[PATCH v10 8/8] drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON

[Shashank Sharma <shashank.sharma@intel.com>]

LSPCON chips can generate YCBCR outputs, if asked nicely :).

In order to generate YCBCR 4:2:0 outputs, a source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:2:0 in AVI infoframes

Whereas for YCBCR 4:4:4 outputs, the source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:4:4 in AVI infoframes

So for both 4:2:0 as well as 4:4:4 outputs, we are driving the
pipe for YCBCR 4:4:4 output, but AVI infoframe's color space
information indicates LSPCON FW to start scaling down from YCBCR
4:4:4 and generate YCBCR 4:2:0 output. As the scaling is done by
LSPCON device, we need not to reserve a scaler for 4:2:0 outputs.

V2: rebase
V3: Addressed review comments from Ville
    - add enum crtc_output_format instead of bool ycbcr420
    - use crtc_output_format=4:4:4 for modeset of LSPCON 4:2:0 output
      cases in this way we will have YCBCR 4:4:4 framework ready (except
      the ABI part)
V4: Added r-b from Maarten (for v3)
    Addressed review comments from Ville:
    - Do not add a non-atomic state variable to determine lspcon output.
      Instead add bool in CRTC state to indicate lspcon based scaling.
V5: Addressed review comments from Ville:
    - Change the state bool name from external scaling to something more
      relavent.
    - Keep the info and adjusted_mode structures const.
    - use crtc_state instead of pipe_config.
    - Push all the config change into lspcon_ycbcr420_config function.
V6: Rebase, small changes to accommodate changes in patch 2.
V7: Fixed checkpatch warnings for alignment
V8: Rebase

    PS: Ignored following warnings to match the current formatting:
    drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
     -:53: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
    #53: FILE: drivers/gpu/drm/i915/i915_reg.h:8721:
    +#define  TRANS_MSA_SAMPLING_444        (2<<1)
                                          ^
    -:54: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
    #54: FILE: drivers/gpu/drm/i915/i915_reg.h:8722:
    +#define  TRANS_MSA_CLRSP_YCBCR         (2<<3)
V9: Rebase
V10: Rebase

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      |  2 ++
 drivers/gpu/drm/i915/intel_ddi.c     |  7 +++++++
 drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++
 drivers/gpu/drm/i915/intel_dp.c      |  4 ++++
 drivers/gpu/drm/i915/intel_drv.h     |  5 +++++
 drivers/gpu/drm/i915/intel_lspcon.c  | 26 ++++++++++++++++++++++++++
 6 files changed, 56 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 17575cf..f3e58a9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9241,6 +9241,8 @@ enum skl_power_gate {
 #define TRANS_MSA_MISC(tran) _MMIO_TRANS2(tran, _TRANSA_MSA_MISC)
 
 #define  TRANS_MSA_SYNC_CLK		(1 << 0)
+#define  TRANS_MSA_SAMPLING_444		(2 << 1)
+#define  TRANS_MSA_CLRSP_YCBCR		(2 << 3)
 #define  TRANS_MSA_6_BPC		(0 << 5)
 #define  TRANS_MSA_8_BPC		(1 << 5)
 #define  TRANS_MSA_10_BPC		(2 << 5)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 148bfaa..0db3e22 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1703,6 +1703,13 @@ void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state)
 		break;
 	}
 
+	/*
+	 * As per DP 1.2 spec section 2.3.4.3 while sending
+	 * YCBCR 444 signals we should program MSA MISC1/0 fields with
+	 * colorspace information. The output colorspace encoding is BT601.
+	 */
+	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
+		temp |= TRANS_MSA_SAMPLING_444 | TRANS_MSA_CLRSP_YCBCR;
 	I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3384129..883c897 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7827,6 +7827,8 @@ static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	enum intel_output_format output = INTEL_OUTPUT_FORMAT_RGB;
 
+	pipe_config->lspcon_downsampling = false;
+
 	if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
 		u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
 
@@ -7844,6 +7846,16 @@ static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,
 				else
 					output = INTEL_OUTPUT_FORMAT_YCBCR420;
 			} else {
+				/*
+				 * Currently there is no interface defined to
+				 * check user preference between RGB/YCBCR444
+				 * or YCBCR420. So the only possible case for
+				 * YCBCR444 usage is driving YCBCR420 output
+				 * with LSPCON, when pipe is configured for
+				 * YCBCR444 output and LSPCON takes care of
+				 * downsampling it.
+				 */
+				pipe_config->lspcon_downsampling = true;
 				output = INTEL_OUTPUT_FORMAT_YCBCR444;
 			}
 		}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5d907a2..ef355d9 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2000,6 +2000,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	struct intel_lspcon *lspcon = enc_to_intel_lspcon(&encoder->base);
 	enum port port = encoder->port;
 	struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
@@ -2012,6 +2013,9 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 		pipe_config->has_pch_encoder = true;
 
 	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
+	if (lspcon->active)
+		lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
+
 	pipe_config->has_drrs = false;
 	if (IS_G4X(dev_priv) || port == PORT_A)
 		pipe_config->has_audio = false;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 2cc0775..9f3499b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -904,6 +904,9 @@ struct intel_crtc_state {
 
 	/* Output format RGB/YCBCR etc */
 	enum intel_output_format output_format;
+
+	/* Output down scaling is done in LSPCON device */
+	bool lspcon_downsampling;
 };
 
 struct intel_crtc {
@@ -2203,6 +2206,8 @@ void lspcon_set_infoframes(struct drm_encoder *encoder,
 			   const struct drm_connector_state *conn_state);
 bool lspcon_infoframe_enabled(struct drm_encoder *encoder,
 			      const struct intel_crtc_state *pipe_config);
+void lspcon_ycbcr420_config(struct drm_connector *connector,
+			    struct intel_crtc_state *crtc_state);
 
 /* intel_pipe_crc.c */
 #ifdef CONFIG_DEBUG_FS
diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index 8e0477e..447b454 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -180,6 +180,21 @@ static bool lspcon_wake_native_aux_ch(struct intel_lspcon *lspcon)
 	return true;
 }
 
+void lspcon_ycbcr420_config(struct drm_connector *connector,
+			    struct intel_crtc_state *crtc_state)
+{
+	const struct drm_display_info *info = &connector->display_info;
+	const struct drm_display_mode *adjusted_mode =
+					&crtc_state->base.adjusted_mode;
+
+	if (drm_mode_is_420_only(info, adjusted_mode) &&
+	    connector->ycbcr_420_allowed) {
+		crtc_state->port_clock /= 2;
+		crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR444;
+		crtc_state->lspcon_downsampling = true;
+	}
+}
+
 static bool lspcon_probe(struct intel_lspcon *lspcon)
 {
 	int retry;
@@ -465,6 +480,15 @@ void lspcon_set_infoframes(struct drm_encoder *encoder,
 		return;
 	}
 
+	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) {
+		if (crtc_state->lspcon_downsampling)
+			frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
+		else
+			frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
+	} else {
+		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
+	}
+
 	drm_hdmi_avi_infoframe_quant_range(&frame.avi, mode,
 					   crtc_state->limited_color_range ?
 					   HDMI_QUANTIZATION_RANGE_LIMITED :
@@ -518,6 +542,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)
 	struct intel_lspcon *lspcon = &intel_dig_port->lspcon;
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct drm_connector *connector = &dp->attached_connector->base;
 
 	if (!HAS_LSPCON(dev_priv)) {
 		DRM_ERROR("LSPCON is not supported on this platform\n");
@@ -542,6 +567,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)
 		return false;
 	}
 
+	connector->ycbcr_420_allowed = true;
 	lspcon->active = true;
 	DRM_DEBUG_KMS("Success: LSPCON init\n");
 	return true;
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx