[PATCH v10 0/8] YCBCR 4:2:0/4:4:4 output support for LSPCON

[PATCH v10 0/8] YCBCR 4:2:0/4:4:4 output support for LSPCON

[Shashank Sharma]

This patch series does the following:
- Adds concept of CRTC output format, which indicates if a CRTC is
  driving RGB/YCBCR4:4:4/YCBCR4:2:0 or other outputs.
- Sets RGB as default output for all displays.
- Enables YCBCR4:4:4/4:2:0 outputs for LSPCON displays
- Drives these outputs on LSPCON using this CRTC output framework.

Sharma, Shashank (2):
  drm/i915: Check LSPCON vendor OUI
  drm/i915: Write AVI infoframes for MCA LSPCON

Shashank Sharma (6):
  drm/i915: Introduce CRTC output format
  drm/i915: Add CRTC output format YCBCR 4:2:0
  drm/i915: Add CRTC output format YCBCR 4:4:4
  drm/i915: Add AVI infoframe support for LSPCON
  drm/i915: Write AVI infoframes for Parade LSPCON
  drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON

 drivers/gpu/drm/i915/i915_reg.h      |   2 +
 drivers/gpu/drm/i915/intel_color.c   |   3 +-
 drivers/gpu/drm/i915/intel_crt.c     |   3 +
 drivers/gpu/drm/i915/intel_ddi.c     |  28 ++-
 drivers/gpu/drm/i915/intel_display.c | 104 ++++++++---
 drivers/gpu/drm/i915/intel_dp.c      |   5 +
 drivers/gpu/drm/i915/intel_dp_mst.c  |   1 +
 drivers/gpu/drm/i915/intel_drv.h     |  39 +++-
 drivers/gpu/drm/i915/intel_dvo.c     |   1 +
 drivers/gpu/drm/i915/intel_hdmi.c    |  24 ++-
 drivers/gpu/drm/i915/intel_lspcon.c  | 348 +++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_lvds.c    |   2 +
 drivers/gpu/drm/i915/intel_panel.c   |   2 +-
 drivers/gpu/drm/i915/intel_sdvo.c    |   1 +
 drivers/gpu/drm/i915/intel_tv.c      |   1 +
 drivers/gpu/drm/i915/vlv_dsi.c       |   1 +
 16 files changed, 507 insertions(+), 58 deletions(-)

-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v10 1/8] drm/i915: Introduce CRTC output format

[Shashank Sharma]

This patch adds an enum "intel_output_format" to represent
the output format of a particular CRTC. This enum will be
used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format
during the atomic modeset calculations.

V5:
- Created this separate patch to introduce and init output_format.
- Initialize parameters of output_format_str respectively (Jani N).
- Call it intel_output_format than crtc_output_format(Ville).
- Set output format in pipe_config for every encoder (Ville).
- Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville)

V6: Rebase
V7: Fixed alignment warnings (checkpatch)
V8: Another check[atch warning for alignment
V9: Rebase
V10: Rebase on top of DSI restructure

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/intel_crt.c     |  3 +++
 drivers/gpu/drm/i915/intel_display.c | 17 +++++++++++++++++
 drivers/gpu/drm/i915/intel_dp.c      |  1 +
 drivers/gpu/drm/i915/intel_dp_mst.c  |  1 +
 drivers/gpu/drm/i915/intel_drv.h     |  8 ++++++++
 drivers/gpu/drm/i915/intel_dvo.c     |  1 +
 drivers/gpu/drm/i915/intel_hdmi.c    |  1 +
 drivers/gpu/drm/i915/intel_lvds.c    |  2 ++
 drivers/gpu/drm/i915/intel_sdvo.c    |  1 +
 drivers/gpu/drm/i915/intel_tv.c      |  1 +
 drivers/gpu/drm/i915/vlv_dsi.c       |  1 +
 11 files changed, 37 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 0c6bf82..e85963c 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -354,6 +354,7 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return false;
 
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	return true;
 }
 
@@ -368,6 +369,7 @@ static bool pch_crt_compute_config(struct intel_encoder *encoder,
 		return false;
 
 	pipe_config->has_pch_encoder = true;
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 
 	return true;
 }
@@ -389,6 +391,7 @@ static bool hsw_crt_compute_config(struct intel_encoder *encoder,
 		return false;
 
 	pipe_config->has_pch_encoder = true;
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 
 	/* LPT FDI RX only supports 8bpc. */
 	if (HAS_PCH_LPT(dev_priv)) {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cd5f1e75..5e5bc06 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9535,6 +9535,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 		}
 	}
 
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
 	if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
 		power_domain_mask |= BIT_ULL(power_domain);
@@ -10882,6 +10883,18 @@ static void snprintf_output_types(char *buf, size_t len,
 	WARN_ON_ONCE(output_types != 0);
 }
 
+static const char * const output_format_str[] = {
+	[INTEL_OUTPUT_FORMAT_INVALID] = "Invalid",
+	[INTEL_OUTPUT_FORMAT_RGB] = "RGB",
+};
+
+static const char *output_formats(enum intel_output_format format)
+{
+	if (format != INTEL_OUTPUT_FORMAT_RGB)
+		format = INTEL_OUTPUT_FORMAT_INVALID;
+	return output_format_str[format];
+}
+
 static void intel_dump_pipe_config(struct intel_crtc *crtc,
 				   struct intel_crtc_state *pipe_config,
 				   const char *context)
@@ -10901,6 +10914,9 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 	DRM_DEBUG_KMS("output_types: %s (0x%x)\n",
 		      buf, pipe_config->output_types);
 
+	DRM_DEBUG_KMS("output format: %s\n",
+		      output_formats(pipe_config->output_format));
+
 	DRM_DEBUG_KMS("cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n",
 		      transcoder_name(pipe_config->cpu_transcoder),
 		      pipe_config->pipe_bpp, pipe_config->dither);
@@ -11490,6 +11506,7 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
 	PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_end);
 
 	PIPE_CONF_CHECK_I(pixel_multiplier);
+	PIPE_CONF_CHECK_I(output_format);
 	PIPE_CONF_CHECK_BOOL(has_hdmi_sink);
 	if ((INTEL_GEN(dev_priv) < 8 && !IS_HASWELL(dev_priv)) ||
 	    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 8e0e14b..5d907a2 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2011,6 +2011,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A)
 		pipe_config->has_pch_encoder = true;
 
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	pipe_config->has_drrs = false;
 	if (IS_G4X(dev_priv) || port == PORT_A)
 		pipe_config->has_audio = false;
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 352e521..04da555 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -51,6 +51,7 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return false;
 
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	pipe_config->has_pch_encoder = false;
 	bpp = 24;
 	if (intel_dp->compliance.test_data.bpc) {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 7b984ae..f704720 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -708,6 +708,11 @@ struct intel_crtc_wm_state {
 	bool need_postvbl_update;
 };
 
+enum intel_output_format {
+	INTEL_OUTPUT_FORMAT_INVALID,
+	INTEL_OUTPUT_FORMAT_RGB,
+};
+
 struct intel_crtc_state {
 	struct drm_crtc_state base;
 
@@ -897,6 +902,9 @@ struct intel_crtc_state {
 
 	/* output format is YCBCR 4:2:0 */
 	bool ycbcr420;
+
+	/* Output format RGB/YCBCR etc */
+	enum intel_output_format output_format;
 };
 
 struct intel_crtc {
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 4e142ff..5bb4ba9 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -256,6 +256,7 @@ static bool intel_dvo_compute_config(struct intel_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return false;
 
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	return true;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 8363fbd..8993e66 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1699,6 +1699,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return false;
 
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	pipe_config->has_hdmi_sink = !force_dvi && intel_hdmi->has_hdmi_sink;
 
 	if (pipe_config->has_hdmi_sink)
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f9f3b08..9755c9e 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -418,6 +418,8 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 		pipe_config->pipe_bpp = lvds_bpp;
 	}
 
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
+
 	/*
 	 * We have timings from the BIOS for the panel, put them in
 	 * to the adjusted mode.  The CRTC will be set up for this mode,
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 812fe7b..005ca08 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1132,6 +1132,7 @@ static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
 
 	DRM_DEBUG_KMS("forcing bpc to 8 for SDVO\n");
 	pipe_config->pipe_bpp = 8*3;
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 
 	if (HAS_PCH_SPLIT(to_i915(encoder->base.dev)))
 		pipe_config->has_pch_encoder = true;
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index b5b04cb..5f5e3f8 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -885,6 +885,7 @@ intel_tv_compute_config(struct intel_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return false;
 
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	adjusted_mode->crtc_clock = tv_mode->clock;
 	DRM_DEBUG_KMS("forcing bpc to 8 for TV\n");
 	pipe_config->pipe_bpp = 8*3;
diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
index 435a2c3..552c876f 100644
--- a/drivers/gpu/drm/i915/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/vlv_dsi.c
@@ -314,6 +314,7 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
 	int ret;
 
 	DRM_DEBUG_KMS("\n");
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 
 	if (fixed_mode) {
 		intel_fixed_panel_mode(fixed_mode, adjusted_mode);
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v10 1/8] drm/i915: Introduce CRTC output format

[Ville Syrjälä]

On Tue, Aug 14, 2018 at 03:23:19PM +0530, Shashank Sharma wrote:
> This patch adds an enum "intel_output_format" to represent
> the output format of a particular CRTC. This enum will be
> used to produce a RGB/YCBCR4:4:4/YCBCR4:2:0 output format
> during the atomic modeset calculations.
> 
> V5:
> - Created this separate patch to introduce and init output_format.
> - Initialize parameters of output_format_str respectively (Jani N).
> - Call it intel_output_format than crtc_output_format(Ville).
> - Set output format in pipe_config for every encoder (Ville).
> - Get rid of extra DRM_DEBUG_KMS during get_pipe_config (Ville)
> 
> V6: Rebase
> V7: Fixed alignment warnings (checkpatch)
> V8: Another check[atch warning for alignment
> V9: Rebase
> V10: Rebase on top of DSI restructure
> 
> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_crt.c     |  3 +++
>  drivers/gpu/drm/i915/intel_display.c | 17 +++++++++++++++++
>  drivers/gpu/drm/i915/intel_dp.c      |  1 +
>  drivers/gpu/drm/i915/intel_dp_mst.c  |  1 +
>  drivers/gpu/drm/i915/intel_drv.h     |  8 ++++++++
>  drivers/gpu/drm/i915/intel_dvo.c     |  1 +
>  drivers/gpu/drm/i915/intel_hdmi.c    |  1 +
>  drivers/gpu/drm/i915/intel_lvds.c    |  2 ++
>  drivers/gpu/drm/i915/intel_sdvo.c    |  1 +
>  drivers/gpu/drm/i915/intel_tv.c      |  1 +
>  drivers/gpu/drm/i915/vlv_dsi.c       |  1 +
>  11 files changed, 37 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
> index 0c6bf82..e85963c 100644
> --- a/drivers/gpu/drm/i915/intel_crt.c
> +++ b/drivers/gpu/drm/i915/intel_crt.c
> @@ -354,6 +354,7 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return false;
>  
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	return true;
>  }
>  
> @@ -368,6 +369,7 @@ static bool pch_crt_compute_config(struct intel_encoder *encoder,
>  		return false;
>  
>  	pipe_config->has_pch_encoder = true;
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  
>  	return true;
>  }
> @@ -389,6 +391,7 @@ static bool hsw_crt_compute_config(struct intel_encoder *encoder,
>  		return false;
>  
>  	pipe_config->has_pch_encoder = true;
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  
>  	/* LPT FDI RX only supports 8bpc. */
>  	if (HAS_PCH_LPT(dev_priv)) {
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index cd5f1e75..5e5bc06 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -9535,6 +9535,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
>  		}
>  	}
>  
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;

Looks like we're missing this for pre-hsw.

With that fixed
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

>  	power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
>  	if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
>  		power_domain_mask |= BIT_ULL(power_domain);
> @@ -10882,6 +10883,18 @@ static void snprintf_output_types(char *buf, size_t len,
>  	WARN_ON_ONCE(output_types != 0);
>  }
>  
> +static const char * const output_format_str[] = {
> +	[INTEL_OUTPUT_FORMAT_INVALID] = "Invalid",
> +	[INTEL_OUTPUT_FORMAT_RGB] = "RGB",
> +};
> +
> +static const char *output_formats(enum intel_output_format format)
> +{
> +	if (format != INTEL_OUTPUT_FORMAT_RGB)
> +		format = INTEL_OUTPUT_FORMAT_INVALID;
> +	return output_format_str[format];
> +}
> +
>  static void intel_dump_pipe_config(struct intel_crtc *crtc,
>  				   struct intel_crtc_state *pipe_config,
>  				   const char *context)
> @@ -10901,6 +10914,9 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
>  	DRM_DEBUG_KMS("output_types: %s (0x%x)\n",
>  		      buf, pipe_config->output_types);
>  
> +	DRM_DEBUG_KMS("output format: %s\n",
> +		      output_formats(pipe_config->output_format));
> +
>  	DRM_DEBUG_KMS("cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n",
>  		      transcoder_name(pipe_config->cpu_transcoder),
>  		      pipe_config->pipe_bpp, pipe_config->dither);
> @@ -11490,6 +11506,7 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
>  	PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_end);
>  
>  	PIPE_CONF_CHECK_I(pixel_multiplier);
> +	PIPE_CONF_CHECK_I(output_format);
>  	PIPE_CONF_CHECK_BOOL(has_hdmi_sink);
>  	if ((INTEL_GEN(dev_priv) < 8 && !IS_HASWELL(dev_priv)) ||
>  	    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 8e0e14b..5d907a2 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -2011,6 +2011,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  	if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A)
>  		pipe_config->has_pch_encoder = true;
>  
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	pipe_config->has_drrs = false;
>  	if (IS_G4X(dev_priv) || port == PORT_A)
>  		pipe_config->has_audio = false;
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> index 352e521..04da555 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -51,6 +51,7 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return false;
>  
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	pipe_config->has_pch_encoder = false;
>  	bpp = 24;
>  	if (intel_dp->compliance.test_data.bpc) {
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 7b984ae..f704720 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -708,6 +708,11 @@ struct intel_crtc_wm_state {
>  	bool need_postvbl_update;
>  };
>  
> +enum intel_output_format {
> +	INTEL_OUTPUT_FORMAT_INVALID,
> +	INTEL_OUTPUT_FORMAT_RGB,
> +};
> +
>  struct intel_crtc_state {
>  	struct drm_crtc_state base;
>  
> @@ -897,6 +902,9 @@ struct intel_crtc_state {
>  
>  	/* output format is YCBCR 4:2:0 */
>  	bool ycbcr420;
> +
> +	/* Output format RGB/YCBCR etc */
> +	enum intel_output_format output_format;
>  };
>  
>  struct intel_crtc {
> diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
> index 4e142ff..5bb4ba9 100644
> --- a/drivers/gpu/drm/i915/intel_dvo.c
> +++ b/drivers/gpu/drm/i915/intel_dvo.c
> @@ -256,6 +256,7 @@ static bool intel_dvo_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return false;
>  
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	return true;
>  }
>  
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 8363fbd..8993e66 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1699,6 +1699,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return false;
>  
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	pipe_config->has_hdmi_sink = !force_dvi && intel_hdmi->has_hdmi_sink;
>  
>  	if (pipe_config->has_hdmi_sink)
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index f9f3b08..9755c9e 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -418,6 +418,8 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
>  		pipe_config->pipe_bpp = lvds_bpp;
>  	}
>  
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> +
>  	/*
>  	 * We have timings from the BIOS for the panel, put them in
>  	 * to the adjusted mode.  The CRTC will be set up for this mode,
> diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
> index 812fe7b..005ca08 100644
> --- a/drivers/gpu/drm/i915/intel_sdvo.c
> +++ b/drivers/gpu/drm/i915/intel_sdvo.c
> @@ -1132,6 +1132,7 @@ static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
>  
>  	DRM_DEBUG_KMS("forcing bpc to 8 for SDVO\n");
>  	pipe_config->pipe_bpp = 8*3;
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  
>  	if (HAS_PCH_SPLIT(to_i915(encoder->base.dev)))
>  		pipe_config->has_pch_encoder = true;
> diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
> index b5b04cb..5f5e3f8 100644
> --- a/drivers/gpu/drm/i915/intel_tv.c
> +++ b/drivers/gpu/drm/i915/intel_tv.c
> @@ -885,6 +885,7 @@ intel_tv_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return false;
>  
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	adjusted_mode->crtc_clock = tv_mode->clock;
>  	DRM_DEBUG_KMS("forcing bpc to 8 for TV\n");
>  	pipe_config->pipe_bpp = 8*3;
> diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
> index 435a2c3..552c876f 100644
> --- a/drivers/gpu/drm/i915/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/vlv_dsi.c
> @@ -314,6 +314,7 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
>  	int ret;
>  
>  	DRM_DEBUG_KMS("\n");
> +	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  
>  	if (fixed_mode) {
>  		intel_fixed_panel_mode(fixed_mode, adjusted_mode);
> -- 
> 2.7.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v10 2/8] drm/i915: Add CRTC output format YCBCR 4:2:0

[Shashank Sharma]

Currently, we are using a bool in CRTC state (state->ycbcr420),
to indicate modeset, that the output format is YCBCR 4:2:0. Now in
order to support other YCBCR formats, we will need more such flags.

This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the
CRTC output formats and then plugs it during the modeset.

V3: Added this patch in the series, to address review comments from
    second patchset.
V4: Added r-b from Maarten (on v3)
    Addressed review comments from Ville:
        - Change the enum name to intel_output_format.
        - Start the enum value (INVALID) from 0 instaed of 1.
        - Set the crtc's output_format to RGB in encoder's compute_config.
V5: Broke previous patch 1 into two parts,
    - first patch to add CRTC output format in general
    - second patch (this one) to add YCBCR 4:2:0 output
      format specifically.
    - Use ARRAY_SIZE(format_str) for output format validity check (Ville)
V6: Added a separate function to calculate crtc_state->output_format, and
    calling it from various get_config function (Fix CI build warning)
V7: Fixed checkpatch warnings for alignment
V8: Rebase
V9: Rebase
V10: Rebase

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/intel_color.c   |  2 +-
 drivers/gpu/drm/i915/intel_ddi.c     |  2 +-
 drivers/gpu/drm/i915/intel_display.c | 72 +++++++++++++++++++++---------------
 drivers/gpu/drm/i915/intel_drv.h     |  4 +-
 drivers/gpu/drm/i915/intel_hdmi.c    |  6 +--
 drivers/gpu/drm/i915/intel_panel.c   |  2 +-
 6 files changed, 50 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
index c6a7bea..bf9d8f6 100644
--- a/drivers/gpu/drm/i915/intel_color.c
+++ b/drivers/gpu/drm/i915/intel_color.c
@@ -149,7 +149,7 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)
 	if (INTEL_GEN(dev_priv) >= 8 || IS_HASWELL(dev_priv))
 		limited_color_range = intel_crtc_state->limited_color_range;
 
-	if (intel_crtc_state->ycbcr420) {
+	if (intel_crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
 		ilk_load_ycbcr_conversion_matrix(intel_crtc);
 		return;
 	} else if (crtc_state->ctm) {
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 0adc043..a036fe6 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1442,7 +1442,7 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
 	else
 		dotclock = pipe_config->port_clock;
 
-	if (pipe_config->ycbcr420)
+	if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
 		dotclock *= 2;
 
 	if (pipe_config->pixel_multiplier)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5e5bc06..e2a1e4f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4811,7 +4811,8 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
 		if (pixel_format == DRM_FORMAT_NV12)
 			need_scaling = true;
 
-	if (crtc_state->ycbcr420 && scaler_user == SKL_CRTC_INDEX)
+	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
+	    scaler_user == SKL_CRTC_INDEX)
 		need_scaling = true;
 
 	/*
@@ -6620,7 +6621,8 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
 		return -EINVAL;
 	}
 
-	if (pipe_config->ycbcr420 && pipe_config->base.ctm) {
+	if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
+	    pipe_config->base.ctm) {
 		/*
 		 * There is only one pipe CSC unit per pipe, and we need that
 		 * for output conversion from RGB->YCBCR. So if CTM is already
@@ -7818,6 +7820,35 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc,
 	pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
 }
 
+static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,
+					struct intel_crtc_state *pipe_config)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	enum intel_output_format output = INTEL_OUTPUT_FORMAT_RGB;
+
+	if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
+		u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
+
+		if (tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV) {
+			bool ycbcr420_enabled = tmp & PIPEMISC_YUV420_ENABLE;
+			bool blend = tmp & PIPEMISC_YUV420_MODE_FULL_BLEND;
+
+			if (ycbcr420_enabled) {
+				/* We support 4:2:0 in full blend mode only */
+				if (!blend)
+					output = INTEL_OUTPUT_FORMAT_INVALID;
+				else if (!(IS_GEMINILAKE(dev_priv) ||
+					   INTEL_GEN(dev_priv) >= 10))
+					output = INTEL_OUTPUT_FORMAT_INVALID;
+				else
+					output = INTEL_OUTPUT_FORMAT_YCBCR420;
+			}
+		}
+	}
+
+	pipe_config->output_format = output;
+}
+
 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 				 struct intel_crtc_state *pipe_config)
 {
@@ -7865,6 +7896,7 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 
 	intel_get_pipe_timings(crtc, pipe_config);
 	intel_get_pipe_src_size(crtc, pipe_config);
+	intel_get_crtc_ycbcr_config(crtc, pipe_config);
 
 	i9xx_get_pfit_config(crtc, pipe_config);
 
@@ -8452,10 +8484,10 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
 		if (intel_crtc->config->dither)
 			val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
 
-		if (config->ycbcr420) {
-			val |= PIPEMISC_OUTPUT_COLORSPACE_YUV |
-				PIPEMISC_YUV420_ENABLE |
-				PIPEMISC_YUV420_MODE_FULL_BLEND;
+		if (config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
+			val |= PIPEMISC_OUTPUT_COLORSPACE_YUV;
+			val |= PIPEMISC_YUV420_ENABLE |
+			       PIPEMISC_YUV420_MODE_FULL_BLEND;
 		}
 
 		I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
@@ -8953,6 +8985,7 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 
 	intel_get_pipe_timings(crtc, pipe_config);
 	intel_get_pipe_src_size(crtc, pipe_config);
+	intel_get_crtc_ycbcr_config(crtc, pipe_config);
 
 	ironlake_get_pfit_config(crtc, pipe_config);
 
@@ -9514,28 +9547,11 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 	}
 
 	intel_get_pipe_src_size(crtc, pipe_config);
+	intel_get_crtc_ycbcr_config(crtc, pipe_config);
 
 	pipe_config->gamma_mode =
 		I915_READ(GAMMA_MODE(crtc->pipe)) & GAMMA_MODE_MODE_MASK;
 
-	if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
-		u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
-		bool clrspace_yuv = tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV;
-
-		if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
-			bool blend_mode_420 = tmp &
-					      PIPEMISC_YUV420_MODE_FULL_BLEND;
-
-			pipe_config->ycbcr420 = tmp & PIPEMISC_YUV420_ENABLE;
-			if (pipe_config->ycbcr420 != clrspace_yuv ||
-			    pipe_config->ycbcr420 != blend_mode_420)
-				DRM_DEBUG_KMS("Bad 4:2:0 mode (%08x)\n", tmp);
-		} else if (clrspace_yuv) {
-			DRM_DEBUG_KMS("YCbCr 4:2:0 Unsupported\n");
-		}
-	}
-
-	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 	power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
 	if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
 		power_domain_mask |= BIT_ULL(power_domain);
@@ -10886,11 +10902,13 @@ static void snprintf_output_types(char *buf, size_t len,
 static const char * const output_format_str[] = {
 	[INTEL_OUTPUT_FORMAT_INVALID] = "Invalid",
 	[INTEL_OUTPUT_FORMAT_RGB] = "RGB",
+	[INTEL_OUTPUT_FORMAT_YCBCR420] = "YCBCR4:2:0",
 };
 
 static const char *output_formats(enum intel_output_format format)
 {
-	if (format != INTEL_OUTPUT_FORMAT_RGB)
+	if (format < INTEL_OUTPUT_FORMAT_RGB ||
+	    format > ARRAY_SIZE(output_format_str))
 		format = INTEL_OUTPUT_FORMAT_INVALID;
 	return output_format_str[format];
 }
@@ -10926,9 +10944,6 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 				      pipe_config->fdi_lanes,
 				      &pipe_config->fdi_m_n);
 
-	if (pipe_config->ycbcr420)
-		DRM_DEBUG_KMS("YCbCr 4:2:0 output enabled\n");
-
 	if (intel_crtc_has_dp_encoder(pipe_config)) {
 		intel_dump_m_n_config(pipe_config, "dp m_n",
 				pipe_config->lane_count, &pipe_config->dp_m_n);
@@ -11515,7 +11530,6 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
 	PIPE_CONF_CHECK_BOOL(hdmi_scrambling);
 	PIPE_CONF_CHECK_BOOL(hdmi_high_tmds_clock_ratio);
 	PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_infoframe);
-	PIPE_CONF_CHECK_BOOL(ycbcr420);
 
 	PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_audio);
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index f704720..cc7a46e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -711,6 +711,7 @@ struct intel_crtc_wm_state {
 enum intel_output_format {
 	INTEL_OUTPUT_FORMAT_INVALID,
 	INTEL_OUTPUT_FORMAT_RGB,
+	INTEL_OUTPUT_FORMAT_YCBCR420,
 };
 
 struct intel_crtc_state {
@@ -900,9 +901,6 @@ struct intel_crtc_state {
 	/* HDMI High TMDS char rate ratio */
 	bool hdmi_high_tmds_clock_ratio;
 
-	/* output format is YCBCR 4:2:0 */
-	bool ycbcr420;
-
 	/* Output format RGB/YCBCR etc */
 	enum intel_output_format output_format;
 };
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 8993e66..f1259a9 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -486,7 +486,7 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
 		return;
 	}
 
-	if (crtc_state->ycbcr420)
+	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
 		frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
 	else
 		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
@@ -1620,7 +1620,7 @@ static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
 		if (connector_state->crtc != crtc_state->base.crtc)
 			continue;
 
-		if (crtc_state->ycbcr420) {
+		if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
 			const struct drm_hdmi_info *hdmi = &info->hdmi;
 
 			if (bpc == 12 && !(hdmi->y420_dc_modes &
@@ -1665,7 +1665,7 @@ intel_hdmi_ycbcr420_config(struct drm_connector *connector,
 	*clock_12bpc /= 2;
 	*clock_10bpc /= 2;
 	*clock_8bpc /= 2;
-	config->ycbcr420 = true;
+	config->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
 
 	/* YCBCR 420 output conversion needs a scaler */
 	if (skl_update_scaler_crtc(config)) {
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 4a9f139..5cca04a 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -111,7 +111,7 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
 	/* Native modes don't need fitting */
 	if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w &&
 	    adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h &&
-	    !pipe_config->ycbcr420)
+	    pipe_config->output_format != INTEL_OUTPUT_FORMAT_YCBCR420)
 		goto done;
 
 	switch (fitting_mode) {
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v10 2/8] drm/i915: Add CRTC output format YCBCR 4:2:0

[Ville Syrjälä]

On Tue, Aug 14, 2018 at 03:23:20PM +0530, Shashank Sharma wrote:
> Currently, we are using a bool in CRTC state (state->ycbcr420),
> to indicate modeset, that the output format is YCBCR 4:2:0. Now in
> order to support other YCBCR formats, we will need more such flags.
> 
> This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the
> CRTC output formats and then plugs it during the modeset.
> 
> V3: Added this patch in the series, to address review comments from
>     second patchset.
> V4: Added r-b from Maarten (on v3)
>     Addressed review comments from Ville:
>         - Change the enum name to intel_output_format.
>         - Start the enum value (INVALID) from 0 instaed of 1.
>         - Set the crtc's output_format to RGB in encoder's compute_config.
> V5: Broke previous patch 1 into two parts,
>     - first patch to add CRTC output format in general
>     - second patch (this one) to add YCBCR 4:2:0 output
>       format specifically.
>     - Use ARRAY_SIZE(format_str) for output format validity check (Ville)
> V6: Added a separate function to calculate crtc_state->output_format, and
>     calling it from various get_config function (Fix CI build warning)
> V7: Fixed checkpatch warnings for alignment
> V8: Rebase
> V9: Rebase
> V10: Rebase
> 
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_color.c   |  2 +-
>  drivers/gpu/drm/i915/intel_ddi.c     |  2 +-
>  drivers/gpu/drm/i915/intel_display.c | 72 +++++++++++++++++++++---------------
>  drivers/gpu/drm/i915/intel_drv.h     |  4 +-
>  drivers/gpu/drm/i915/intel_hdmi.c    |  6 +--
>  drivers/gpu/drm/i915/intel_panel.c   |  2 +-
>  6 files changed, 50 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
> index c6a7bea..bf9d8f6 100644
> --- a/drivers/gpu/drm/i915/intel_color.c
> +++ b/drivers/gpu/drm/i915/intel_color.c
> @@ -149,7 +149,7 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)
>  	if (INTEL_GEN(dev_priv) >= 8 || IS_HASWELL(dev_priv))
>  		limited_color_range = intel_crtc_state->limited_color_range;
>  
> -	if (intel_crtc_state->ycbcr420) {
> +	if (intel_crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
>  		ilk_load_ycbcr_conversion_matrix(intel_crtc);
>  		return;
>  	} else if (crtc_state->ctm) {
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 0adc043..a036fe6 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1442,7 +1442,7 @@ static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
>  	else
>  		dotclock = pipe_config->port_clock;
>  
> -	if (pipe_config->ycbcr420)
> +	if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
>  		dotclock *= 2;
>  
>  	if (pipe_config->pixel_multiplier)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 5e5bc06..e2a1e4f 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4811,7 +4811,8 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
>  		if (pixel_format == DRM_FORMAT_NV12)
>  			need_scaling = true;
>  
> -	if (crtc_state->ycbcr420 && scaler_user == SKL_CRTC_INDEX)
> +	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
> +	    scaler_user == SKL_CRTC_INDEX)
>  		need_scaling = true;
>  
>  	/*
> @@ -6620,7 +6621,8 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
>  		return -EINVAL;
>  	}
>  
> -	if (pipe_config->ycbcr420 && pipe_config->base.ctm) {
> +	if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
> +	    pipe_config->base.ctm) {
>  		/*
>  		 * There is only one pipe CSC unit per pipe, and we need that
>  		 * for output conversion from RGB->YCBCR. So if CTM is already
> @@ -7818,6 +7820,35 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc,
>  	pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
>  }
>  
> +static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,
> +					struct intel_crtc_state *pipe_config)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +	enum intel_output_format output = INTEL_OUTPUT_FORMAT_RGB;
> +
> +	if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
> +		u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
> +
> +		if (tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV) {
> +			bool ycbcr420_enabled = tmp & PIPEMISC_YUV420_ENABLE;
> +			bool blend = tmp & PIPEMISC_YUV420_MODE_FULL_BLEND;
> +
> +			if (ycbcr420_enabled) {
> +				/* We support 4:2:0 in full blend mode only */
> +				if (!blend)
> +					output = INTEL_OUTPUT_FORMAT_INVALID;
> +				else if (!(IS_GEMINILAKE(dev_priv) ||
> +					   INTEL_GEN(dev_priv) >= 10))
> +					output = INTEL_OUTPUT_FORMAT_INVALID;
> +				else
> +					output = INTEL_OUTPUT_FORMAT_YCBCR420;
> +			}
> +		}
> +	}
> +
> +	pipe_config->output_format = output;
> +}
> +
>  static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
>  				 struct intel_crtc_state *pipe_config)
>  {
> @@ -7865,6 +7896,7 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
>  
>  	intel_get_pipe_timings(crtc, pipe_config);
>  	intel_get_pipe_src_size(crtc, pipe_config);
> +	intel_get_crtc_ycbcr_config(crtc, pipe_config);

That function is bdw+ only actually, so not much point in calling it
here. Just need the patch 1 to be fixed to correcly set output_type=RGB.

We'll need to come up with another way to detect the output_format when
we start to do yuv output on pre-bdw.

>  
>  	i9xx_get_pfit_config(crtc, pipe_config);
>  
> @@ -8452,10 +8484,10 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
>  		if (intel_crtc->config->dither)
>  			val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
>  
> -		if (config->ycbcr420) {
> -			val |= PIPEMISC_OUTPUT_COLORSPACE_YUV |
> -				PIPEMISC_YUV420_ENABLE |
> -				PIPEMISC_YUV420_MODE_FULL_BLEND;
> +		if (config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
> +			val |= PIPEMISC_OUTPUT_COLORSPACE_YUV;
> +			val |= PIPEMISC_YUV420_ENABLE |
> +			       PIPEMISC_YUV420_MODE_FULL_BLEND;
>  		}
>  
>  		I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
> @@ -8953,6 +8985,7 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
>  
>  	intel_get_pipe_timings(crtc, pipe_config);
>  	intel_get_pipe_src_size(crtc, pipe_config);
> +	intel_get_crtc_ycbcr_config(crtc, pipe_config);

ditto

>  
>  	ironlake_get_pfit_config(crtc, pipe_config);
>  
> @@ -9514,28 +9547,11 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
>  	}
>  
>  	intel_get_pipe_src_size(crtc, pipe_config);
> +	intel_get_crtc_ycbcr_config(crtc, pipe_config);
>  
>  	pipe_config->gamma_mode =
>  		I915_READ(GAMMA_MODE(crtc->pipe)) & GAMMA_MODE_MODE_MASK;
>  
> -	if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
> -		u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
> -		bool clrspace_yuv = tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV;
> -
> -		if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10) {
> -			bool blend_mode_420 = tmp &
> -					      PIPEMISC_YUV420_MODE_FULL_BLEND;
> -
> -			pipe_config->ycbcr420 = tmp & PIPEMISC_YUV420_ENABLE;
> -			if (pipe_config->ycbcr420 != clrspace_yuv ||
> -			    pipe_config->ycbcr420 != blend_mode_420)
> -				DRM_DEBUG_KMS("Bad 4:2:0 mode (%08x)\n", tmp);
> -		} else if (clrspace_yuv) {
> -			DRM_DEBUG_KMS("YCbCr 4:2:0 Unsupported\n");
> -		}
> -	}
> -
> -	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
>  	if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
>  		power_domain_mask |= BIT_ULL(power_domain);
> @@ -10886,11 +10902,13 @@ static void snprintf_output_types(char *buf, size_t len,
>  static const char * const output_format_str[] = {
>  	[INTEL_OUTPUT_FORMAT_INVALID] = "Invalid",
>  	[INTEL_OUTPUT_FORMAT_RGB] = "RGB",
> +	[INTEL_OUTPUT_FORMAT_YCBCR420] = "YCBCR4:2:0",
>  };
>  
>  static const char *output_formats(enum intel_output_format format)
>  {
> -	if (format != INTEL_OUTPUT_FORMAT_RGB)
> +	if (format < INTEL_OUTPUT_FORMAT_RGB ||

I think the enum ends up unsigned so this < check is pointless.

> +	    format > ARRAY_SIZE(output_format_str))

This should be >=

With this fixed
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

>  		format = INTEL_OUTPUT_FORMAT_INVALID;
>  	return output_format_str[format];
>  }
> @@ -10926,9 +10944,6 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
>  				      pipe_config->fdi_lanes,
>  				      &pipe_config->fdi_m_n);
>  
> -	if (pipe_config->ycbcr420)
> -		DRM_DEBUG_KMS("YCbCr 4:2:0 output enabled\n");
> -
>  	if (intel_crtc_has_dp_encoder(pipe_config)) {
>  		intel_dump_m_n_config(pipe_config, "dp m_n",
>  				pipe_config->lane_count, &pipe_config->dp_m_n);
> @@ -11515,7 +11530,6 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
>  	PIPE_CONF_CHECK_BOOL(hdmi_scrambling);
>  	PIPE_CONF_CHECK_BOOL(hdmi_high_tmds_clock_ratio);
>  	PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_infoframe);
> -	PIPE_CONF_CHECK_BOOL(ycbcr420);
>  
>  	PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_audio);
>  
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index f704720..cc7a46e 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -711,6 +711,7 @@ struct intel_crtc_wm_state {
>  enum intel_output_format {
>  	INTEL_OUTPUT_FORMAT_INVALID,
>  	INTEL_OUTPUT_FORMAT_RGB,
> +	INTEL_OUTPUT_FORMAT_YCBCR420,
>  };
>  
>  struct intel_crtc_state {
> @@ -900,9 +901,6 @@ struct intel_crtc_state {
>  	/* HDMI High TMDS char rate ratio */
>  	bool hdmi_high_tmds_clock_ratio;
>  
> -	/* output format is YCBCR 4:2:0 */
> -	bool ycbcr420;
> -
>  	/* Output format RGB/YCBCR etc */
>  	enum intel_output_format output_format;
>  };
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 8993e66..f1259a9 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -486,7 +486,7 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
>  		return;
>  	}
>  
> -	if (crtc_state->ycbcr420)
> +	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
>  		frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
>  	else
>  		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
> @@ -1620,7 +1620,7 @@ static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
>  		if (connector_state->crtc != crtc_state->base.crtc)
>  			continue;
>  
> -		if (crtc_state->ycbcr420) {
> +		if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
>  			const struct drm_hdmi_info *hdmi = &info->hdmi;
>  
>  			if (bpc == 12 && !(hdmi->y420_dc_modes &
> @@ -1665,7 +1665,7 @@ intel_hdmi_ycbcr420_config(struct drm_connector *connector,
>  	*clock_12bpc /= 2;
>  	*clock_10bpc /= 2;
>  	*clock_8bpc /= 2;
> -	config->ycbcr420 = true;
> +	config->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
>  
>  	/* YCBCR 420 output conversion needs a scaler */
>  	if (skl_update_scaler_crtc(config)) {
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index 4a9f139..5cca04a 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -111,7 +111,7 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
>  	/* Native modes don't need fitting */
>  	if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w &&
>  	    adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h &&
> -	    !pipe_config->ycbcr420)
> +	    pipe_config->output_format != INTEL_OUTPUT_FORMAT_YCBCR420)
>  		goto done;
>  
>  	switch (fitting_mode) {
> -- 
> 2.7.4

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v10 3/8] drm/i915: Add CRTC output format YCBCR 4:4:4

[Shashank Sharma]

This patch adds support for YCBCR 4:4:4 CRTC output format.
To do this, this patch extends the existing YCBCR 4:2:0
framework by:
- Adding new parameter in for YCBCR 4:4:4 enum crtc_iutput_format.
- Adding case for YCBCR 4:4:4 in while setting AVI infoframes.
- Adding necessary checks in modeset sequence.

V3: Added this patch in the series
V4: Added r-b from Maarten (for v3)
    Addressed review comment from Ville:
    Do not use (config->output_format > CRTC_OUTPUT_RGB)
V5: Rebase
V6: Rebase and small change, to accommodate changes in patch 2
V7: Fixed checkpatch alignment warnings
V8: Rebase
V9: Rebase
V10: Rebase

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/intel_color.c   |  3 ++-
 drivers/gpu/drm/i915/intel_display.c | 13 +++++++++----
 drivers/gpu/drm/i915/intel_drv.h     |  1 +
 drivers/gpu/drm/i915/intel_hdmi.c    |  2 ++
 4 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
index bf9d8f6..5127da2 100644
--- a/drivers/gpu/drm/i915/intel_color.c
+++ b/drivers/gpu/drm/i915/intel_color.c
@@ -149,7 +149,8 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)
 	if (INTEL_GEN(dev_priv) >= 8 || IS_HASWELL(dev_priv))
 		limited_color_range = intel_crtc_state->limited_color_range;
 
-	if (intel_crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
+	if (intel_crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
+	    intel_crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) {
 		ilk_load_ycbcr_conversion_matrix(intel_crtc);
 		return;
 	} else if (crtc_state->ctm) {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e2a1e4f..3384129 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -6621,8 +6621,9 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
 		return -EINVAL;
 	}
 
-	if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
-	    pipe_config->base.ctm) {
+	if ((pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
+	     pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) &&
+	     pipe_config->base.ctm) {
 		/*
 		 * There is only one pipe CSC unit per pipe, and we need that
 		 * for output conversion from RGB->YCBCR. So if CTM is already
@@ -7842,6 +7843,8 @@ static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,
 					output = INTEL_OUTPUT_FORMAT_INVALID;
 				else
 					output = INTEL_OUTPUT_FORMAT_YCBCR420;
+			} else {
+				output = INTEL_OUTPUT_FORMAT_YCBCR444;
 			}
 		}
 	}
@@ -8484,11 +8487,13 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
 		if (intel_crtc->config->dither)
 			val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
 
-		if (config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
+		if (config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
+		    config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
 			val |= PIPEMISC_OUTPUT_COLORSPACE_YUV;
+
+		if (config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
 			val |= PIPEMISC_YUV420_ENABLE |
 			       PIPEMISC_YUV420_MODE_FULL_BLEND;
-		}
 
 		I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
 	}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cc7a46e..74ea4ac 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -712,6 +712,7 @@ enum intel_output_format {
 	INTEL_OUTPUT_FORMAT_INVALID,
 	INTEL_OUTPUT_FORMAT_RGB,
 	INTEL_OUTPUT_FORMAT_YCBCR420,
+	INTEL_OUTPUT_FORMAT_YCBCR444,
 };
 
 struct intel_crtc_state {
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index f1259a9..893d53d 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -488,6 +488,8 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
 
 	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
 		frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
+	else if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
+		frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
 	else
 		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
 
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v10 3/8] drm/i915: Add CRTC output format YCBCR 4:4:4

[Ville Syrjälä]

On Tue, Aug 14, 2018 at 03:23:21PM +0530, Shashank Sharma wrote:
> This patch adds support for YCBCR 4:4:4 CRTC output format.
> To do this, this patch extends the existing YCBCR 4:2:0
> framework by:
> - Adding new parameter in for YCBCR 4:4:4 enum crtc_iutput_format.
> - Adding case for YCBCR 4:4:4 in while setting AVI infoframes.
> - Adding necessary checks in modeset sequence.
> 
> V3: Added this patch in the series
> V4: Added r-b from Maarten (for v3)
>     Addressed review comment from Ville:
>     Do not use (config->output_format > CRTC_OUTPUT_RGB)
> V5: Rebase
> V6: Rebase and small change, to accommodate changes in patch 2
> V7: Fixed checkpatch alignment warnings
> V8: Rebase
> V9: Rebase
> V10: Rebase
> 
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_color.c   |  3 ++-
>  drivers/gpu/drm/i915/intel_display.c | 13 +++++++++----
>  drivers/gpu/drm/i915/intel_drv.h     |  1 +
>  drivers/gpu/drm/i915/intel_hdmi.c    |  2 ++
>  4 files changed, 14 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
> index bf9d8f6..5127da2 100644
> --- a/drivers/gpu/drm/i915/intel_color.c
> +++ b/drivers/gpu/drm/i915/intel_color.c
> @@ -149,7 +149,8 @@ static void ilk_load_csc_matrix(struct drm_crtc_state *crtc_state)
>  	if (INTEL_GEN(dev_priv) >= 8 || IS_HASWELL(dev_priv))
>  		limited_color_range = intel_crtc_state->limited_color_range;
>  
> -	if (intel_crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
> +	if (intel_crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
> +	    intel_crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) {
>  		ilk_load_ycbcr_conversion_matrix(intel_crtc);
>  		return;
>  	} else if (crtc_state->ctm) {
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index e2a1e4f..3384129 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -6621,8 +6621,9 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
>  		return -EINVAL;
>  	}
>  
> -	if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
> -	    pipe_config->base.ctm) {
> +	if ((pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
> +	     pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) &&
> +	     pipe_config->base.ctm) {
>  		/*
>  		 * There is only one pipe CSC unit per pipe, and we need that
>  		 * for output conversion from RGB->YCBCR. So if CTM is already
> @@ -7842,6 +7843,8 @@ static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,
>  					output = INTEL_OUTPUT_FORMAT_INVALID;
>  				else
>  					output = INTEL_OUTPUT_FORMAT_YCBCR420;
> +			} else {
> +				output = INTEL_OUTPUT_FORMAT_YCBCR444;
>  			}
>  		}
>  	}
> @@ -8484,11 +8487,13 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
>  		if (intel_crtc->config->dither)
>  			val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
>  
> -		if (config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
> +		if (config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
> +		    config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
>  			val |= PIPEMISC_OUTPUT_COLORSPACE_YUV;
> +
> +		if (config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
>  			val |= PIPEMISC_YUV420_ENABLE |
>  			       PIPEMISC_YUV420_MODE_FULL_BLEND;
> -		}
>  
>  		I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
>  	}
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index cc7a46e..74ea4ac 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -712,6 +712,7 @@ enum intel_output_format {
>  	INTEL_OUTPUT_FORMAT_INVALID,
>  	INTEL_OUTPUT_FORMAT_RGB,
>  	INTEL_OUTPUT_FORMAT_YCBCR420,
> +	INTEL_OUTPUT_FORMAT_YCBCR444,
>  };

Missing output_format_str[INTEL_OUTPUT_FORMAT_YCBCR444].

With that fixed
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

>  
>  struct intel_crtc_state {
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index f1259a9..893d53d 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -488,6 +488,8 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
>  
>  	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
>  		frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
> +	else if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
> +		frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
>  	else
>  		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
>  
> -- 
> 2.7.4

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v10 4/8] drm/i915: Check LSPCON vendor OUI

[Shashank Sharma]

From: "Sharma, Shashank" <shashank.sharma@intel.com>

Intel LSPCON chip is provided by 2 vendors:
- Megachips America (MCA)
- Parade technologies (Parade tech)

Its important to know the vendor of this chip, as the address to
write AVI infoframes is different for those two.

This patch reads the vendor OUI signature, and marks into LSPCON
encoder structure for future usages.

This patch also does a small re-arrangement of the code, by moving
lspcon mode change into probe function.

V2: Use dp->desc for OUI detection, dont add a helper for this
    (Ville)
V3: Rebase, Added r-b from Maarten
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/intel_drv.h    |  6 ++++
 drivers/gpu/drm/i915/intel_lspcon.c | 69 +++++++++++++++++++++++++++++--------
 2 files changed, 61 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 74ea4ac..67f7bd3 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1158,9 +1158,15 @@ struct intel_dp {
 	struct intel_dp_compliance compliance;
 };
 
+enum lspcon_vendor {
+	LSPCON_VENDOR_MCA,
+	LSPCON_VENDOR_PARADE
+};
+
 struct intel_lspcon {
 	bool active;
 	enum drm_lspcon_mode mode;
+	enum lspcon_vendor vendor;
 };
 
 struct intel_digital_port {
diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index 5dae16c..85b35ce 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -27,6 +27,10 @@
 #include <drm/drm_dp_dual_mode_helper.h>
 #include "intel_drv.h"
 
+/* LSPCON OUI Vendor ID(signatures) */
+#define LSPCON_VENDOR_PARADE_OUI 0x001CF8
+#define LSPCON_VENDOR_MCA_OUI 0x0060AD
+
 static struct intel_dp *lspcon_to_intel_dp(struct intel_lspcon *lspcon)
 {
 	struct intel_digital_port *dig_port =
@@ -50,6 +54,40 @@ static const char *lspcon_mode_name(enum drm_lspcon_mode mode)
 	}
 }
 
+static bool lspcon_detect_vendor(struct intel_lspcon *lspcon)
+{
+	struct intel_dp *dp = lspcon_to_intel_dp(lspcon);
+	struct drm_dp_dpcd_ident *ident;
+	u32 vendor_oui;
+
+	if (drm_dp_read_desc(&dp->aux, &dp->desc, drm_dp_is_branch(dp->dpcd))) {
+		DRM_ERROR("Can't read description\n");
+		return false;
+	}
+
+	ident = &dp->desc.ident;
+	vendor_oui = (ident->oui[0] << 16) | (ident->oui[1] << 8) |
+		      ident->oui[2];
+
+	switch (vendor_oui) {
+	case LSPCON_VENDOR_MCA_OUI:
+		lspcon->vendor = LSPCON_VENDOR_MCA;
+		DRM_DEBUG_KMS("Vendor: Mega Chips\n");
+		break;
+
+	case LSPCON_VENDOR_PARADE_OUI:
+		lspcon->vendor = LSPCON_VENDOR_PARADE;
+		DRM_DEBUG_KMS("Vendor: Parade Tech\n");
+		break;
+
+	default:
+		DRM_ERROR("Invalid/Unknown vendor OUI\n");
+		return false;
+	}
+
+	return true;
+}
+
 static enum drm_lspcon_mode lspcon_get_current_mode(struct intel_lspcon *lspcon)
 {
 	enum drm_lspcon_mode current_mode;
@@ -159,7 +197,18 @@ static bool lspcon_probe(struct intel_lspcon *lspcon)
 	/* Yay ... got a LSPCON device */
 	DRM_DEBUG_KMS("LSPCON detected\n");
 	lspcon->mode = lspcon_wait_mode(lspcon, expected_mode);
-	lspcon->active = true;
+
+	/*
+	 * In the SW state machine, lets Put LSPCON in PCON mode only.
+	 * In this way, it will work with both HDMI 1.4 sinks as well as HDMI
+	 * 2.0 sinks.
+	 */
+	if (lspcon->active && lspcon->mode != DRM_LSPCON_MODE_PCON) {
+		if (lspcon_change_mode(lspcon, DRM_LSPCON_MODE_PCON) < 0) {
+			DRM_ERROR("LSPCON mode change to PCON failed\n");
+			return false;
+		}
+	}
 	return true;
 }
 
@@ -230,25 +279,17 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)
 		return false;
 	}
 
-	/*
-	* In the SW state machine, lets Put LSPCON in PCON mode only.
-	* In this way, it will work with both HDMI 1.4 sinks as well as HDMI
-	* 2.0 sinks.
-	*/
-	if (lspcon->active && lspcon->mode != DRM_LSPCON_MODE_PCON) {
-		if (lspcon_change_mode(lspcon, DRM_LSPCON_MODE_PCON) < 0) {
-			DRM_ERROR("LSPCON mode change to PCON failed\n");
-			return false;
-		}
-	}
-
 	if (!intel_dp_read_dpcd(dp)) {
 		DRM_ERROR("LSPCON DPCD read failed\n");
 		return false;
 	}
 
-	drm_dp_read_desc(&dp->aux, &dp->desc, drm_dp_is_branch(dp->dpcd));
+	if (!lspcon_detect_vendor(lspcon)) {
+		DRM_ERROR("LSPCON vendor detection failed\n");
+		return false;
+	}
 
+	lspcon->active = true;
 	DRM_DEBUG_KMS("Success: LSPCON init\n");
 	return true;
 }
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v10 5/8] drm/i915: Add AVI infoframe support for LSPCON

[Shashank Sharma]

In order to pass AVI infoframes to LSPCON devices, a source has to
write them in a vendor recommended method and location.

This patch series:
- adds generic LSPCON infoframe setup functions.
- registers these functions into existing AVI infoframe framework.
- triggers these functions from modeset sequence.

Next patches in the series will add vendor specific code.

V2: Added new parameter to align with new definition of
    drm_hdmi_avi_infoframe_quant_range
V3: Added r-b from Maarten (for V2)
    Added new parameter output_format in struct lspcon to accommodate
    Ville's review comments on last patch of the series
V4: Addressed Ville's review comment
    - Do not add output_format in LSPCON state, as its non-atomic. Add
      this into CRTC state (added in a later patch).
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/intel_ddi.c    | 19 +++++++++++---
 drivers/gpu/drm/i915/intel_drv.h    | 13 +++++++++-
 drivers/gpu/drm/i915/intel_hdmi.c   | 13 +++++++---
 drivers/gpu/drm/i915/intel_lspcon.c | 49 +++++++++++++++++++++++++++++++++++++
 4 files changed, 86 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index a036fe6..148bfaa 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2895,10 +2895,22 @@ static void intel_ddi_pre_enable(struct intel_encoder *encoder,
 
 	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
 
-	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
 		intel_ddi_pre_enable_hdmi(encoder, crtc_state, conn_state);
-	else
+	} else {
+		struct intel_lspcon *lspcon =
+				enc_to_intel_lspcon(&encoder->base);
+
 		intel_ddi_pre_enable_dp(encoder, crtc_state, conn_state);
+		if (lspcon->active) {
+			struct intel_digital_port *dig_port =
+					enc_to_dig_port(&encoder->base);
+
+			dig_port->set_infoframes(&encoder->base,
+						 crtc_state->has_infoframe,
+						 crtc_state, conn_state);
+		}
+	}
 }
 
 static void intel_disable_ddi_buf(struct intel_encoder *encoder)
@@ -3760,8 +3772,6 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 		MISSING_CASE(port);
 	}
 
-	intel_infoframe_init(intel_dig_port);
-
 	if (init_dp) {
 		if (!intel_ddi_init_dp_connector(intel_dig_port))
 			goto err;
@@ -3790,6 +3800,7 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
 				port_name(port));
 	}
 
+	intel_infoframe_init(intel_dig_port);
 	return;
 
 err:
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 67f7bd3..509c659 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1314,6 +1314,12 @@ static inline bool intel_encoder_is_dp(struct intel_encoder *encoder)
 	}
 }
 
+static inline struct intel_lspcon *
+enc_to_intel_lspcon(struct drm_encoder *encoder)
+{
+	return &enc_to_dig_port(encoder)->lspcon;
+}
+
 static inline struct intel_digital_port *
 dp_to_dig_port(struct intel_dp *intel_dp)
 {
@@ -1859,7 +1865,6 @@ bool intel_hdmi_handle_sink_scrambling(struct intel_encoder *encoder,
 void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable);
 void intel_infoframe_init(struct intel_digital_port *intel_dig_port);
 
-
 /* intel_lvds.c */
 bool intel_lvds_port_enabled(struct drm_i915_private *dev_priv,
 			     i915_reg_t lvds_reg, enum pipe *pipe);
@@ -2188,6 +2193,12 @@ void intel_color_load_luts(struct drm_crtc_state *crtc_state);
 bool lspcon_init(struct intel_digital_port *intel_dig_port);
 void lspcon_resume(struct intel_lspcon *lspcon);
 void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon);
+void lspcon_set_infoframes(struct drm_encoder *encoder,
+			   bool enable,
+			   const struct intel_crtc_state *crtc_state,
+			   const struct drm_connector_state *conn_state);
+bool lspcon_infoframe_enabled(struct drm_encoder *encoder,
+			      const struct intel_crtc_state *pipe_config);
 
 /* intel_pipe_crc.c */
 #ifdef CONFIG_DEBUG_FS
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 893d53d..9f2fac8 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -2311,9 +2311,16 @@ void intel_infoframe_init(struct intel_digital_port *intel_dig_port)
 		intel_dig_port->set_infoframes = g4x_set_infoframes;
 		intel_dig_port->infoframe_enabled = g4x_infoframe_enabled;
 	} else if (HAS_DDI(dev_priv)) {
-		intel_dig_port->write_infoframe = hsw_write_infoframe;
-		intel_dig_port->set_infoframes = hsw_set_infoframes;
-		intel_dig_port->infoframe_enabled = hsw_infoframe_enabled;
+		if (intel_dig_port->lspcon.active) {
+			intel_dig_port->set_infoframes = lspcon_set_infoframes;
+			intel_dig_port->infoframe_enabled =
+						lspcon_infoframe_enabled;
+		} else {
+			intel_dig_port->set_infoframes = hsw_set_infoframes;
+			intel_dig_port->infoframe_enabled =
+						hsw_infoframe_enabled;
+			intel_dig_port->write_infoframe = hsw_write_infoframe;
+		}
 	} else if (HAS_PCH_IBX(dev_priv)) {
 		intel_dig_port->write_infoframe = ibx_write_infoframe;
 		intel_dig_port->set_infoframes = ibx_set_infoframes;
diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index 85b35ce..1edca590 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -234,6 +234,55 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)
 	DRM_DEBUG_KMS("LSPCON DP descriptor mismatch after resume\n");
 }
 
+void lspcon_set_infoframes(struct drm_encoder *encoder,
+			   bool enable,
+			   const struct intel_crtc_state *crtc_state,
+			   const struct drm_connector_state *conn_state)
+{
+	ssize_t ret;
+	union hdmi_infoframe frame;
+	uint8_t buf[VIDEO_DIP_DATA_SIZE];
+	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+	struct intel_lspcon *lspcon = &dig_port->lspcon;
+	struct intel_dp *intel_dp = &dig_port->dp;
+	struct drm_connector *connector = &intel_dp->attached_connector->base;
+	const struct drm_display_mode *mode = &crtc_state->base.adjusted_mode;
+	bool is_hdmi2_sink = connector->display_info.hdmi.scdc.supported;
+
+	if (!lspcon->active) {
+		DRM_ERROR("Writing infoframes while LSPCON disabled ?\n");
+		return;
+	}
+
+	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
+						       mode, is_hdmi2_sink);
+	if (ret < 0) {
+		DRM_ERROR("couldn't fill AVI infoframe\n");
+		return;
+	}
+
+	drm_hdmi_avi_infoframe_quant_range(&frame.avi, mode,
+					   crtc_state->limited_color_range ?
+					   HDMI_QUANTIZATION_RANGE_LIMITED :
+					   HDMI_QUANTIZATION_RANGE_FULL,
+					   false, is_hdmi2_sink);
+
+	ret = hdmi_infoframe_pack(&frame, buf, sizeof(buf));
+	if (ret < 0) {
+		DRM_ERROR("Failed to pack AVI IF\n");
+		return;
+	}
+
+	dig_port->write_infoframe(encoder, crtc_state, HDMI_INFOFRAME_TYPE_AVI,
+				  buf, ret);
+}
+
+bool lspcon_infoframe_enabled(struct drm_encoder *encoder,
+			      const struct intel_crtc_state *pipe_config)
+{
+	return enc_to_intel_lspcon(encoder)->active;
+}
+
 void lspcon_resume(struct intel_lspcon *lspcon)
 {
 	enum drm_lspcon_mode expected_mode;
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v10 6/8] drm/i915: Write AVI infoframes for MCA LSPCON

[Shashank Sharma]

From: "Sharma, Shashank" <shashank.sharma@intel.com>

As LSPCON is a DP branch device, LSPCON vendors define
specific methods to pass AVI infoframes to the the chip.
This patch adds:
- a generic wrapper function for writing AVI infoframes for
  all LSPCON devices.
- a vendor specific function to wrire AVI infoframes into
  MCA LSPCON devices.

V2: Rebase
V3: Added r-b from Maarten
V4: Rebase
V5: Rebase
V6: Rebase
V7: Fixed checkpatch warnings for alignment
V8: Rebase
V9: Added the retry logic, with 50ms incremental delays while
    writing AVI IF
V10: Changed the return value check

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/intel_drv.h    |  4 ++
 drivers/gpu/drm/i915/intel_hdmi.c   |  2 +
 drivers/gpu/drm/i915/intel_lspcon.c | 89 +++++++++++++++++++++++++++++++++++++
 3 files changed, 95 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 509c659..2cc0775 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -2193,6 +2193,10 @@ void intel_color_load_luts(struct drm_crtc_state *crtc_state);
 bool lspcon_init(struct intel_digital_port *intel_dig_port);
 void lspcon_resume(struct intel_lspcon *lspcon);
 void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon);
+void lspcon_write_infoframe(struct drm_encoder *encoder,
+			    const struct intel_crtc_state *crtc_state,
+			    unsigned int type,
+			    const void *buf, ssize_t len);
 void lspcon_set_infoframes(struct drm_encoder *encoder,
 			   bool enable,
 			   const struct intel_crtc_state *crtc_state,
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 9f2fac8..2e1b6e8 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -2312,6 +2312,8 @@ void intel_infoframe_init(struct intel_digital_port *intel_dig_port)
 		intel_dig_port->infoframe_enabled = g4x_infoframe_enabled;
 	} else if (HAS_DDI(dev_priv)) {
 		if (intel_dig_port->lspcon.active) {
+			intel_dig_port->write_infoframe =
+					lspcon_write_infoframe;
 			intel_dig_port->set_infoframes = lspcon_set_infoframes;
 			intel_dig_port->infoframe_enabled =
 						lspcon_infoframe_enabled;
diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index 1edca590..80b9afa 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -31,6 +31,12 @@
 #define LSPCON_VENDOR_PARADE_OUI 0x001CF8
 #define LSPCON_VENDOR_MCA_OUI 0x0060AD
 
+/* AUX addresses to write MCA AVI IF */
+#define LSPCON_MCA_AVI_IF_WRITE_OFFSET 0x5C0
+#define LSPCON_MCA_AVI_IF_CTRL 0x5DF
+#define  LSPCON_MCA_AVI_IF_KICKOFF (1 << 0)
+#define  LSPCON_MCA_AVI_IF_HANDLED (1 << 1)
+
 static struct intel_dp *lspcon_to_intel_dp(struct intel_lspcon *lspcon)
 {
 	struct intel_digital_port *dig_port =
@@ -234,6 +240,89 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)
 	DRM_DEBUG_KMS("LSPCON DP descriptor mismatch after resume\n");
 }
 
+static bool _lspcon_write_avi_infoframe_mca(struct drm_dp_aux *aux,
+					    const uint8_t *buffer, ssize_t len)
+{
+	int ret;
+	uint32_t val = 0;
+	uint32_t retry;
+	uint16_t reg;
+	const uint8_t *data = buffer;
+
+	reg = LSPCON_MCA_AVI_IF_WRITE_OFFSET;
+	while (val < len) {
+
+		/* DPCD write for AVI IF can fail on a slow FW day, so retry */
+		for (retry = 0; retry < 5; retry++) {
+			ret = drm_dp_dpcd_write(aux, reg, (void *)data, 1);
+			if (ret == 1)
+				break;
+			else if (retry < 4) {
+				mdelay(50);
+				continue;
+			} else {
+				DRM_ERROR("DPCD write failed, add:0x%x\n", reg);
+				return false;
+			}
+		}
+		val++; reg++; data++;
+	}
+
+	val = 0;
+	reg = LSPCON_MCA_AVI_IF_CTRL;
+	ret = drm_dp_dpcd_read(aux, reg, &val, 1);
+	if (ret < 0) {
+		DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
+		return false;
+	}
+
+	/* Indicate LSPCON chip about infoframe, clear bit 1 and set bit 0 */
+	val &= ~LSPCON_MCA_AVI_IF_HANDLED;
+	val |= LSPCON_MCA_AVI_IF_KICKOFF;
+
+	ret = drm_dp_dpcd_write(aux, reg, &val, 1);
+	if (ret < 0) {
+		DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
+		return false;
+	}
+
+	val = 0;
+	ret = drm_dp_dpcd_read(aux, reg, &val, 1);
+	if (ret < 0) {
+		DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
+		return false;
+	}
+
+	if (val == LSPCON_MCA_AVI_IF_HANDLED)
+		DRM_DEBUG_KMS("AVI IF handled by FW\n");
+
+	return true;
+}
+
+void lspcon_write_infoframe(struct drm_encoder *encoder,
+			    const struct intel_crtc_state *crtc_state,
+			    unsigned int type,
+			    const void *frame, ssize_t len)
+{
+	bool ret = true;
+	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
+
+	/* LSPCON only needs AVI IF */
+	if (type != HDMI_INFOFRAME_TYPE_AVI)
+		return;
+
+	if (lspcon->vendor == LSPCON_VENDOR_MCA)
+		ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux,
+						      frame, len);
+	if (!ret) {
+		DRM_ERROR("Failed to write AVI infoframes\n");
+		return;
+	}
+
+	DRM_DEBUG_DRIVER("AVI infoframes updated successfully\n");
+}
+
 void lspcon_set_infoframes(struct drm_encoder *encoder,
 			   bool enable,
 			   const struct intel_crtc_state *crtc_state,
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v11 6/8] drm/i915: Write AVI infoframes for MCA LSPCON

[Shashank Sharma]

From: "Sharma, Shashank" <shashank.sharma@intel.com>

As LSPCON is a DP branch device, LSPCON vendors define
specific methods to pass AVI infoframes to the the chip.
This patch adds:
- a generic wrapper function for writing AVI infoframes for
  all LSPCON devices.
- a vendor specific function to wrire AVI infoframes into
  MCA LSPCON devices.

V2: Rebase
V3: Added r-b from Maarten
V4: Rebase
V5: Rebase
V6: Rebase
V7: Fixed checkpatch warnings for alignment
V8: Rebase
V9: Added the retry logic, with 50ms incremental delays while
    writing AVI IF
V10: Changed the return value check
V11: Fixed checkpatch warning

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/intel_drv.h    |  4 ++
 drivers/gpu/drm/i915/intel_hdmi.c   |  2 +
 drivers/gpu/drm/i915/intel_lspcon.c | 88 +++++++++++++++++++++++++++++++++++++
 3 files changed, 94 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 509c659..2cc0775 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -2193,6 +2193,10 @@ void intel_color_load_luts(struct drm_crtc_state *crtc_state);
 bool lspcon_init(struct intel_digital_port *intel_dig_port);
 void lspcon_resume(struct intel_lspcon *lspcon);
 void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon);
+void lspcon_write_infoframe(struct drm_encoder *encoder,
+			    const struct intel_crtc_state *crtc_state,
+			    unsigned int type,
+			    const void *buf, ssize_t len);
 void lspcon_set_infoframes(struct drm_encoder *encoder,
 			   bool enable,
 			   const struct intel_crtc_state *crtc_state,
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 9f2fac8..2e1b6e8 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -2312,6 +2312,8 @@ void intel_infoframe_init(struct intel_digital_port *intel_dig_port)
 		intel_dig_port->infoframe_enabled = g4x_infoframe_enabled;
 	} else if (HAS_DDI(dev_priv)) {
 		if (intel_dig_port->lspcon.active) {
+			intel_dig_port->write_infoframe =
+					lspcon_write_infoframe;
 			intel_dig_port->set_infoframes = lspcon_set_infoframes;
 			intel_dig_port->infoframe_enabled =
 						lspcon_infoframe_enabled;
diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index 1edca590..3ee10ab 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -31,6 +31,12 @@
 #define LSPCON_VENDOR_PARADE_OUI 0x001CF8
 #define LSPCON_VENDOR_MCA_OUI 0x0060AD
 
+/* AUX addresses to write MCA AVI IF */
+#define LSPCON_MCA_AVI_IF_WRITE_OFFSET 0x5C0
+#define LSPCON_MCA_AVI_IF_CTRL 0x5DF
+#define  LSPCON_MCA_AVI_IF_KICKOFF (1 << 0)
+#define  LSPCON_MCA_AVI_IF_HANDLED (1 << 1)
+
 static struct intel_dp *lspcon_to_intel_dp(struct intel_lspcon *lspcon)
 {
 	struct intel_digital_port *dig_port =
@@ -234,6 +240,88 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)
 	DRM_DEBUG_KMS("LSPCON DP descriptor mismatch after resume\n");
 }
 
+static bool _lspcon_write_avi_infoframe_mca(struct drm_dp_aux *aux,
+					    const uint8_t *buffer, ssize_t len)
+{
+	int ret;
+	uint32_t val = 0;
+	uint32_t retry;
+	uint16_t reg;
+	const uint8_t *data = buffer;
+
+	reg = LSPCON_MCA_AVI_IF_WRITE_OFFSET;
+	while (val < len) {
+		/* DPCD write for AVI IF can fail on a slow FW day, so retry */
+		for (retry = 0; retry < 5; retry++) {
+			ret = drm_dp_dpcd_write(aux, reg, (void *)data, 1);
+			if (ret == 1) {
+				break;
+			} else if (retry < 4) {
+				mdelay(50);
+				continue;
+			} else {
+				DRM_ERROR("DPCD write failed, add:0x%x\n", reg);
+				return false;
+			}
+		}
+		val++; reg++; data++;
+	}
+
+	val = 0;
+	reg = LSPCON_MCA_AVI_IF_CTRL;
+	ret = drm_dp_dpcd_read(aux, reg, &val, 1);
+	if (ret < 0) {
+		DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
+		return false;
+	}
+
+	/* Indicate LSPCON chip about infoframe, clear bit 1 and set bit 0 */
+	val &= ~LSPCON_MCA_AVI_IF_HANDLED;
+	val |= LSPCON_MCA_AVI_IF_KICKOFF;
+
+	ret = drm_dp_dpcd_write(aux, reg, &val, 1);
+	if (ret < 0) {
+		DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
+		return false;
+	}
+
+	val = 0;
+	ret = drm_dp_dpcd_read(aux, reg, &val, 1);
+	if (ret < 0) {
+		DRM_ERROR("DPCD read failed, address 0x%x\n", reg);
+		return false;
+	}
+
+	if (val == LSPCON_MCA_AVI_IF_HANDLED)
+		DRM_DEBUG_KMS("AVI IF handled by FW\n");
+
+	return true;
+}
+
+void lspcon_write_infoframe(struct drm_encoder *encoder,
+			    const struct intel_crtc_state *crtc_state,
+			    unsigned int type,
+			    const void *frame, ssize_t len)
+{
+	bool ret = true;
+	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+	struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
+
+	/* LSPCON only needs AVI IF */
+	if (type != HDMI_INFOFRAME_TYPE_AVI)
+		return;
+
+	if (lspcon->vendor == LSPCON_VENDOR_MCA)
+		ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux,
+						      frame, len);
+	if (!ret) {
+		DRM_ERROR("Failed to write AVI infoframes\n");
+		return;
+	}
+
+	DRM_DEBUG_DRIVER("AVI infoframes updated successfully\n");
+}
+
 void lspcon_set_infoframes(struct drm_encoder *encoder,
 			   bool enable,
 			   const struct intel_crtc_state *crtc_state,
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v10 7/8] drm/i915: Write AVI infoframes for Parade LSPCON

[Shashank Sharma]

Different LSPCON vendors specify their custom methods to pass
AVI infoframes to the LSPCON chip, so does Parade tech.

This patch adds functions to arrange and write AVI infoframes
into Parade LSPCON chips.

V2: rebase
V3: Added r-b from Maarten
V4: rebase
V5: rebase
V6: rebase
V7: Fixed checkpatch warnings for alignment
V8: Rebase
V9: Rebase
V10: Rebase

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/intel_lspcon.c | 117 +++++++++++++++++++++++++++++++++++-
 1 file changed, 116 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index 80b9afa..8e0477e 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -37,6 +37,12 @@
 #define  LSPCON_MCA_AVI_IF_KICKOFF (1 << 0)
 #define  LSPCON_MCA_AVI_IF_HANDLED (1 << 1)
 
+/* AUX addresses to write Parade AVI IF */
+#define LSPCON_PARADE_AVI_IF_WRITE_OFFSET 0x516
+#define LSPCON_PARADE_AVI_IF_CTRL 0x51E
+#define  LSPCON_PARADE_AVI_IF_KICKOFF (1 << 7)
+#define LSPCON_PARADE_AVI_IF_DATA_SIZE 32
+
 static struct intel_dp *lspcon_to_intel_dp(struct intel_lspcon *lspcon)
 {
 	struct intel_digital_port *dig_port =
@@ -240,6 +246,111 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)
 	DRM_DEBUG_KMS("LSPCON DP descriptor mismatch after resume\n");
 }
 
+static bool lspcon_parade_fw_ready(struct drm_dp_aux *aux)
+{
+	u8 avi_if_ctrl;
+	u8 retry;
+	ssize_t ret;
+
+	/* Check if LSPCON FW is ready for data */
+	for (retry = 0; retry < 5; retry++) {
+		if (retry)
+			usleep_range(200, 300);
+
+		ret = drm_dp_dpcd_read(aux, LSPCON_PARADE_AVI_IF_CTRL,
+				       &avi_if_ctrl, 1);
+		if (ret < 0) {
+			DRM_ERROR("Failed to read AVI IF control\n");
+			return false;
+		}
+
+		if ((avi_if_ctrl & LSPCON_PARADE_AVI_IF_KICKOFF) == 0)
+			return true;
+	}
+
+	DRM_ERROR("Parade FW not ready to accept AVI IF\n");
+	return false;
+}
+
+static bool _lspcon_parade_write_infoframe_blocks(struct drm_dp_aux *aux,
+						  uint8_t *avi_buf)
+{
+	u8 avi_if_ctrl;
+	u8 block_count = 0;
+	u8 *data;
+	uint16_t reg;
+	ssize_t ret;
+
+	while (block_count < 4) {
+		if (!lspcon_parade_fw_ready(aux)) {
+			DRM_DEBUG_KMS("LSPCON FW not ready, block %d\n",
+				      block_count);
+			return false;
+		}
+
+		reg = LSPCON_PARADE_AVI_IF_WRITE_OFFSET;
+		data = avi_buf + block_count * 8;
+		ret = drm_dp_dpcd_write(aux, reg, data, 8);
+		if (ret < 0) {
+			DRM_ERROR("Failed to write AVI IF block %d\n",
+				  block_count);
+			return false;
+		}
+
+		/*
+		 * Once a block of data is written, we have to inform the FW
+		 * about this by writing into avi infoframe control register:
+		 * - set the kickoff bit[7] to 1
+		 * - write the block no. to bits[1:0]
+		 */
+		reg = LSPCON_PARADE_AVI_IF_CTRL;
+		avi_if_ctrl = LSPCON_PARADE_AVI_IF_KICKOFF | block_count;
+		ret = drm_dp_dpcd_write(aux, reg, &avi_if_ctrl, 1);
+		if (ret < 0) {
+			DRM_ERROR("Failed to update (0x%x), block %d\n",
+				  reg, block_count);
+			return false;
+		}
+
+		block_count++;
+	}
+
+	DRM_DEBUG_KMS("Wrote AVI IF blocks successfully\n");
+	return true;
+}
+
+static bool _lspcon_write_avi_infoframe_parade(struct drm_dp_aux *aux,
+					       const uint8_t *frame,
+					       ssize_t len)
+{
+	uint8_t avi_if[LSPCON_PARADE_AVI_IF_DATA_SIZE] = {1, };
+
+	/*
+	 * Parade's frames contains 32 bytes of data, divided
+	 * into 4 frames:
+	 *	Token byte (first byte of first frame, must be non-zero)
+	 *	HB0 to HB2	 from AVI IF (3 bytes header)
+	 *	PB0 to PB27 from AVI IF (28 bytes data)
+	 * So it should look like this
+	 *	first block: | <token> <HB0-HB2> <DB0-DB3> |
+	 *	next 3 blocks: |<DB4-DB11>|<DB12-DB19>|<DB20-DB28>|
+	 */
+
+	if (len > LSPCON_PARADE_AVI_IF_DATA_SIZE - 1) {
+		DRM_ERROR("Invalid length of infoframes\n");
+		return false;
+	}
+
+	memcpy(&avi_if[1], frame, len);
+
+	if (!_lspcon_parade_write_infoframe_blocks(aux, avi_if)) {
+		DRM_DEBUG_KMS("Failed to write infoframe blocks\n");
+		return false;
+	}
+
+	return true;
+}
+
 static bool _lspcon_write_avi_infoframe_mca(struct drm_dp_aux *aux,
 					    const uint8_t *buffer, ssize_t len)
 {
@@ -304,7 +415,7 @@ void lspcon_write_infoframe(struct drm_encoder *encoder,
 			    unsigned int type,
 			    const void *frame, ssize_t len)
 {
-	bool ret = true;
+	bool ret;
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 	struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
 
@@ -315,6 +426,10 @@ void lspcon_write_infoframe(struct drm_encoder *encoder,
 	if (lspcon->vendor == LSPCON_VENDOR_MCA)
 		ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux,
 						      frame, len);
+	else
+		ret = _lspcon_write_avi_infoframe_parade(&intel_dp->aux,
+							 frame, len);
+
 	if (!ret) {
 		DRM_ERROR("Failed to write AVI infoframes\n");
 		return;
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v10 8/8] drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON

[Shashank Sharma]

LSPCON chips can generate YCBCR outputs, if asked nicely :).

In order to generate YCBCR 4:2:0 outputs, a source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:2:0 in AVI infoframes

Whereas for YCBCR 4:4:4 outputs, the source must:
- send YCBCR 4:4:4 signals to LSPCON
- program color space as 4:4:4 in AVI infoframes

So for both 4:2:0 as well as 4:4:4 outputs, we are driving the
pipe for YCBCR 4:4:4 output, but AVI infoframe's color space
information indicates LSPCON FW to start scaling down from YCBCR
4:4:4 and generate YCBCR 4:2:0 output. As the scaling is done by
LSPCON device, we need not to reserve a scaler for 4:2:0 outputs.

V2: rebase
V3: Addressed review comments from Ville
    - add enum crtc_output_format instead of bool ycbcr420
    - use crtc_output_format=4:4:4 for modeset of LSPCON 4:2:0 output
      cases in this way we will have YCBCR 4:4:4 framework ready (except
      the ABI part)
V4: Added r-b from Maarten (for v3)
    Addressed review comments from Ville:
    - Do not add a non-atomic state variable to determine lspcon output.
      Instead add bool in CRTC state to indicate lspcon based scaling.
V5: Addressed review comments from Ville:
    - Change the state bool name from external scaling to something more
      relavent.
    - Keep the info and adjusted_mode structures const.
    - use crtc_state instead of pipe_config.
    - Push all the config change into lspcon_ycbcr420_config function.
V6: Rebase, small changes to accommodate changes in patch 2.
V7: Fixed checkpatch warnings for alignment
V8: Rebase

    PS: Ignored following warnings to match the current formatting:
    drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
     -:53: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
    #53: FILE: drivers/gpu/drm/i915/i915_reg.h:8721:
    +#define  TRANS_MSA_SAMPLING_444        (2<<1)
                                          ^
    -:54: CHECK:SPACING: spaces preferred around that '<<' (ctx:VxV)
    #54: FILE: drivers/gpu/drm/i915/i915_reg.h:8722:
    +#define  TRANS_MSA_CLRSP_YCBCR         (2<<3)
V9: Rebase
V10: Rebase

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      |  2 ++
 drivers/gpu/drm/i915/intel_ddi.c     |  7 +++++++
 drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++
 drivers/gpu/drm/i915/intel_dp.c      |  4 ++++
 drivers/gpu/drm/i915/intel_drv.h     |  5 +++++
 drivers/gpu/drm/i915/intel_lspcon.c  | 26 ++++++++++++++++++++++++++
 6 files changed, 56 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 17575cf..f3e58a9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9241,6 +9241,8 @@ enum skl_power_gate {
 #define TRANS_MSA_MISC(tran) _MMIO_TRANS2(tran, _TRANSA_MSA_MISC)
 
 #define  TRANS_MSA_SYNC_CLK		(1 << 0)
+#define  TRANS_MSA_SAMPLING_444		(2 << 1)
+#define  TRANS_MSA_CLRSP_YCBCR		(2 << 3)
 #define  TRANS_MSA_6_BPC		(0 << 5)
 #define  TRANS_MSA_8_BPC		(1 << 5)
 #define  TRANS_MSA_10_BPC		(2 << 5)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 148bfaa..0db3e22 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1703,6 +1703,13 @@ void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state)
 		break;
 	}
 
+	/*
+	 * As per DP 1.2 spec section 2.3.4.3 while sending
+	 * YCBCR 444 signals we should program MSA MISC1/0 fields with
+	 * colorspace information. The output colorspace encoding is BT601.
+	 */
+	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
+		temp |= TRANS_MSA_SAMPLING_444 | TRANS_MSA_CLRSP_YCBCR;
 	I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3384129..883c897 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7827,6 +7827,8 @@ static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	enum intel_output_format output = INTEL_OUTPUT_FORMAT_RGB;
 
+	pipe_config->lspcon_downsampling = false;
+
 	if (IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9) {
 		u32 tmp = I915_READ(PIPEMISC(crtc->pipe));
 
@@ -7844,6 +7846,16 @@ static void intel_get_crtc_ycbcr_config(struct intel_crtc *crtc,
 				else
 					output = INTEL_OUTPUT_FORMAT_YCBCR420;
 			} else {
+				/*
+				 * Currently there is no interface defined to
+				 * check user preference between RGB/YCBCR444
+				 * or YCBCR420. So the only possible case for
+				 * YCBCR444 usage is driving YCBCR420 output
+				 * with LSPCON, when pipe is configured for
+				 * YCBCR444 output and LSPCON takes care of
+				 * downsampling it.
+				 */
+				pipe_config->lspcon_downsampling = true;
 				output = INTEL_OUTPUT_FORMAT_YCBCR444;
 			}
 		}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5d907a2..ef355d9 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2000,6 +2000,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+	struct intel_lspcon *lspcon = enc_to_intel_lspcon(&encoder->base);
 	enum port port = encoder->port;
 	struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
 	struct intel_connector *intel_connector = intel_dp->attached_connector;
@@ -2012,6 +2013,9 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 		pipe_config->has_pch_encoder = true;
 
 	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
+	if (lspcon->active)
+		lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
+
 	pipe_config->has_drrs = false;
 	if (IS_G4X(dev_priv) || port == PORT_A)
 		pipe_config->has_audio = false;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 2cc0775..9f3499b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -904,6 +904,9 @@ struct intel_crtc_state {
 
 	/* Output format RGB/YCBCR etc */
 	enum intel_output_format output_format;
+
+	/* Output down scaling is done in LSPCON device */
+	bool lspcon_downsampling;
 };
 
 struct intel_crtc {
@@ -2203,6 +2206,8 @@ void lspcon_set_infoframes(struct drm_encoder *encoder,
 			   const struct drm_connector_state *conn_state);
 bool lspcon_infoframe_enabled(struct drm_encoder *encoder,
 			      const struct intel_crtc_state *pipe_config);
+void lspcon_ycbcr420_config(struct drm_connector *connector,
+			    struct intel_crtc_state *crtc_state);
 
 /* intel_pipe_crc.c */
 #ifdef CONFIG_DEBUG_FS
diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index 8e0477e..447b454 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -180,6 +180,21 @@ static bool lspcon_wake_native_aux_ch(struct intel_lspcon *lspcon)
 	return true;
 }
 
+void lspcon_ycbcr420_config(struct drm_connector *connector,
+			    struct intel_crtc_state *crtc_state)
+{
+	const struct drm_display_info *info = &connector->display_info;
+	const struct drm_display_mode *adjusted_mode =
+					&crtc_state->base.adjusted_mode;
+
+	if (drm_mode_is_420_only(info, adjusted_mode) &&
+	    connector->ycbcr_420_allowed) {
+		crtc_state->port_clock /= 2;
+		crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR444;
+		crtc_state->lspcon_downsampling = true;
+	}
+}
+
 static bool lspcon_probe(struct intel_lspcon *lspcon)
 {
 	int retry;
@@ -465,6 +480,15 @@ void lspcon_set_infoframes(struct drm_encoder *encoder,
 		return;
 	}
 
+	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) {
+		if (crtc_state->lspcon_downsampling)
+			frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
+		else
+			frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
+	} else {
+		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
+	}
+
 	drm_hdmi_avi_infoframe_quant_range(&frame.avi, mode,
 					   crtc_state->limited_color_range ?
 					   HDMI_QUANTIZATION_RANGE_LIMITED :
@@ -518,6 +542,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)
 	struct intel_lspcon *lspcon = &intel_dig_port->lspcon;
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct drm_connector *connector = &dp->attached_connector->base;
 
 	if (!HAS_LSPCON(dev_priv)) {
 		DRM_ERROR("LSPCON is not supported on this platform\n");
@@ -542,6 +567,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)
 		return false;
 	}
 
+	connector->ycbcr_420_allowed = true;
 	lspcon->active = true;
 	DRM_DEBUG_KMS("Success: LSPCON init\n");
 	return true;
-- 
2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.CHECKPATCH: warning for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev11)

[Patchwork]

== Series Details ==

Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev11)
URL   : https://patchwork.freedesktop.org/series/36068/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
b96e44106d65 drm/i915: Introduce CRTC output format
2cc560ee9457 drm/i915: Add CRTC output format YCBCR 4:2:0
264fd343ba9e drm/i915: Add CRTC output format YCBCR 4:4:4
4bbb3f453eff drm/i915: Check LSPCON vendor OUI
78358522aa0e drm/i915: Add AVI infoframe support for LSPCON
10899f3f2fd2 drm/i915: Write AVI infoframes for MCA LSPCON
-:94: CHECK:BRACES: Blank lines aren't necessary after an open brace '{'
#94: FILE: drivers/gpu/drm/i915/intel_lspcon.c:254:
+	while (val < len) {
+

-:98: CHECK:BRACES: braces {} should be used on all arms of this statement
#98: FILE: drivers/gpu/drm/i915/intel_lspcon.c:258:
+			if (ret == 1)
[...]
+			else if (retry < 4) {
[...]
+			} else {
[...]

total: 0 errors, 0 warnings, 2 checks, 119 lines checked
e2a2a436e94b drm/i915: Write AVI infoframes for Parade LSPCON
718980d15cf8 drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.BAT: success for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev11)

[Patchwork]

== Series Details ==

Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev11)
URL   : https://patchwork.freedesktop.org/series/36068/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4664 -> Patchwork_9934 =

== Summary - SUCCESS ==

  No regressions found.

  External URL: https://patchwork.freedesktop.org/api/1.0/series/36068/revisions/11/mbox/

== Known issues ==

  Here are the changes found in Patchwork_9934 that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@drv_selftest@live_hangcheck:
      fi-skl-6600u:       PASS -> DMESG-FAIL (fdo#106560, fdo#107174)

    igt@drv_selftest@live_workarounds:
      fi-cnl-psr:         PASS -> DMESG-FAIL (fdo#107292)

    igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
      fi-bxt-dsi:         PASS -> INCOMPLETE (fdo#103927)

    igt@prime_vgem@basic-fence-flip:
      fi-ilk-650:         PASS -> FAIL (fdo#104008)

    
    ==== Possible fixes ====

    igt@drv_selftest@live_hangcheck:
      fi-skl-guc:         DMESG-FAIL (fdo#107174, fdo#106685) -> PASS

    igt@kms_chamelium@dp-crc-fast:
      fi-kbl-7500u:       DMESG-FAIL (fdo#103841) -> PASS

    
  fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
  fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
  fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
  fdo#106560 https://bugs.freedesktop.org/show_bug.cgi?id=106560
  fdo#106685 https://bugs.freedesktop.org/show_bug.cgi?id=106685
  fdo#107174 https://bugs.freedesktop.org/show_bug.cgi?id=107174
  fdo#107292 https://bugs.freedesktop.org/show_bug.cgi?id=107292


== Participating hosts (54 -> 48) ==

  Missing    (6): fi-ilk-m540 fi-hsw-4200u fi-byt-j1900 fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 


== Build changes ==

    * Linux: CI_DRM_4664 -> Patchwork_9934

  CI_DRM_4664: 19e458884fe1d8d10e453529933199250cc8821f @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_4593: c88e219c6e890d89b7836c5e248ffedf334d55a2 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_9934: 718980d15cf88d899a98a7025de083cc49e9b71f @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

718980d15cf8 drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
e2a2a436e94b drm/i915: Write AVI infoframes for Parade LSPCON
10899f3f2fd2 drm/i915: Write AVI infoframes for MCA LSPCON
78358522aa0e drm/i915: Add AVI infoframe support for LSPCON
4bbb3f453eff drm/i915: Check LSPCON vendor OUI
264fd343ba9e drm/i915: Add CRTC output format YCBCR 4:4:4
2cc560ee9457 drm/i915: Add CRTC output format YCBCR 4:2:0
b96e44106d65 drm/i915: Introduce CRTC output format

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9934/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.BAT: success for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev12)

[Patchwork]

== Series Details ==

Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev12)
URL   : https://patchwork.freedesktop.org/series/36068/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4664 -> Patchwork_9935 =

== Summary - SUCCESS ==

  No regressions found.

  External URL: https://patchwork.freedesktop.org/api/1.0/series/36068/revisions/12/mbox/

== Known issues ==

  Here are the changes found in Patchwork_9935 that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@debugfs_test@read_all_entries:
      fi-snb-2520m:       PASS -> INCOMPLETE (fdo#103713)

    igt@drv_module_reload@basic-reload-inject:
      fi-hsw-4770r:       PASS -> DMESG-WARN (fdo#107425)

    igt@drv_selftest@live_workarounds:
      {fi-bsw-kefka}:     PASS -> DMESG-FAIL (fdo#107292)
      fi-skl-6700k2:      PASS -> DMESG-FAIL (fdo#107292)

    igt@kms_pipe_crc_basic@nonblocking-crc-pipe-b-frame-sequence:
      {fi-byt-clapper}:   PASS -> FAIL (fdo#103191, fdo#107362)

    
    ==== Possible fixes ====

    igt@drv_selftest@live_coherency:
      fi-gdg-551:         DMESG-FAIL (fdo#107164) -> PASS

    igt@drv_selftest@live_hangcheck:
      fi-skl-guc:         DMESG-FAIL (fdo#107174, fdo#106685) -> PASS

    igt@gem_exec_suspend@basic-s4-devices:
      fi-kbl-7500u:       DMESG-WARN (fdo#107139, fdo#105128) -> PASS

    igt@kms_chamelium@dp-crc-fast:
      fi-kbl-7500u:       DMESG-FAIL (fdo#103841) -> PASS

    
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  fdo#103191 https://bugs.freedesktop.org/show_bug.cgi?id=103191
  fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
  fdo#103841 https://bugs.freedesktop.org/show_bug.cgi?id=103841
  fdo#105128 https://bugs.freedesktop.org/show_bug.cgi?id=105128
  fdo#106685 https://bugs.freedesktop.org/show_bug.cgi?id=106685
  fdo#107139 https://bugs.freedesktop.org/show_bug.cgi?id=107139
  fdo#107164 https://bugs.freedesktop.org/show_bug.cgi?id=107164
  fdo#107174 https://bugs.freedesktop.org/show_bug.cgi?id=107174
  fdo#107292 https://bugs.freedesktop.org/show_bug.cgi?id=107292
  fdo#107362 https://bugs.freedesktop.org/show_bug.cgi?id=107362
  fdo#107425 https://bugs.freedesktop.org/show_bug.cgi?id=107425


== Participating hosts (54 -> 49) ==

  Missing    (5): fi-ctg-p8600 fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-hsw-4200u 


== Build changes ==

    * Linux: CI_DRM_4664 -> Patchwork_9935

  CI_DRM_4664: 19e458884fe1d8d10e453529933199250cc8821f @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_4593: c88e219c6e890d89b7836c5e248ffedf334d55a2 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_9935: 7219dd268d7576d29248c4936d1e11d20fd92c5b @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

7219dd268d75 drm/i915: Add YCBCR 4:2:0/4:4:4 support for LSPCON
68ef036f97ec drm/i915: Write AVI infoframes for Parade LSPCON
035c33d9a65a drm/i915: Write AVI infoframes for MCA LSPCON
db069f765d9f drm/i915: Add AVI infoframe support for LSPCON
98b9089d8e0b drm/i915: Check LSPCON vendor OUI
d6d1c36b536f drm/i915: Add CRTC output format YCBCR 4:4:4
f3f948d3f545 drm/i915: Add CRTC output format YCBCR 4:2:0
b34adc8cecfb drm/i915: Introduce CRTC output format

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9935/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.IGT: success for YCBCR 4:2:0/4:4:4 output support for LSPCON (rev12)

[Patchwork]

== Series Details ==

Series: YCBCR 4:2:0/4:4:4 output support for LSPCON (rev12)
URL   : https://patchwork.freedesktop.org/series/36068/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4664_full -> Patchwork_9935_full =

== Summary - WARNING ==

  Minor unknown changes coming with Patchwork_9935_full need to be verified
  manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in Patchwork_9935_full, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  

== Possible new issues ==

  Here are the unknown changes that may have been introduced in Patchwork_9935_full:

  === IGT changes ===

    ==== Warnings ====

    igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-blt:
      shard-hsw:          PASS -> SKIP

    
== Known issues ==

  Here are the changes found in Patchwork_9935_full that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@kms_flip@flip-vs-expired-vblank:
      shard-glk:          PASS -> FAIL (fdo#105363, fdo#102887)

    
    ==== Possible fixes ====

    igt@drv_suspend@shrink:
      shard-glk:          INCOMPLETE (k.org#198133, fdo#103359, fdo#106886) -> PASS

    igt@kms_cursor_legacy@cursor-vs-flip-toggle:
      shard-hsw:          FAIL (fdo#103355) -> PASS

    igt@perf@polling:
      shard-hsw:          FAIL (fdo#102252) -> PASS

    
  fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
  fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
  fdo#103355 https://bugs.freedesktop.org/show_bug.cgi?id=103355
  fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
  fdo#105363 https://bugs.freedesktop.org/show_bug.cgi?id=105363
  fdo#106886 https://bugs.freedesktop.org/show_bug.cgi?id=106886
  k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133


== Participating hosts (5 -> 5) ==

  No changes in participating hosts


== Build changes ==

    * Linux: CI_DRM_4664 -> Patchwork_9935

  CI_DRM_4664: 19e458884fe1d8d10e453529933199250cc8821f @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_4593: c88e219c6e890d89b7836c5e248ffedf334d55a2 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_9935: 7219dd268d7576d29248c4936d1e11d20fd92c5b @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_9935/shards.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx