` [PATCH 11/24] drm/i915/icl: Get DDI clock for ICL based on PLLs Paulo Zanoni
2018-05-22 11:44 ` Mika Kahola
2018-05-23 5:48 ` Lucas De Marchi
2018-05-23 21:54 ` Paulo Zanoni
2018-05-23 21:15 ` Paulo Zanoni
2018-05-23 22:44 ` [PATCH v2 " Paulo Zanoni
2018-05-24 13:12 ` Mika Kahola
2018-05-22 0:25 ` [PATCH 12/24] drm/i915/icl: Calculate link clock using the new registers Paulo Zanoni
2018-05-25 0:33 ` Paulo Zanoni
2018-05-22 0:25 ` [PATCH 13/24] drm/i915/icl: unconditionally init DDI for every port Paulo Zanoni
2018-06-13 23:34 ` Lucas De Marchi
2018-06-13 23:47 ` Paulo Zanoni [this message]
2018-05-22 0:25 ` [PATCH 14/24] drm/i915/icl: start adding the TBT pll Paulo Zanoni
2018-06-14 0:37 ` Lucas De Marchi
2018-05-22 0:25 ` [PATCH 15/24] drm/i915/icl: compute the TBT PLL registers Paulo Zanoni
2018-06-08 20:19 ` Srivatsa, Anusha
2018-06-13 21:19 ` Paulo Zanoni
2018-06-18 19:57 ` Srivatsa, Anusha
2018-06-13 21:42 ` [PATCH v2 " Paulo Zanoni
2018-05-22 0:25 ` [PATCH 16/24] drm/i915/icl: Handle hotplug interrupts for DP over TBT Paulo Zanoni
2018-06-14 0:51 ` Lucas De Marchi
2018-05-22 0:25 ` [PATCH 17/24] drm/i915/icl: Add 10-bit support for hdmi Paulo Zanoni
2018-06-20 16:55 ` Ville Syrjälä
2018-05-22 0:25 ` [PATCH 18/24] drm/i915/icl: implement icl_digital_port_connected() Paulo Zanoni
2018-06-19 22:28 ` Lucas De Marchi
2018-06-20 21:01 ` Paulo Zanoni
2018-05-22 0:25 ` [PATCH 19/24] drm/i915/icl: store the port type for TC ports Paulo Zanoni
2018-06-14 19:59 ` Rodrigo Vivi
2018-06-21 0:37 ` Paulo Zanoni
2018-05-22 0:25 ` [PATCH 20/24] drm/i915/icl: implement the tc/legacy HPD {dis, }connect flow for DP Paulo Zanoni
2018-06-21 22:04 ` Srivatsa, Anusha
2018-07-11 21:28 ` Paulo Zanoni
2018-05-22 0:25 ` [PATCH 21/24] drm/i915/icl: implement the legacy HPD {dis, }connect flow for HDMI Paulo Zanoni
2018-06-26 11:41 ` Mika Kahola
2018-05-22 0:25 ` [PATCH 22/24] drm/i915/icl: Update FIA supported lane count for hpd Paulo Zanoni
2018-06-21 22:45 ` Srivatsa, Anusha
2018-05-22 0:25 ` [PATCH 23/24] drm/i915/icl: program MG_DP_MODE Paulo Zanoni
2018-06-19 12:59 ` Maarten Lankhorst
2018-06-19 13:00 ` Maarten Lankhorst
2018-05-22 0:25 ` [PATCH 24/24] drm/i915/icl: toggle PHY clock gating around link training Paulo Zanoni
2018-06-19 13:22 ` Maarten Lankhorst
2018-05-22 0:38 ` ✗ Fi.CI.CHECKPATCH: warning for More ICL display patches Patchwork
2018-05-22 0:45 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-05-22 1:00 ` ✓ Fi.CI.BAT: success " Patchwork
2018-05-22 1:52 ` ✓ Fi.CI.IGT: " Patchwork
2018-05-23 22:59 ` ✗ Fi.CI.CHECKPATCH: warning for More ICL display patches (rev2) Patchwork
2018-05-23 23:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-05-23 23:19 ` ✓ Fi.CI.BAT: success " Patchwork
2018-05-24 0:54 ` ✗ Fi.CI.IGT: failure " Patchwork
2018-05-24 23:42 ` [PATCH 25/24] drm/i915/icl: fix gmbus gpio pin mapping Paulo Zanoni
2018-05-24 23:42 ` [PATCH 26/24] drm/i915/icl: Add allowed DP rates for Icelake Paulo Zanoni
2018-05-25 18:32 ` James Ausmus
2018-06-01 23:43 ` Paulo Zanoni
2018-06-14 19:24 ` Rodrigo Vivi
2018-06-15 0:45 ` Manasi Navare
2018-06-15 5:20 ` Rodrigo Vivi
2018-06-14 19:23 ` Rodrigo Vivi
2018-06-19 20:39 ` Manasi Navare
2018-05-24 23:42 ` [PATCH 27/24] drm/i915/dp: Add support for HBR3 and TPS4 during link training Paulo Zanoni
2018-05-25 18:41 ` James Ausmus
2018-05-24 23:42 ` [PATCH 28/24] drm/i915/icl: implement DVFS for ICL Paulo Zanoni
2018-06-14 19:47 ` Rodrigo Vivi
2018-05-24 23:42 ` [PATCH 29/24] drm/i915/icl: DP_AUX_E is valid on ICL+ Paulo Zanoni
2018-05-25 0:12 ` Paulo Zanoni
2018-06-11 23:01 ` Paulo Zanoni
2018-05-24 23:42 ` [PATCH 30/24] drm/i915/icl: update VBT's child_device_config flags2 field Paulo Zanoni
2018-06-14 19:33 ` Rodrigo Vivi
2018-05-25 0:36 ` [PATCH 25/24] drm/i915/icl: fix gmbus gpio pin mapping Lucas De Marchi
2018-05-25 16:24 ` Ville Syrjälä
2018-05-25 16:26 ` Lucas De Marchi
2018-06-14 19:28 ` Rodrigo Vivi
2018-06-14 19:07 ` Rodrigo Vivi
2018-06-14 20:43 ` Paulo Zanoni
2018-05-24 23:59 ` ✗ Fi.CI.CHECKPATCH: warning for More ICL display patches (rev7) Patchwork
2018-05-25 0:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-05-25 0:14 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-05-25 0:49 ` ✗ Fi.CI.BAT: failure for More ICL display patches (rev8) Patchwork
2018-05-25 20:11 ` ✗ Fi.CI.BAT: failure for More ICL display patches (rev11) Patchwork
2018-06-01 23:22 ` [PATCH 00/24] More ICL display patches Paulo Zanoni
2018-06-13 21:49 ` ✗ Fi.CI.BAT: failure for More ICL display patches (rev12) Patchwork
2018-06-14 20:20 ` ✗ Fi.CI.BAT: failure for More ICL display patches (rev13) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1528933626.2793.4.camel@intel.com \
--to=paulo.r.zanoni@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=lucas.de.marchi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).