Re: [PATCH v2] drm/i915: Use crtc_state->has_psr instead of CAN_PSR for pipe update

[Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>]

On Mon, 2018-07-09 at 12:24 -0700, Rodrigo Vivi wrote:
> On Mon, Jul 09, 2018 at 11:30:00AM -0700, Dhinakaran Pandiyan wrote:
> > 
> > On Sun, 2018-07-08 at 18:46 -0700, Tarun Vyas wrote:
> > > 
> > > In commit "drm/i915: Wait for PSR exit before checking for vblank
> > > evasion", the idea was to limit the PSR IDLE checks when PSR is
> > > actually supported. While CAN_PSR does do that check, it doesn't
> > > applies on a per-crtc basis. crtc_state->has_psr is a more
> > > granular
> > > check that avoids everything but pipe A, for the PSR IDLE check.
> > > 
> > > With this, the PSR IDLE check should be a *no-op* for all but
> > > pipe A
> > > which is what was intended originally.
> > > 
> > So, the problem is when we update a non-PSR pipe (B or C) and PSR
> > is
> > active on another pipe(A, specifically), we end up waiting for the
> > pipe
> > A MMIO to become idle.
> > 
> > Can you please update the commit message as the commit message
> > makes
> > the per-pipe check sound like an optimization? 
> I truly doubt that multiple PSR pipes case doesn't work in our
> driver.
> if that works I'd assume it is by coincidence :P
> 
> > 
> > This also points to a gap in our testing, I don't see a two pipe
> > PSR
> > related IGT.
> The almost impossible mission here is to find any design with 2 eDP
> connectors and both panels with PSR.
> 
I meant, two pipes with PSR on one of them. I looked at the frontbuffer
_tracking@psr subtests in https://intel-gfx-ci.01.org/tree/drm-tip/drmt
ip.html, none of them were "2p". Ideally, a pipe update on a non-PSR
pipe would have triggered this failure in CI.


> > 
> > 
> > > 
> > > Fixes: a608987970b9 ("drm/i915: Wait for PSR exit before checking
> > > for
> > > vblank evasion")
> > > 
> > > v2: Remove unnecessary parantheses, make checkpatch happy.
> > > 
> > > Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > > Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/intel_sprite.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_sprite.c
> > > b/drivers/gpu/drm/i915/intel_sprite.c
> > > index 4990d6e84ddf..83880e3a5f3d 100644
> > > --- a/drivers/gpu/drm/i915/intel_sprite.c
> > > +++ b/drivers/gpu/drm/i915/intel_sprite.c
> > > @@ -118,7 +118,7 @@ void intel_pipe_update_start(const struct
> > > intel_crtc_state *new_crtc_state)
> > >  	 * VBL interrupts will start the PSR exit and prevent a
> > > PSR
> > >  	 * re-entry as well.
> > >  	 */
> > > -	if (CAN_PSR(dev_priv) &&
> > > intel_psr_wait_for_idle(dev_priv))
> > > +	if (new_crtc_state->has_psr &&
> > > intel_psr_wait_for_idle(dev_priv))
> > >  		DRM_ERROR("PSR idle timed out, atomic update may
> > > fail\n");
> > >  
> > >  	local_irq_disable();
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx